Results 1 to 24 of 24

Thread: FS: 90 Prelude SI 4WS

  1. #1
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default FS: 90 Prelude SI 4WS

    Engine/Performance:

    83.4mm JDM B20A (Iron Sleeved) SOLD
    83.5mm Arias 10:1 Forged Pistons SOLD
    Pauter Forged Rods SOLD
    Polished/Balanced Crankshaft SOLD
    Unorthodox Crank Pulley SOLD
    Milled/Ported/Polished Head w/ 3 angle valvejob & oversized valves SOLD
    ARP Head Bolts SOLD
    Gladman 3" CAI
    OBX Hi/Flow Cat. Conv.
    NGK Spark Plugs & Wires
    Uberdata P75

    Suspension:
    Tokico Blues
    Neuspeed Sport Springs (Yellow)
    Ludespeed Camber Kit
    SpeedBleeders
    Axxis MetalMaster Brake Pads
    Powerstop Crossdrilled/Slotted Rotors
    Gladman Front/Rear Strut Bars
    14" HX Rims (Needs 2 New Tires)
    15" Steelies w/195/65/15 Kumho 711's w/75% Tread

    Exterior:
    1.5 yr old Gunmetal Paint (Painted by Sprayglo of Duluth)
    VIS OEM CF Hood
    Original Hood also painted Gunmetal (Painted Underneath Also)
    MX6 Front Lip
    Painted Brake Calipers Black
    H4 Headlight Conversion
    Foglights Rewired for auxillary use
    35% Tint

    Interior:
    NRG Racing Seats w/Blue 4pt Harnesses
    Isotta Steering Wheel
    3rd Generation Gladman Short Shifter (Shortest shift of all of his shifters also shorter throw than Ko-SI's - I owned all of them)
    OEM Blue Billet Shift Knob
    Generic Blue Billet Pedals
    Juju Racing Shift/E-brake boots
    Reverse Indiglo guages
    Broadway 270mm Rearview
    GTech Pro Perf Meter
    Battery Relocated to the Trunk

    ICE:
    Kenwood 3D Mask Headunit w/Sirius Radio
    Kenwood Component System (2 Tweeters & 2 Mids)
    Pair MB Quartz Tweeters
    Blaupunkt 5 1/4" Door & Rear
    12" Memphis Sub in Sealed Box
    200W Memphis Amp

    Extras:
    Paeco 100% Copper Head Gasket .060mm
    2.25" Test Pipe

    As is:
    Roughly 228,000 miles on the body. Currently a stock JDM B20A engine is installed with approximately 85,000 miles on it (New Timing Belt was installed approximately 500 miles ago). The only engine performance parts currently installed are a 7.5lb Fidanza Flywheel, ACT HDSS Clutch, Short Ram Intake (Fender well/wall needs to be drilled to install the extention for a true CAI), and a Apex-I S-AFC. The S-AFC may be sold separately because there's no use for it with the current setup. I only use Mobile 1 Synthetic 5W30 oil. Within the past year I have sold a majority of the N/A and FI power adders that are no longer posted above. They include: DC Header, Web Racing Cams, Thermal R & D Exhaust, 60mm TB, Ported IM by TooFast, Skunk2 ADJ. Cam Gears, T3/T4 Turbo Manifold w/downpipe by Ludespeed, Turbokit, MSD ignition setup, ZEX Nitrous Kit and etc. I had to give up tuning due to financial issues and my 2004 inspired love of sportbikes. Tried to sell the car in a complete package prior to parting out the abundance of add-ons, but all considerable buyers were too far away to see the value in the car.

    Extras:
    To complete the 83.4mm Bore JDM B20A engine: Minor honing for cylinder walls to install the 83.5mm new pistons, add new bearings and I would recommend some aggressive cams to top it off for an aggressive NA beast or you could boost it. I have many spare parts lying around which are free if you take the car (Brand new H4 superwhite bulbs w/lifetime warranty, damn can't think of anything else but anything you want lude related, car related whatever as long as it's not my tools.) Got 2 extra HX wheels, steelies, tires.........it goes on and on.

    Pet Peeves:
    There is a CEL for the EGR since I have the full JDM setup including the JDM IM. The engine bay and trunk interior remain the original red paint. The only body damage that is along the runner underneath the passenger side door (caused by falling off of a jack at the same B.S. shop that allowed my turbolude to be raped of all the turbo components not specifically built for the lude). I had to make them do some pro bono work since they didn't have proper insurance to cover my financial losses. The AC doesn't work, I think bad compressor. It will start cooling then a lil red light within the AC control button and the compressor turns off. I had the system recharged and verified to have no leaks however the problem continued.

    Asking Price for all of the above: $2,750

    Sold As Is, no extras that are not currently installed: $1,700 - The only negotiations are interior components such as the NRG Seats, Isotta Steering Wheel, Gladman Short Shifter, and ICE. Which I wouldn't recommend doing since I didn't consider these items when I calculated my asking price. I will consider all decent offers as this car needs to be sold A.S.A.P. so tell your family, friends, neighbors, co-workers, whomever.

    I WILL NOT PART THE CAR OUT: THE ONLY EXCEPTIONS ARE THE ITEMS NOT CURRENTLY INSTALLED - I.E. 83.4MM BLOCK, PERFORMANCE HEAD, PAUTER RODS, ARIAS PISTONS, ETC.

    Closing Statements:
    I have included what I think is a complete statement of the cars condition as well as extras, however there may be more included than listed (nothing less). In addition to posting questions as replies, please also pm me or email me for faster responses. [email protected]

    Clean Title in hand and in my name ready to be signed over to a new owner. Technically I am the second owner of the car; originally owned by a couple who had signed the car over from the husband to the wife and then my mom purchased it for me whom in turn signed it over to me when I got out of college. Phew, get it

    Forgot to mention, I will deliver the car within reason say 350 miles for gas both ways plus expenses.
    Attached Thumbnails Attached Thumbnails -cf-hood-jpg   -df-jpg   -dl-jpg   -dlo-jpg   -do-jpg  

    Last edited by con; 05-17-2006 at 04:56 PM. Reason: As Is: $1,700 Needs to sell A.S.A.P.

  2. #2
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    More pics:
    Attached Thumbnails Attached Thumbnails -rf-jpg   -rfo-jpg   -right-jpg   -rr-jpg   -seats-jpg  


  3. #3
    IA Original Slinger DC2NR's Avatar
    Join Date
    Jul 2005
    Location
    Out in the Boonies
    Age
    38
    Posts
    4,361
    Rep Power
    26

    Default

    Love the wheels .. if you decide to part them from the car lmk
    VTECH ... Making phones since 1994.

    Looking for Integra Sedan (DB7/8) parts <--clickable

    Q:Nitrous on stock LS high mileage. Too risky?
    A:IMO nos is like steroids and giving steroids to a grandma doesnt sound all that good to me!

  4. #4

    Default

    Car looks fucking mint.


  5. #5
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    even more pics:
    Attached Thumbnails Attached Thumbnails -seats2-jpg   -sw-jpg   -sw1-jpg   -extrhead-jpg   -extrhead2-jpg  


  6. #6
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    last few pics:
    Attached Thumbnails Attached Thumbnails -pauter-rods-jpg   -paeco-head-gasket-jpg  

  7. #7
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    Bump.........................Needs to sell A.S.A.P. $1,700 As Is

  8. #8
    ☠gOOn☠ Brian*'s Avatar
    Join Date
    Nov 2005
    Location
    ☠Young Harris☠
    Age
    40
    Posts
    6,809
    Rep Power
    30

    Default

    thats a fucking deal!!!!

  9. #9
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    bumpage from page 3.............

  10. #10
    Emergency Medical Tech
    Join Date
    Oct 2003
    Location
    Duluth,Ga
    Age
    35
    Posts
    1,506
    Rep Power
    24

    Default

    Bump for con!!


    You don't know how STRONG you are until being strong is the only
    CHOICE you have!

    'Born Ready!',LJ

  11. #11
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    Quote Originally Posted by ruah_23
    Bump for con!!
    many thanks. I know it's been a while but what happened to the project, don't quote me but was it not something with a H22?

    oh yea, ttt............

  12. #12
    Certified Gearhead
    Join Date
    May 2006
    Location
    Dalton, Ga
    Age
    38
    Posts
    308
    Rep Power
    20

    Default

    pm sent (BUMP)
    turbo lagg = the few seconds where the other guy thinks he is winning!

  13. #13
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    Quote Originally Posted by tractionless
    pm sent (BUMP)
    replied............

  14. #14
    Just add water OaTmeaL's Avatar
    Join Date
    Nov 2005
    Age
    43
    Posts
    1,288
    Rep Power
    22

    Default

    Nice 3rd gen... BUMP for another Luder

    What is up with the pass. door on the bottom?

    OF*C
    OEMFitment Crew Memeber 02

    Future: OEM fogs, Koni/GC setup, and Volk RE30 wheels.

  15. #15
    Certified Gearhead
    Join Date
    Apr 2006
    Location
    Lithia Springs
    Age
    36
    Posts
    186
    Rep Power
    20

    Default

    clean car good luck on the sale

  16. #16
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    Happy Mother's Day...............ttt

  17. #17
    he driveth furiously Jehu's Avatar
    Join Date
    Dec 2002
    Location
    North Atlanta area
    Age
    53
    Posts
    1,206
    Rep Power
    24

    Default

    Bump for a good friend. 1700 is definately a steal!
    Formerly Daily Interlude


  18. #18
    IA Member
    Join Date
    Apr 2006
    Location
    mcdonough, ga
    Age
    38
    Posts
    45
    Rep Power
    0

    Default

    where are you located?

  19. #19
    he driveth furiously Jehu's Avatar
    Join Date
    Dec 2002
    Location
    North Atlanta area
    Age
    53
    Posts
    1,206
    Rep Power
    24

    Default

    He's in Stockbridge, GA...
    Formerly Daily Interlude


  20. #20
    G.O.M.A.B
    Join Date
    Mar 2006
    Location
    Decatur, GA
    Age
    45
    Posts
    458
    Rep Power
    20

    Default

    pmed


  21. #21
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    Altima 404: replied

    Jason, thanks for the assist.......

  22. #22
    YOUR MOM GOES TO COLLEGE Curbow_USMC's Avatar
    Join Date
    Jul 2005
    Location
    Augusta
    Age
    39
    Posts
    856
    Rep Power
    21

    Default

    pix of the motor?

    my 700th post
    \/\/ Click pic for more pix of my ride
    [

  23. #23
    Tanoshi kata ze!
    Join Date
    Nov 2005
    Location
    Gwinnett
    Age
    47
    Posts
    231
    Rep Power
    20

    Default

    Damn con why...? ah well... :-( ::

  24. #24
    ......................... con's Avatar
    Join Date
    Dec 2002
    Location
    75 South......
    Posts
    2,424
    Rep Power
    25

    Default

    The 83.4mm overbore engine along with the performance head, pauter rods, arias pistons, and ARP rod bolts has been sold..............

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!