Nahhhh let him talk, let it all outOriginally Posted by Siverprobegt
![]()
Nahhhh let him talk, let it all outOriginally Posted by Siverprobegt
![]()
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
It would just be another one of these http://www.youtube.com/watch?v=WEDWe6YFlqI![]()
![]()
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
subscribed![]()
"I'm not a gynecologist... but I'll take a look."![]()
![]()
Lmao mr tony sir u have ur one moment and like I said I basically gave u the win by starting in 3rd u got beat by a torqueless motor and I would have spanked u again and again if we started in the same gear just wait ill give you something to talk about and to silverprobegt I don't believe in bad luck I believe in doing it right the first time and tony eat a cupcake fagboy
Soon!!
Originally Posted by allmotorX
lulz ok put your date, time and money up. I'm done talking now actions speak louder than words homie. It's not my fault you were scared to come to a complete stop and had to make sure you were close to pop'n VTEC because you knew you would get drug as proven already![]()
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
your taking that win to your fathead i see well in about 2-3weeks maybe more ill shut yor mouth once and for all just have your motor runnin right and make sure vtec is working dont wont any excuses :idb:Originally Posted by EJ1soSlo
Soon!!
So it's going down this Tuesday at 10:30? Cool. I'll be there and anxiously waiting. My question was never answered as far as who's gonna be doing the filming and all. Let's pray for no broken trannies. And I'm not just talking about Kevin's shit...... I'm talking about mine tooOriginally Posted by allmotorX
![]()
No VTEC and he was pulling very well without it. Imagine if VTEC was working? Hell, what if he had the right ecu to go with it? :idb:Originally Posted by shittalkerX
K series 626. That's right. It's got a K in it.
lol u havent driven his car so who are you to say if his vtec was workin u killin me with that assumption if and if it wasnt working i would have drug his shit even worse fuck both you pricks im outOriginally Posted by blackshine007
Soon!!
ill film if i can get my boy to come out
Soon!!
Unless he has a vtec controller, vtec won't be able to engage if the 6500 rev limiter is kicking on. Why else was he running a stock B16 ecu bouncing off the rev limiter at 6500? That's an assumption I'm willing to bet money onOriginally Posted by NOmotorX
![]()
K series 626. That's right. It's got a K in it.
let bet then how much and how are you going to find out if it wwas working or not and the hell are we debating on someone else motor anyway stop thread jackin ya own threadOriginally Posted by blackshine007
Soon!!
^^Page 4 and 5 was you and Tony whorin' up my shit. There's nothing wrong with being off topic now.
Speaking of which, Kevin must be sleep or work a whole lot..... he haven't responded yet.
K series 626. That's right. It's got a K in it.
if i finish my car tonight ill be there
he prolly busy hooking up his nosOriginally Posted by blackshine007
Soon!!
me tooOriginally Posted by allmotorX
![]()
Originally Posted by allmotorX
![]()
K series 626. That's right. It's got a K in it.
i hope you loose punkOriginally Posted by blackshine007
Soon!!
So it shouldn't rain on Tues. For the people involved come out to the BP on Tues night at 10:30, we'll meet up & then ride out to a location from there. I suppose if there are other people that want to run me, Blackshine, or whomever else then come out too then..
i wanna run to but i dont have a carOriginally Posted by KevinT707
Soon!!
I hope those air force ones are on good and tight because after I run Kevin, I'll give you your race........ by foot. Sucka. Be ready.Originally Posted by allmotorX
K series 626. That's right. It's got a K in it.
hell yea lets do itOriginally Posted by blackshine007
![]()
Soon!!
Has this run not happened yet?
this 2morrow or next tues?
I just finished wrapping my new header 3hrs ago. Tomorrow I need to pick up a pair of gaskets, change the oil and dyno tune it. If weather permits, I'll be out there and maybe get in some runs for fun. I still hadent changed the brake pads since last time, so it will be showering sparks this time, unless I change them tomorrow. Either way, Im looking foward to it
![]()
![]()
![]()
header looks goodOriginally Posted by TheSnail
Soon!!
Originally Posted by allmotorX
Thank you Sir B16
lol i traded the rex a couple of weeks ago for a slow ass 16sec teg then i sold it now im contemplating my next buildOriginally Posted by TheSnail
Soon!!
But you were looking for a 4 door right?
naw just back seats ill have something faster than the b16 hopefullyOriginally Posted by TheSnail
Soon!!
Cool. Family First
I wanna run in with the slow dsmOriginally Posted by KevinT707
..
1999 MITSUBISHI ECLIPSE GSX
WORLDS FASTEST MODIFIED 4 CYLINDER
OWNER: BRENT RAU
4G63 YUP
1400 HP
2200 LBS
11,000 RPM
86 PSI OF BOOST
MAGNUS MOTORSPORTS
THAT IS 350 HP PER CYLINDER
AND YES ITS A MITSUBISHI ECLIPSE
1/4 MILE IN 6.97 SECONDS
BRENT RAU'S MESSAGE TO OTHER DSM'RS:
NEVER GIVE UP
hopefully ill be out there cylinder head is still off...thought i had a valve spring compressor and looked in my tool box and was SOL
GaGen, dont worry about finishing your car by then. I know you got the dedication from what I saw. I beleive such dedication leads somewhere. You came out from the get go about being the slowest, but still showed up. +1.
you evr got beat by a sohc honda motor b4Originally Posted by TheSnail
Soon!!
But now the tables are turning, so Mr. Gen is gonna..
no, but you shocked every one with your b16.Originally Posted by allmotorX
im hoping you still have your car in a few weeks well im pretty sure you will. Can you say bisimotoOriginally Posted by TheSnail
![]()
![]()
Soon!!
Originally Posted by allmotorX
I hoped that we got more runs with your privious rex, but I was too slow to make things happen. I am sure your new ride will be just, if not more cometitive then mine. Within the months, once you get your new ride up to par, I hope to battle it out with you once again.
It will be maybe a month before its up and running my pistons are on back order, i have to drop my head off at the machine shop next week and get my bolt ons then ill be out and aboutOriginally Posted by TheSnail
Soon!!
Sounds good Sir. Im guessing it aint a Frankinstine B16 no more? I know what ever it is, it will be nasty.Originally Posted by allmotorX