2001 trans am vs 2010 camero

[T.S.]

You guys were talking about a car under 65k that could compete, I say the Audi RS4 420hp awd v8. =)

[blake06gto]

I thought rs4 new ran around the 80 mark? But I will agree with its badassness lol. I love the Rs4

[T.S.]

The convertibles do but you can get an rs4 for right at 65k. Dont know that I would pay that much for that car, would rather have an 2003 RS6 instead I think. Which is the 4.2l with twin turbo's. =) And you can pick those up for about 30-40k right now. But they were in the 80's new.

[georgiasmurf]

yeah there a great car i would love to have one in the future

[Slomaro Z28]

Lets go for May 28th @ Commerce.

[blake06gto]

Lets go for May 28th @ Commerce.

i cant guarantee ill still be stock by then... we'll see though.

[Slomaro Z28]

i cant guarantee ill still be stock by then... we'll see though.

That's fine, I am expecting 13's on street tires and low boost......we'll see. I'm sure I have plenty enough for the WS6 though and probably your SS from a roll ()

[blake06gto]

That's fine, I am expecting 13's on street tires and low boost......we'll see. I'm sure I have plenty enough for the WS6 though and probably your SS from a roll ()

[T.S.]

That's fine, I am expecting 13's on street tires and low boost......we'll see. I'm sure I have plenty enough for the WS6 though and probably your SS from a roll ()

Depends what he does to it.. LOL those motors respond retarded well to mods.. =) best of luck either way though!

[georgiasmurf]

well dam im srry i miss understood him i was just saying an opinon so im srry

[Slomaro Z28]

well dam im srry i miss understood him i was just saying an opinon so im srry

Don't worry, you'll learn fast here.

[onebadgt]

stock ws6 and havnt lost a race yet? maybe you should stop racing v6s then lol

[georgiasmurf]

and by the way guys im not ragging on camaro's hell we have two of them ourselfs and i love them

[blake06gto]

Cai headers exhaust and cam is what I'm gunning for. Avg power with the mods is 450-470whp from what I've seen.

[DieselNuts]

Cai headers exhaust and cam is what I'm gunning for. Avg power with the mods is 450-470whp from what I've seen.

My cousin's '10 SS made 403hp/410tq with JUST American Racing Headers, cat delete and tune. With an aggressive enough cam and decked heads, I have no doubts that 500rwhp is attainable. Blake, do you do your work yourself or do you go to a shop?

[blake06gto]

My cousin's '10 SS made 403hp/410tq with JUST American Racing Headers, cat delete and tune. With an aggressive enough cam and decked heads, I have no doubts that 500rwhp is attainable. Blake, do you do your work yourself or do you go to a shop?

for just the bolt ons.. i can do myself. Ive never done a cam install but have a few people that are willing to help me out cause i want to be able to do it on my own. tuning... i leave to the shops.

[DieselNuts]

for just the bolt ons.. i can do myself. Ive never done a cam install but have a few people that are willing to help me out cause i want to be able to do it on my own. tuning... i leave to the shops.

That's cool. My tuner know's his shit and only charges $50/hr + the initial credit to purchase the rights to the VIN which is typically $100 depending on the vehicle. His install prices are also about half of what the big shops charge but i'm willing to bet that he pays more attention to detail and does better quality work than said big shops. I would also be willing to bet that his knowledge on the LSX platforms surpasses that of the big shops. His name is Josh and he can be reached on LS1Tech.com (screen name Damian) or I can PM you his phone number. Let me know if you're interested.

[blake06gto]

go ahead and pm his number over. i had already considered him to tune it cause he did a nice job on eric's g8.

[Slomaro Z28]

I was referring to the SS being stock, when I said I might take it from a roll.

[REV.olution]

This is funny. pissing contest over street racing. I like the Commerce idea, I may be down.

[On_Her_Face]

Then On_Her_Face pulls up, rapes both.

Sick race.

[T.S.]

Then On_Her_Face pulls up, rapes both.

Sick race.

[Mantooth]

lol.

[DieselNuts]

lol.

The quote in your sig is epic

[Mantooth]

The quote in your sig is epic

[On_Her_Face]

Lies you know I'm not gay.

[georgiasmurf]

how is everyone doing

[Mantooth]

how is everyone doing

Bored, wanting to race something, and wanting people to believe mah killz stories.

[georgiasmurf]

awwwwwwwwwwwwwwwwwwww im srry its ok i belive you lol

[Mantooth]

awwwwwwwwwwwwwwwwwwww im srry its ok i belive you lol

Thx, bby.

P.S., no homo.

[Spartinja]

The 241 heads are superior castings.

In what way???

I have flowed 853's, 806's, and 241's all side by side on a bench. There is about a 3cfm difference between all of them.

[Dietcoke]

The 241s have slight more 'meat' to work with is what my head porter told me (Lloyd Elliot), even though they all have roughly the same numbers out of the box. On a piggy bank budget, they'd be the best heads to have ported if you couldnt snag a decent set of LS6 heads (243)

[Cameron.]

op i got a 6 cylinder i promise you wont beat, but it wouldnt be a fair race. hahah..

[Spartinja]

That being said, I've got a set of 241 castings for sale if anybody needs a set.

[Evil Goat]

Well no punctuation, and the cognitive and spelling ability of a first grader doesn't really lean to being well-understood.

i've noticed you're a whiny bitch about everything.....just sayin'

lsx motors with heads and a cam are nasty cars. they love the giggle gas too.

over 100 passes on 150w with this stock bottom end and not one single problem....200 goes in maybe sometime this week since the teg went boom last night

[Dietcoke]

i've noticed you're a whiny bitch about everything.....just sayin'



over 100 passes on 150w with this stock bottom end and not one single problem....200 goes in maybe sometime this week since the teg went boom last night

Your tears are delicious. When I get back to the states Julyish lets run em. Should be entertaining. Goat runs high 10s right?

[Donati03gt]

r6 > ws6

[Evil Goat]

ready when you are

[geoff]

I want some man. what is the deal? noone wants a piece of an lt1?