What do you guys use to tint your tail lights? Spray or sticker?
how did you tint your lights?
What do you guys use to tint your tail lights? Spray or sticker?
I used a marker. A crayola marker to be exact.
K series 626. That's right. It's got a K in it.
both...
I asked a girl if i could buy her a drink, she said I have a boyfriend, so I said, well i have a goldfish, she said what? I replied, oh I'm sorry I thought we were talking about shit that doesnt matter.
night shades its a spray, look on ebay, your gonna need to buff them or they wont be shiny
HF
night shades, 2000 grit, and krylon clearcoat for plastics.
2011 Camero - Fast
1998 T/A - Slow
Explain ur methed...Originally Posted by GhostRL
~TDR
spray night shades, sand it down, spray clear,
or you could spray, clear, the sand with 2000 and buff to a shine
HF
Spray nite shades a tad darker then you'd like it to be when you're done. Sand with 2000 grit paper wet, rub out with compound, clean with alcohol/surface prep, spray krylon clearcoat until glossy.
2011 Camero - Fast
1998 T/A - Slow
Take out lights, sad down with like 1000 grit paper. Spray niteshades in slow (LIGHT) coats untill desired darkness. It dries slow, this will be a few hour project, and let it dry atleast 2-3 hours. Trust me.
Honda RC51 SP1
Yoshi RS-3 Cans
520 Conversion
Clip Ons
Race Tech Fork Kit
its pretty much just black spray paint mixed with clear coat.
if you have a spray gun, just get some clear and put like 6 drops of black in there, just a HS black, no metallics, unless you want some. and mix it up and spray, wet sand and buff if you want.
to prep, either use a gray scotch bright and some PPG scuff paste, or 1k wet sand will work too.
so 1k grit sand paper, some cans of tint, a can or two of clear, and some Time. Got ya... Ill do this later this week...
~TDR
clear/black mix sprayed from a gun.
Posting Permissions
Reply With Quote
