turbo gsr question .....

[SpooL'DGsR]

Man I know you stay somewhere around where I work, hit me up w/ a address, I'd love to come check that thing out or give you a hand getting it back together.

i will definetly let you know by saturday.

[Big J]

I'll probably be at the shop tomorrow changing out a thermostat

[lsi-crvtec]

That set up is good......for 400WHP

[SpooL'DGsR]

That set up is good......for 400WHP

thanks.

[highspeed]

i had a similar setup in my da......let scotty tune it......change the injectors and listen to the posts that have already been made....other wise you have got a good good setup....I made 318whp with rc440 and lsvtec with similar internals and that was almost too much for the street.....damn thing would get crazy in third gear on the xpress way.....good luck and want to know the nums when you get it tuned

[SpooL'DGsR]

i had a similar setup in my da......let scotty tune it......change the injectors and listen to the posts that have already been made....other wise you have got a good good setup....I made 318whp with rc440 and lsvtec with similar internals and that was almost too much for the street.....damn thing would get crazy in third gear on the xpress way.....good luck and want to know the nums when you get it tuned

you got it homie. did you max out your injectors @ 318 hp ?

[Tech5]

nice very nice good luck

i have finally come to the end of my build and was wondering if i need to do anything else before i put the motor back together. i have everything minus sleeves.
* forged je pistons 81mm ( 9:1) with manlley rods
*str block gaurd
*gsr head with itr valetrain ( 5 angled valve job , ported and polished )
* honed/ decked/ hot tanked gsr block
* balanced and blueprinted gsr crank
*victor x intake manifold
* presicion sc61 dual ball bearing turbo
*650cc rc saturated injectors
* ramhorn peakboost turbo manifold
*acl main/rod bearings
*cometic 3 layer head gasket
*greddy fmic
* 3 inch turbo back exhaust ( turbo n1)
*p28 with chrome pro and conversion harness
* all the ic pipings

i know i have forgot some stuff , but you get the idea. i an hoping to be in the 350hp-375hp range. is it possible with this set up ?? lemme know what yall think.

[SpooL'DGsR]

^^ thanks homie.

[HatchHero]

I'd personally get a port and polish. I regretted not gettin that done. Don't forget the plastigauge and torque wrench!

rite on

[patrick4588]

is this thing running yet?

[SpooL'DGsR]

well i hit a little snag with the map sensor and had to order another one. will be running real soon.

[patrick4588]

nice. think you can have it done before the track closes? i know silver dollar closes at the end of the month. im tryin to be able to make it out there. if you get yours done, we should meet up out there. would be cool to see two turbo gsr's running.

[ballistic08]

what about ARP headstuds? idk how strong the stock bolts are.

[SpooL'DGsR]

nice. think you can have it done before the track closes? i know silver dollar closes at the end of the month. im tryin to be able to make it out there. if you get yours done, we should meet up out there. would be cool to see two turbo gsr's running.

yes should be done this weekend. so i will shoot you a pm and we could head down to the track.

[SpooL'DGsR]

what about ARP headstuds? idk how strong the stock bolts are.

i have golden eagle headstuds so i should be good.

[patrick4588]

ill be up that way to get tuned this weekend or early next week as long as the motor is fine. starting it up tonight. **crosses fingers**

[SpooL'DGsR]

ill be up that way to get tuned this weekend or early next week as long as the motor is fine. starting it up tonight. **crosses fingers**

*** crossing my fingers also ***

[patrick4588]

update update!!!