horsepower expectations???

[GAtegs]

Please stay away from these. The reason why they are the only company willing to make a saturated injector that size is because of the fact they are taking a 440cc saturated injector and modifying the pintle of the injector to flow at a higher rate, so that a resistor box isn't needed. This is supposedly a way to have the best of 2 worlds. Saturated, but can still have a higher flow rate. What they DON'T tell you is that you are on borrowed time with them, because even though they altered the pintle and signal interrupt to flow the higher level, it is still a 440cc pintle, so it will fail prematurely. Get a set of Peak & hold injectors, resistor box, and get reliable.

Have you owned a set? Or are you just quoting some **** that you heard someone else say that probably just heard it from someone else?

I have been running these injectors from almost 40,000 miles now and had ZERO issues with them.

[iloveboost]

A GT30R is still laggy for a daily driven street car. If you want a FUN, fast spooling turbo to make 400whp, get the GT28RS.

The GT30R won't spool until nearly 5,000RPMs.

[Vteckidd]

A GT30R is still laggy for a daily driven street car. If you want a FUN, fast spooling turbo to make 400whp, get the GT28RS.

The GT30R won't spool until nearly 5,000RPMs.

Dans spools at 4200 (2.ol engine)

I have a car here wit ha GT28RS and its a 2.0l B20VTEC, it has full boost at 3000rpms an is almost impossible to drive on the street. (spins instantly.) ask scotty

a 30R is fine for a street car.

Hell you should know, a 35R was on your street car

[BABY J]

A GT30R is still laggy for a daily driven street car. If you want a FUN, fast spooling turbo to make 400whp, get the GT28RS.

The GT30R won't spool until nearly 5,000RPMs.

This is a H22 right? 2.2L? The 30R should do fine. If it was on an 1.8l motor I'd agree.

[iloveboost]

30R might spool at 4,200, but it won't reach full spool until about 5,000.

I hooked on the street with 510whp with Azenis (after 60mph). Maybe he should get better tires if he's going to invest all of that money in his set up to make the most of it.

[JKOBD]

30R might spool at 4,200, but it won't reach full spool until about 5,000.

I hooked on the street with 510whp with Azenis (after 60mph). Maybe he should get better tires if he's going to invest all of that money in his set up to make the most of it.

30R would be perfect for a 2.2. Azenis tires sucks for drag racing. I think He already has the AVC-R and can setup the boost by gear. A decent set of drag radials and that and he will be fine.

[patrick4588]

Have you owned a set? Or are you just quoting some **** that you heard someone else say that probably just heard it from someone else?

I have been running these injectors from almost 40,000 miles now and had ZERO issues with them.

more than one person i know has had them fail. i have never owned a set because of the negative feedback they have gotten. i currently have RC 1000cc