My K20a2 EG build up thread - TONS of pics!

[spacelion]

Nice update!

[Fuster_Cluck]

Thanks guys for the props

Session 032:

Jason wiped some filler:



....and I removed some dead weight



More dead weight:



Putting in work:



Removed:



OEM:



Race mode :



Jason (SneezinCD5) burned his leg on some welds he was sanding down



"Tapping" the camber bolts. Earlier in the thread I posted about how one of the bolts would not seat entirely.



I couldn't remember which 1 of 4 was messed up, so I tapped all 4 and now they work beautifully Probably go with automotive bolts (10.9) grade as the replacement.



Primered shock tower:



Removed these 2 clips at the bottom of the windshield:



Pry it off once the screw is removed:



Paint pictures uploaded and will be posted Sunday or Monday

Thanks for looking

[KPowerEP3]

+as many as I can for an excersise in clanliness +1 more for some K-series lovin

[Fuster_Cluck]

+as many as I can for an excersise in clanliness +1 more for some K-series lovin

Thanks for the props

One pic I forgot about and a midori green engine bay:

[GSRteg®]

Looking good like alwase.

[OTG Signs]

Your thread has caused me to keep an eye out for an EG to gut and rebuild.

[atlantamx3]

Brave man to weld in shirtless, with shorts, and between your legs! Ouch! watchout for the splatter!

[Fuster_Cluck]

The outcome is not up to par with SneezinCD5 so the bay will be sanded down and repainted in a paint booth. The dust and overspray was terrible. The initial plan was to paint the entire car in the garage, but not going to happen now. The average Joe would most likely be happy with the garage job, but too much work is going into this to settle for anything less than a clost to perfect paint job.

Enough jabber, here is the work:

Mixing it up:





Laying it down:











Flash used:













Thanks for looking

[OTG Signs]

The outcome is not up to par with SneezinCD5 so the bay will be sanded down and repainted in a paint booth. The dust and overspray was terrible. The initial plan was to paint the entire car in the garage, but not going to happen now. The average Joe would most likely be happy with the garage job, but too much work is going into this to settle for anything less than a clost to perfect paint job.

If the garage door was lowered to the height of a 2' box fan, and you had 2-3 of them, and sealed the gaps between them, there would be a ton less trash in the paint. :/

Great color and great build. Has me wanting to start a full-stripped project.

[Fuster_Cluck]

If the garage door was lowered to the height of a 2' box fan, and you had 2-3 of them, and sealed the gaps between them, there would be a ton less trash in the paint. :/

....and the overspray would of been 10X worst. The trash is not that bad, it's the overspray that killed it. He just painted his hatch earlier in the week using the garage method. Had to open the door because the overspray was so bad that you couldn't even see the other side of the garage. After spraying for about 20 seconds the entire driveway was a big cloud of mist.

[OTG Signs]

....and the overspray would of been 10X worst. The trash is not that bad, it's the overspray that killed it. He just painted his hatch earlier in the week using the garage method. Had to open the door because the overspray was so bad that you couldn't even see the other side of the garage. After spraying for about 20 seconds the entire driveway was a big cloud of mist.

Air filters.

It looks good in pictures regardless.

[NAIZBST]

paint looks good

[puregroove]

paint looks good so far... very nyace::

[WhiteAccord]

Paint looks very good... This build makes the paint look like orgasm......

[Repost Squintz]

wow; like the color alot.

[Whiteboy™]

sexy.

[carbongs]

props to the in house work. looking very nice.

[dkjohnson04]

i like the hatch, clean car, that swap will be sick!!

[Benefit]

http://i121.photobucket.com/albums/o...06_cr_rs23.jpg

whats the prestige

[Sushi]

Amazing. I would love to see this car in person.