FS/FT: 1994 Dodge Ram 2500 CUMMINS wrecked

[nate727]

--------------------------------------------------------------------------------

1994

DODGE RAM 2500

Cummins Turbo Diesel

4x4

5 Speed

Regular Cab, SLT Package

Power windows, Power locks, Tilt, Cruise, Air-conditioner

Drivetrain still good, the engine ran when wrecked, and died when the battery cables were broke from the battery during the wreck and shut off the engine. Motor is strong and turbo push's 38psi....3k RPM governor spring kit, blocked off wastegate, 3-to-4inch straight exhaust and #"0" plate approx. 125 horse. Tranny shifts smooth with no grinds and transfer case is good as well. Front and rear axles with 3:55's in both are good as well.

Interior is still in pretty good shape, airbag didn't deploy. Only glass broke is passenger side door glass. Has cloth seat in good shape and rubber floor thats easy to clean. All power options worked on this truck.

TRUCK IS REPAIRABLE
CLEAN VA TITLE




3200 obo......trades considered

[N/A EK]

You need to upload those pic's from photobucket, it's rules NO LINKS please and good luck with the sale.

[silversol]

where are you located?

[nate727]

southwest va.....

[N/A EK]

You need to upload those pic's from photobucket, it's rules NO LINKS please and good luck with the sale.

^^^Or it will be locked.

[nate727]

i posted this ad exactly like i always do....why is this one gettin locked?....i posted one pic of the truck the rest are too big for this site??

[N/A EK]

i posted this ad exactly like i always do....why is this one gettin locked?....i posted one pic of the truck the rest are too big for this site??

Re-size them. You need more than just one pic. It wont be locked right now, post the rest of the pic's until tomorrow and you'll be fine.

[nate727]

which rule am i breakin here?......the link is not a forsale ad somewhere else....its just pics?

[N/A EK]

which rule am i breakin here?......the link is not a forsale ad somewhere else....its just pics?

*HOT LINKING

-No links to other sites or EBAY are allowed
- Use our attachment options Or OUR FREE picture hosting service.
Click here for free picture hosting

Here you go!

[unkn0wndj]

Isnt that price a bit much? Maybe I dont know much but a 94 wrecked truck doesnt seem like its worth 3200..

[nate727]

price is obo......and go a price a 12 valve motor just by itself.....

[RutRoe]

Wow.

No chance this will get sold here. Put it on craigslist.com or ebay.

Good luck

[nate727]

if i can find the slips i'll scan and post them....
truck went 14.2 @101
not bad for 3/4 ton truck that 4x4

[RandomGuy]

now that you mention it, i think i'm bleeding inside my chest

[SE-Rious1]

damn thats fucked up lol but GL with sale

[buddha@TeamFX]

For any diesel guys especially ones into cummins thats not a bad deal at all!...you can't buy the drivetrain for that...I've seen 12valve's with 250,000miles plus go for $8500 and up...GL on the sale you'll hear back from me in the am...waiting on a call from my buddy.

[mikespeed95]

repairable my ass.

unless you meant

"repairable with simply installing a new frame, front suspension, front clip, wiring harness, bed, tail lights, head lights, bumpers"

[mikespeed95]

but if the drivetrain is still good, its a good parts truck..and the price is plenty fair forthat.

but that shit is not repairable unless you consider dropping the motor/tranny into another truck "repairing" the truck you are selling..

[aaronfelipe]

Wow.

No chance this will get sold here. Put it on craigslist.com or ebay.

Good luck

x2

[nate727]

repairable my ass.

unless you meant

"repairable with simply installing a new frame, front suspension, front clip, wiring harness, bed, tail lights, head lights, bumpers"

ok....
1.i didn't say CHEAP FIX.....
2.know what you fuckin talkin about .....12valve...NO WIRING HARNESS
3. only front frame horns are tweaked 3.5inches.....
4. front suspension is fine.....2 control arms and its back to where it needs to be....
5.THANKS FOR THE BUMP JACKASS

[nate727]

if any of you replyin really did bodywork....then you'd see that the body is whats makin the truck look so bad.....COME LOOK FOR YOURSELF....till you do....keep you comments off the thread.....

[mikespeed95]

as someone who has done bodywork, and raced cars, and sees that HUGE FUCKING INCONSISTENT GAP BETWEEN THE CAB AND THE BED AND THE FUCKING ANGLE OF THE FRONT LEFT FENDER IN RELATION TO THE REST OF THE TRUCK LIKE ANYONE ELSE WITH FUCKING 10/10 EYESEIGHT OR BETTER CAN SEE, im pretty sure that frame is bent.

but like you said, its repairable with more parts/labor/work than you can buy a totally undamaged truck for.

[mikespeed95]

ok....
1.i didn't say CHEAP FIX.....
2.know what you fuckin talkin about .....12valve...NO WIRING HARNESS
3. only front frame horns are tweaked 3.5inches.....
4. front suspension is fine.....2 control arms and its back to where it needs to be....
5.THANKS FOR THE BUMP JACKASS

im glad the motor doesnt have a harnes.......uhm wait...i own a cummins what the fuck are you talking about no harness?

but to specify i was speaking of the chassis harness, not that thats an important item or anything, especially since its probably cut all to fuck looking at the damage done to that truck..

like i said, that truck is giong to cost WAY more to fix than what it would be worth to fix it, and there is more stuff to replace on that truck than there is to salvage.

parts truck.
























jackass

[nate727]

well....since your eyesight is better than mine...my ole mans......and the insurance agent...and the garage that done the estimate.....i guess your right....

just keep postin up....the bumps help...

[Sonny BonaHo]

is 38 psi a factory settings or modified? would you consider 1500 bux. i do some bodywork but i dont think i could fix that. im really just wanting the engine etc. lmk

[mikespeed95]

well....since your eyesight is better than mine...my ole mans......and the insurance agent...and the garage that done the estimate.....i guess your right....

just keep postin up....the bumps help...

what was the estimate since you just stated you had one done mr fix it?










in before

[mikespeed95]

is 38 psi a factory settings or modified? would you consider 1500 bux. i do some bodywork but i dont think i could fix that. im really just wanting the engine etc. lmk

that drivetrain alone is worth his asking price.

should be around 20psi stock

[nate727]

yes stock its pushed around 18-22psi......

estimate by turkey pen garage, 5785,
estimate by geico insurance agent was 6122.
thank you
so like i stated before...the truck IS repairable...didn't say it'd be cheap...or the easiest thing to do....but stop raggin on the truck....if interested...come take a look...if not....go elsewhere.

[nate727]

it was a side/front impact....the bed is only messed up from the guard rail, and the tool box that was in the bed flew out and bounced around where it wasn't bolted down really well.....thats what cause all the bed rail damage.

[mikespeed95]

im not ragging on the truck as much as im calling you an idiot for trying to sell it as repairable.

single cab 1st year after redesign cummins arent going for 10k anymore, sorry.

good luck selling your parts truck asswipe. too bad you were probably dumb enough to buy that piece of shit ford in the back of the pics. have fun replacing your turbo and injector control module every month, jackass.

[nate727]

another perfect example of your ignorance....the ford is a gas job...lmfao
and i never said the truck sold for 10k....but price a 12valve 5spd 4x4 3/4

[mikespeed95]

guess you failed at math, which would explain the trailer you live in in the background of your pics.

3500 + 6k in repairs + shit they didnt see + towing = 10k.

by stating its repairable, then arguing about how it should be repaird, you are stating there is reason to beleive that truck is worth repairing, which would make it worth 10k, which is way more than 94 single cab cummins are going for.

congrats on being fucking moronic enough to buy a peice of shit gas powered dually. hows the land of 12mpg and not being able to tow up a steep hill at 1/2 the speed my cummins is at while passing you and your transmission thats starting to give out treating you?

again, good luck with your parts truck. if you had 1/2 a mind youd take that truck motor you have in that parts truck and put it in that gutless peice of shit ford you gotand have a truck capable of pulling something again.

[nate727]

lol...your funny as shit man....the ford is the feed truck....the trailor is where our farm help lives...if you are buyin the truck to fix and sell...its probably not worth the money....but i dont' give 2 shits about UR CUMMINS....i've had 4....the one you can't seem to get over is number 5....so bring your cummins on....we'll see which one runs better.....cuz...i'd say the pullin truck we have prob might just have to come out and play....when you get the big boy toys.....come see me

[Sonny BonaHo]

lol

[Sonny BonaHo]

so is that a no on the offer eh?

[Sonny BonaHo]

hillbilly racin oh shit grab sum beer

[nate727]

sorry man i can't go as low as 1500....thanks

[Sonny BonaHo]

lol this mikespeed character is sumthin else. night bump. peace

[buddha@TeamFX]

oh if they are beaners thats fine.
nobody likes them anyways. i think they are more hated than muslims.

good luck with selling your parts truck.

Let me guess...Your cummins is a 24 valve...?...12 valve is prolly one of the simplest diesels they are...I know its alot easier than my 7.3 to work on...

[nate727]

they are easy to work on...and you can do so many things to them to get free power....by sliding a plate and turnin some screws you can have a range of horsepower....from stock to 125+ horsepower...280+ ft lbs.....without buyin a single thing.