FS: 1988 HF CRX RARE****SOLD****

**Vteckidd** · 07-07-2006, 06:46 PM

My new project has outgrown my CRX. Need to get this badboy gone to move onto the new chassis. I swore i was never going to sell it, but times have changed.

1988 CRX HF
1819LBS from the factory
Walbro 255LBH fuel pump
Neuspeed Springs/KYBGR2s
FULL RACE TRACTION BARS

This is the RAREST an LIGHTEST of the EFs. This car ran CONSISTENT 13.3s with a STOCK gsr motor when johnzm owned it. I bought it off him an it used to house my 2.0l LSVTEC motor. Make no mistake, this is a RACE car, no heat, no ac, no firewall matting, no glove box, no radio, no vents, nothing. Its got a dash an a clutster. no door panels. Its completely gutted.

Car is fresh flatblack rattle canned by me. Engine bay is black. interior is flat black.

$700
FULL RACE TRACTION BARS INCLUDED

PICS:

Comes with the wheels you see on it.

NO TRADES, Dont bother bitching about the price, it WILL SELL ON HT as these SHELLS completely stripped with no glass are going for $900 to guys in new york.

**iloveboost** · 07-07-2006, 07:53 PM

Have you weighed it after gutting it out?

**Vteckidd** · 07-07-2006, 08:16 PM

nope, but im sure its less than 1800

**tractionless** · 07-07-2006, 08:53 PM

and what makes it so rare?

**2.0civic** · 07-07-2006, 08:55 PM

cause its a hf...i would wish you luck mike but i got a feeling this will be gone soon anyway...free bump

**Formally...** · 07-07-2006, 09:16 PM

Originally Posted by iloveboost

Have you weighed it after gutting it out?

Put it this way. If we need to move it we just get one guy on each side and pic it up. Two guys can pick up the rear even with a motor in it. Great all motor chassis.

**JITB** · 07-07-2006, 09:36 PM

would look good with a mazda motor in it

**Marta Mike** · 07-07-2006, 09:42 PM

Originally Posted by Main Stream

Put it this way. If we need to move it we just get one guy on each side and pic it up. Two guys can pick up the rear even with a motor in it. Great all motor chassis.

me and my friend did that to my car easily.......hmmmm i need to get it weighed.

Anyways.........free bump

**Vteckidd** · 07-08-2006, 09:21 AM

thanks

Brian* · 07-08-2006, 11:11 AM

ill give you my lawn mower for it... i just bought an 90- si for $600 in the same cond. and has motor and tranny (runs)... but yours would make a good project for less than 500$...

**Vteckidd** · 07-08-2006, 12:54 PM

Originally Posted by 95S14

ill give you my lawn mower for it... i just bought an 90- si for $600 in the same cond. and has motor and tranny (runs)... but yours would make a good project for less than 500$...

good for you, my 88 HF shell is worth more than your running SI, thanks , and have a nice day.

i have $400 TRACTION bars alone

Brian* · 07-08-2006, 12:57 PM

cool, traction bars with no motor...

Brian* · 07-08-2006, 12:58 PM

was not tryin to bash, I was just statin a fact

**Vteckidd** · 07-08-2006, 01:13 PM

keep your opinions to yourself.

The traction bars were for when i had a 2.0LSVTEC that made 240whp ALL MOTOR, move along noob

Brian* · 07-08-2006, 02:09 PM

lol...

**2.0civic** · 07-08-2006, 02:23 PM

Originally Posted by 95S14

ill give you my lawn mower for it... i just bought an 90- si for $600 in the same cond. and has motor and tranny (runs)... but yours would make a good project for less than 500$...

i hate when people do that shit and come and bash threads with what they paid. come on now, unless you want the car, dont say shit like that

**Jblizzard** · 07-08-2006, 02:28 PM

are we guys in new york?

**SLow_POke** · 07-08-2006, 02:53 PM

LOL

bump amigo ,

BTW did the other rex sell?

-Ernie

**Vteckidd** · 07-08-2006, 02:54 PM

Originally Posted by BlizzCivic

are we guys in new york?

no we arent, but im not selling it as much as those guys are.

People are selling them to guys in the NORTH without rust for $900 with no modes, completely gutted.

mine has $400 traction bars, fuel pump, springs, struts, etc

**-S Double C-** · 07-08-2006, 05:00 PM

damn i wished i could afford this...free bump

**Vteckidd** · 07-08-2006, 05:33 PM

i am negotiable, i didnty say $1000 FIRM. but i know how lowballers are

**Louie_EM1** · 07-08-2006, 05:44 PM

Hey man, ltns.
I come on these boards every so often to see what's new in the classified department.
Still have the Si too heh.

Just wanted to say, people have a hard time computing costs of a spanking shell for some reason; the worth gets hidden within the shell and people need to realize that even without a motor the chasis alone is far more important. Do you know how many people sell cars because there's something wrong with the engine, sometimes they don't tell customers because it's minor or unnoticable. This shell has a lot of potential even with a b16 it can be one fun car to track. Cheap paint, healthy motor of your chioce... think for the future and don't get caught up on trying to lowball a hundred bucks.

Good luck man.

**Vteckidd** · 07-08-2006, 05:47 PM

whats up BRO! been awhile, damn you still got that shell? i cant beleive that shit, that chassis is GOLDEN.

if i had the money id buy it man, wanna trade? lol i got a 95 civic auto with PS an AC an this gem of a crx haha.

you still looking for a stock motor? PM me if you need one, im doing a motor swap on a 2000 SI right now

**integra8705** · 07-08-2006, 11:26 PM

ya that is actually a good deal. if i could sell my coupe i would be all over this

**Vteckidd** · 07-09-2006, 10:27 AM

up

**Vteckidd** · 07-10-2006, 06:25 PM

up, OBO

**EmminoDaGreat** · 07-10-2006, 09:24 PM

bump, oh and when you comin to get that red one done?

**Vteckidd** · 07-10-2006, 09:55 PM

tomrrow, up

**Vteckidd** · 07-11-2006, 01:47 PM

$800 come get it

**Vteckidd** · 07-12-2006, 03:33 PM

up

**Vteckidd** · 07-12-2006, 11:14 PM

bump

**Vteckidd** · 07-12-2006, 11:15 PM

run 13.3 with a STOCK GSR swap, already been done in this chassis

**bigasian** · 07-13-2006, 02:44 AM

13.3 with a bone stock gsr? no bolts ons or anything???

**Vteckidd** · 07-13-2006, 10:12 AM

156whp GSR , it had a DC JDM header

**Vteckidd** · 07-13-2006, 11:14 AM

up

**Vteckidd** · 07-13-2006, 11:23 AM

60 1.812
330 5.473
1/8 8.495
mph 81

qtr 13.339
mph 101.6

**Vteckidd** · 07-13-2006, 06:03 PM

up

**bigasian** · 07-14-2006, 01:38 AM

i could have swore that car had skunk2 pro 1 cams and a ys1 trany with an itr gear set with a 4.7 final drive

**KevinT707** · 07-14-2006, 01:40 AM

Originally Posted by Mr. Vteckidd

156whp GSR , it had a DC JDM header

HUH, really ? Thats not what I remember. I remember John told me differently, like it had a fully built head & blah blah blah ..

So did he never run the B16 w/ built head then ?

**IndianStig** · 07-14-2006, 02:57 AM

i love the seat cover. bump for that man.

Thread: FS: 1988 HF CRX RARESOLD

Thread Tools

Display