91 si t/w or f/t built b serries motor

**hondachick22** · 03-25-2006, 02:14 PM

i have a 91 si hatch for sale or for trade iv had the car over a year and just recently built a b serries for it the car runs fine , it needs to be tuned , and i havent got the money to do it yet . the car has 183,xxx miles on body and 1,300 on motor and i built the motor at auto motive persion in forrest park.

good .
the motor only has 1,300 miles on it runs perrfect ,pulls hard even with out being tuned.
has 15inch c8,s
sci inigition box
momo champion steering wheel
rear disc brakes b,m short shifter
piviot led shift light 3 stage
cat back with dc sport quiet exthaust

motor.
ls tranny
9 pound cc flywheel
6 pluck cc clutch
b,m fule regulator
ice man cold air intake
hasport mounts with upgraded in serts
num 1 nopi header

2000 gsr block ,99 type r head and i bought it from import xperts
the block has been lined honed and bored .20 over
has 11.1 srp pistions, file fit rings
the rods was polised to a mirrow finshes
arp 9mm rod bolts
cametic up graded head gasket

the head
99 typer head
comp cams stage 2
skunk 2 titamium retainers\ 3 angle valve job
combustion chamber was polsied and the ex ports were open up and allso polished,
intake ports were ploshied and manifold was port match.
zex valve springs
ctr crank pully

this motor has also been blanced

the bad .
has cracked windsheld
some 1 broke my driver head light
driver seat has rip
i was also side swiped 7 months but the rear pannel has been repaired still needs alittle work, passenger door has dent and pass fender has dent.

im asking 4,400 or trade for a eg with swap, or post what you have and the body dose not have to be perfect but needs to run good, my car has alot of work done to it and hsas a lot of machine work done to , just in parts and labor i hav around 3,800$ and befor the motor was built , i bought it from import xperts

the block vin num from the bottom of the block is ...jh4db8599ys000238 ,
car vin available upon request

the car is not perfect but has a lot of work done to it. thanks and jackdaripper has seen the motor while it was being built and has rode in it ,im sure he will voch that it is a good runnig car.

**DurtySpeed** · 03-25-2006, 02:19 PM

I saw this car in person when we picked up the other hatch. It doesn't look all that bad and seemed like it ran very well. Bump for you.

**Jdm94Coupe** · 03-25-2006, 02:27 PM

i remember i was gonna buy dat motor.... how did it end up running? strong? btw i need a LS tranny for my boost project.... does it grind???

**hondachick22** · 03-25-2006, 02:31 PM

i took the motor to work and pulled it a part and it was good , but i also had a little cash at the time and ended up building it , it had type r pistions and the bearings was good , so they were truthfull about the motor

**topsecret2JZ** · 03-25-2006, 02:57 PM

ill trade you for my truck?

**Jdm94Coupe** · 03-25-2006, 03:16 PM

hows that tranny? what year is it?

**hondachick22** · 03-25-2006, 08:06 PM

i did not buy the tranny with the motor.

**Z33_kid** · 03-25-2006, 08:20 PM

bumpty good luck on the sale

**speedyG** · 03-25-2006, 11:17 PM

trade for a 1997 LS? pretty much stock, 180k miles pulls really strong i keep up with the maintnence, etc. etc.

**MrEG62U** · 03-26-2006, 11:27 AM

grinded off vin???

**hondachick22** · 03-26-2006, 11:33 AM

i will get the vin off the bottom of the block.

**slowtegra** · 03-26-2006, 11:46 AM

How much?

**lsvteceg954** · 03-26-2006, 11:55 AM

nice car wish i had the money for it put it on a b16 tranny and tune it and it will b real serious .......bump for nice car

**hondachick22** · 03-26-2006, 12:01 PM

with a b16 tranny and it tuned , so do low 13,s on tires. ill take 4,400 or trade , i really want a eg with a swap ,ls or what ever.

**hondachick22** · 03-26-2006, 06:32 PM

bump

**hondachick22** · 03-27-2006, 08:21 AM

i knoe some 1 wants to trade

**RHD-EG6** · 03-27-2006, 08:37 AM

It will do 13 s on just the motor no nitrous or turbo wow.That must be a really strong b16a . bump for you .

**Jdm94Coupe** · 03-27-2006, 08:39 AM

i kno u didnt get the tranny w/ it.... i was gonna trade ur ls tranny plus a lil cash for a itr tranny, but i got a ls already now, thanks....... good luck with getting what you want 4 ur car, or gettin ur EG.....

bump

**hondachick22** · 03-27-2006, 08:39 AM

its a built gsr block and built type r head , not a b16.

**RHD-EG6** · 03-27-2006, 08:44 AM

thats still really good. Good luck with your sale.

**BABY J** · 03-27-2006, 10:22 AM

I wanted to run u b4 u sold it.

Oh well. Good luck w/ it.

**2.0civic** · 03-27-2006, 10:27 AM

DAMN!! how many hatches do you have??

**hondachick22** · 03-27-2006, 01:05 PM

i had two. but only the one now.

**Vteckidd** · 03-27-2006, 02:03 PM

If the Vin Number was ground off then this makes this block suspect to theft. Sorry man, should have known that when you bought it.

$4400 is steep for a EF with quarter Panel an unibody damage, but good luck

**hondachick22** · 03-27-2006, 02:06 PM

the motor is not stollen and i will get the vin off the bottom of the block

**hondachick22** · 03-27-2006, 02:07 PM

bump

**Vteckidd** · 03-27-2006, 02:10 PM

Originally Posted by hondachick22

and 5,000 or what ever it was you wanted for your motor alone was steep

listen NOOB

If you want to compare your 160whp motor to my 240whp, go for it, i can post all my receipts. thats a battle you will lose

I sold my 1991 CRX DX in PERFECT shape with black interior with a OEM built GSR making 187whp for $3500.

Yours has 1/4 panel damage, the reduces the price substancially. i was just letting you know. Who repaired it, who welded it, is the unibody straight, do you have proof?

dont argue with me, you wont win

**hondachick22** · 03-27-2006, 02:11 PM

the last 3 numbers was grinded off when some 1 grinded the block code off

**Vteckidd** · 03-27-2006, 02:11 PM

so is the BLOCK CODE ground off, or is the VIN ground off, that is 2 different things

**hondachick22** · 03-27-2006, 02:12 PM

lets just run and may the best one win

**hondachick22** · 03-27-2006, 02:13 PM

when the block code was grinded , also the last 3 of the vin came off to .

**hondachick22** · 03-27-2006, 08:37 PM

come on people lets trade

**Scrappy** · 03-28-2006, 12:39 AM

vin and block code both are grinded off? get the fuck out of here... was interested till i read that crap. and i dont wish you luck on your selling either cause you kept saying " Ill go get the code" and never did and then BAM its also gone... what a coincidence...

**hondachick22** · 03-28-2006, 02:02 PM

i got the block vin if your interrested

**hondachick22** · 03-28-2006, 02:24 PM

here is the vin num off the block below the header...jh4db8599ys000238

**insane1320racing** · 03-28-2006, 04:51 PM

99 type r head? there's no 99 type r. unless it's from japan.

**Scrappy** · 03-28-2006, 04:57 PM

Originally Posted by hondachick22

i got the block vin if your interrested

Quit PMing me about this car please, you say you dont care if i am not interested anymore... than dont tell me to ask other people about it to know if its a "good" car... cause sooo many things are odd about it... forgive me to be interested till i read the rest.

**IntegraXTR** · 03-28-2006, 05:35 PM

Originally Posted by insane1320racing

99 type r head? there's no 99 type r. unless it's from japan.

I agree, there wasn't a ITR in '99

**hondachick22** · 03-28-2006, 06:41 PM

the head is jdm. the block is usdm.

**sirhatch1030** · 03-29-2006, 12:38 PM

BUMP

Thread: 91 si t/w or f/t built b serries motor

Thread Tools

Display

91 si hatch( new pics look) built gsr. fs/tr

trade

Posting Permissions

About us

Announcement