How many horsepower can I get from this engine (SR20VE) totally fully build?
How many horsepower can I get from this engine (SR20VE) totally fully build?
i have seen high 2's from that motor.. tuned
I♥my ruckus
You're the trashiest thing this side of the Mississippi.
Ghetto Fab: For kids on a fucking budget
~Lagg Squad~
<turbo negros>
I put the sexy in dyslexia.
R.I.P steven bond....
Probably 250-270ish. There are a few people in the 220-230whp range without head work or going into the block. Most people with n1 cams and boltons are 200-210 whp. Im at the horizon of 200 with mine with n1 cams, but I havent touched the head or compression or intake manifold etc... Im droping in some 12.5:1 pistons in mine, sending the head to get the works and a new intake manifold made along with a better header, and tuning. Im expecting about 230-240whp. Im pulling the motor out my b13 sentra and putting it in a fully stipped ae86. So at about 1900lbs with 220+whp, the thing should move.
I'm not sure about 260WHP. Andreas Miko is building his bored to a 2.4 if I'm mistaken and he is shooting for 250WHP at the most and this guys knows what he is doing.
You can probably squeeze 210WHP with the N1 cams and well tuned.
"If you want peace, prepare for war"
one of the funnest motors to drive. loudest vtak evar!
wat is good my sr20 brothers...
snail where you been hiding, i c you got big plans..
mr. 200 you need to do an ve-t..
seriousb13 you need to get bak in the game dawg..
92 sentra ve'd
COME GET SOME!! 191whp 150wtq N/A