horsepower expectations???

[patrick4588]

SC34 or GT28RS turbo. 750cc injectors will also suffice.

just dont get the rc 750cc saturated injectors. get a peak and hold injector for that high of cc.

[bernard]

Well you have a very good motor setup, are you going to use this as a daily driver? If so, with the price of gas and then the size of your injectors will play a key. But if not, you will need a bigger set of inj, and a bigger turbo. For that setup, 60-1. And you will be good togo. But with the current setup you have now, i wanna say 300-380 whp. Considering you have good head work done. Nice job.

[GAtegs]

just dont get the rc 750cc saturated injectors. get a peak and hold injector for that high of cc.

Saturated 750s will be fine

[patrick4588]

Saturated 750s will be fine

Please stay away from these. The reason why they are the only company willing to make a saturated injector that size is because of the fact they are taking a 440cc saturated injector and modifying the pintle of the injector to flow at a higher rate, so that a resistor box isn't needed. This is supposedly a way to have the best of 2 worlds. Saturated, but can still have a higher flow rate. What they DON'T tell you is that you are on borrowed time with them, because even though they altered the pintle and signal interrupt to flow the higher level, it is still a 440cc pintle, so it will fail prematurely. Get a set of Peak & hold injectors, resistor box, and get reliable.

[GAtegs]

Please stay away from these. The reason why they are the only company willing to make a saturated injector that size is because of the fact they are taking a 440cc saturated injector and modifying the pintle of the injector to flow at a higher rate, so that a resistor box isn't needed. This is supposedly a way to have the best of 2 worlds. Saturated, but can still have a higher flow rate. What they DON'T tell you is that you are on borrowed time with them, because even though they altered the pintle and signal interrupt to flow the higher level, it is still a 440cc pintle, so it will fail prematurely. Get a set of Peak & hold injectors, resistor box, and get reliable.

Have you owned a set? Or are you just quoting some **** that you heard someone else say that probably just heard it from someone else?

I have been running these injectors from almost 40,000 miles now and had ZERO issues with them.

[iloveboost]

A GT30R is still laggy for a daily driven street car. If you want a FUN, fast spooling turbo to make 400whp, get the GT28RS.

The GT30R won't spool until nearly 5,000RPMs.

[Vteckidd]

A GT30R is still laggy for a daily driven street car. If you want a FUN, fast spooling turbo to make 400whp, get the GT28RS.

The GT30R won't spool until nearly 5,000RPMs.

Dans spools at 4200 (2.ol engine)

I have a car here wit ha GT28RS and its a 2.0l B20VTEC, it has full boost at 3000rpms an is almost impossible to drive on the street. (spins instantly.) ask scotty

a 30R is fine for a street car.

Hell you should know, a 35R was on your street car

[BABY J]

A GT30R is still laggy for a daily driven street car. If you want a FUN, fast spooling turbo to make 400whp, get the GT28RS.

The GT30R won't spool until nearly 5,000RPMs.

This is a H22 right? 2.2L? The 30R should do fine. If it was on an 1.8l motor I'd agree.

[iloveboost]

30R might spool at 4,200, but it won't reach full spool until about 5,000.

I hooked on the street with 510whp with Azenis (after 60mph). Maybe he should get better tires if he's going to invest all of that money in his set up to make the most of it.

[patrick4588]

Have you owned a set? Or are you just quoting some **** that you heard someone else say that probably just heard it from someone else?

I have been running these injectors from almost 40,000 miles now and had ZERO issues with them.

more than one person i know has had them fail. i have never owned a set because of the negative feedback they have gotten. i currently have RC 1000cc