WTB DA front spindles or possibly whole brake swap!

[DrunkScotsman]

lmk what you got ,thanx

[DrunkScotsman]

ttt

[SKUNK2GUY]

talk to thechosenone he's parting out my old da it needs rotors but he should still have the cross drilled rotors i gave him you could get front and rear prolly from him

[DrunkScotsman]

thanx!

[bigdare23]

Is your civic a base (4spd)? If not you don't need these unless you want to upgrade.

[GermanMuscle]

you can also get them from a 94+ integra, they are the same as the da

[mccoy1178]

im partin out a 97 integra. i got the front and rear disk brakes if ur interested. $200 for front and rear if u pull, $250 ill pull them. lmk thanx
Mccoy

[DrunkScotsman]

i counted the splines on the hb and axles , not gonna match up

[bigdare23]

i counted the splines on the hb and axles , not gonna match up

double check cuz if you was using a dx or si tranny then it should work.

[DrunkScotsman]

i'll check it out in the mornin!

[DrunkScotsman]

bump

[BTLFED]

DA knuckles will throw off your camber, FYI. And if you are going to do front and a rear disc brake conversion make sure you get the e-brake cables and the Proportioning valve.

[DrunkScotsman]

i just tried to use my axles that came with the swap and they didnt fit in my hubs!

[Pavlo]

Check Pull-a-Part they had 2 DAs with full rear disc swaps, no fronts though.