Results 1 to 18 of 18

Thread: 1990 300zx twinturbo project car...

Hybrid View

  1. 07-14-2005, 03:05 PM #1
    run4cover
    run4cover is offline
    Certified Gearhead run4cover's Avatar
    Join Date
    Jun 2005
    Location
    Marietta
    Age
    52
    Posts
    364
    Rep Power
    21

    Default 1990 300zx twinturbo project car...

    This car needs an engine harness, to be complete (and run)....It has a low mileage JDM motor freshly swapped in (engine has never ben run since in the car...aprrox. 2 weeks now). The reason I'm selling it is; I'm tired of dumping money into this car, it's perfect for some one that wants a semi-project car with all the upgrades done to it.....for a steal. Here is the mod list, do some research and see how much I have thrown away in this car:

    JDM engine (25,000 km)
    JWT dual pop and ecu
    740cc NISMO injectors
    Fidanza flyweel (brand new fricition material)
    ACT 6-puck clutch (brand new pressure plate)
    SSQV blow off valves (HKS knockoffs...mounted in the stock recirc spots)
    Greg dupree split down pipes
    T28/25 turbos
    ported stock exhaust manifolds (ported by me....~10hours labor per manifold)
    stillen 1/4 pipes
    custom 3" cat back with magnaflow mufflers (no cats, or resonators)
    Z1 motorsports 1 piece aluminum driveshaft
    Apexi avc-r
    ASP underdrive crank pully
    chrome hard pipes
    greddy intercoolers

    On my old engine (low compression in two cylinders), this combination netted 386rwhp @ 1.0 bar, and 426rwhp @ 1.25 bar with a slipping clutch. With a clutch that holds, the car will make between 430 and 450rwhp at 18psi on pump gas. Everything listed is either brand new, or has ~1100 miles on it. I have all receipts of work performed on the car that I didn't do myself. I also have for sale, either with or without the car, the following:

    topspeed 2 1/2" stainless exhaust with titanium mufflers (brand new)

    NOS wet nitrous kit (300zx specific....brand new)

    MSD window switch (brand new)

    Everything listed above dyno figures is included with the car.....everything in the pictures are included EXCEPT the rims and tires....they are not for sale! I do have some cheesy chrome 16 in. rims, but they need new tires, because the ones on it, eventhough good, have flat spots from sitting in one place for 2 years.

    Now....for the price......I'm taking the most REASONABLE best offer...I have the title and pen in my hand. Direct any questions to Alonzo @ 770-316-5571 to arrange a look at the car, or ask any questions and get more details. Thanks for reading.







    Reply With Quote Reply With Quote
  2. 07-14-2005, 03:06 PM #2
    run4cover
    run4cover is offline
    Certified Gearhead run4cover's Avatar
    Join Date
    Jun 2005
    Location
    Marietta
    Age
    52
    Posts
    364
    Rep Power
    21

    Default

    Oh yeah, to clearify...the car does not run...will turn over a burble for about 3 seconds, bt won't run. There is no spark getting to #2 cylinder....but that shouldn't stop it from running.
    Reply With Quote Reply With Quote
  3. 07-14-2005, 04:11 PM #3
    chnco
    chnco is offline
    I Have a Cool Car chnco's Avatar
    Join Date
    Jan 2003
    Location
    Marietta, GA
    Age
    42
    Posts
    2,047
    Rep Power
    25

    Default

    so it needs a harness, how does it even crank?
    Summit Shiloh Crew
    Allen C.
    [email protected]

    S13's are the FUTURE.
    Reply With Quote Reply With Quote
  4. 07-14-2005, 05:13 PM #4
    civic95
    civic95 is offline
    RIP John + Leisa :( civic95's Avatar
    Join Date
    Nov 2002
    Location
    a track near you..
    Age
    46
    Posts
    3,582
    Rep Power
    28

    Default

    Quote Originally Posted by chnco
    so it needs a harness, how does it even crank?
    werd! sweet look Z though (minus the spoiler)
    Reply With Quote Reply With Quote
  5. 07-14-2005, 05:08 PM #5
    shizzy0786
    shizzy0786 is offline
    PARAWHORE! shizzy0786's Avatar
    Join Date
    Jun 2005
    Location
    ATL
    Age
    39
    Posts
    551
    Rep Power
    21

    Default

    how much
    Reply With Quote Reply With Quote
  6. 07-14-2005, 08:10 PM #6
    DRFTR
    DRFTR is offline
    2004 Gallardo DRFTR's Avatar
    Join Date
    May 2005
    Location
    Atlanta
    Age
    44
    Posts
    729
    Rep Power
    21

    Default

    lets start the bidding at 1k dollars
    Reply With Quote Reply With Quote
  7. 07-14-2005, 09:10 PM #7
    BlackDubs
    BlackDubs is offline
    All Motor BlackDubs's Avatar
    Join Date
    Nov 2002
    Location
    Atlanta,GA
    Posts
    2,427
    Rep Power
    26

    Default

    Thats a nice Z.
    Reply With Quote Reply With Quote
  8. 07-14-2005, 09:15 PM #8
    DRFTR
    DRFTR is offline
    2004 Gallardo DRFTR's Avatar
    Join Date
    May 2005
    Location
    Atlanta
    Age
    44
    Posts
    729
    Rep Power
    21

    Default

    no doubt..a very nice z...so is anyone else goin to offer on the car...so what is a reasonable offer for a 1990 300z that doesn't run anyways?
    Reply With Quote Reply With Quote
  9. 07-15-2005, 12:40 AM #9
    shizzy0786
    shizzy0786 is offline
    PARAWHORE! shizzy0786's Avatar
    Join Date
    Jun 2005
    Location
    ATL
    Age
    39
    Posts
    551
    Rep Power
    21

    Default

    i woudlnt pay that much
    prolly 1500 max not tryign to low ball just saying
    but i lookign for an auto so i cant buy it
    Reply With Quote Reply With Quote
  10. 07-15-2005, 12:42 AM #10
    shizzy0786
    shizzy0786 is offline
    PARAWHORE! shizzy0786's Avatar
    Join Date
    Jun 2005
    Location
    ATL
    Age
    39
    Posts
    551
    Rep Power
    21

    Default

    how much woudl u sell the rims and the body kit with the spoiler for?
    Reply With Quote Reply With Quote
  11. 07-15-2005, 01:33 AM #11
    TallGuy
    TallGuy is offline
    Stan The Man TallGuy's Avatar
    Join Date
    Jun 2005
    Location
    Dacula Ga.
    Age
    41
    Posts
    1,330
    Rep Power
    22

    Default

    so whats the best offer?
    Reply With Quote Reply With Quote
  12. 07-15-2005, 09:03 AM #12
    A.P. Photography
    A.P. Photography is offline
    A.K.A. GA Teg
    Join Date
    Jun 2001
    Location
    Behind the lens
    Posts
    14,656
    Rep Power
    43

    Default

    So you are quoting hp numbers on your old engine and not this one. You have no idea how much this one will make (as in documented) correct? These are all just guesses.


    Also the body looks pretty good but would sell better if you left the rims on it. They actually make the car, either that or put the chrome wheels on and then take pics of it.
    "A good photograph is knowing where to stand."
    www.ATLphoto.net Myspace
    Reply With Quote Reply With Quote
  13. 07-15-2005, 10:52 AM #13
    D Dysinger Racing
    D Dysinger Racing is offline
    HOLLA
    Join Date
    Mar 2005
    Location
    ATL-HOE
    Age
    44
    Posts
    37
    Rep Power
    0

    Default

    yeah so whats the highest or most reasonable offer? the rims do make the car btw...
    Reply With Quote Reply With Quote
  14. 07-16-2005, 12:10 PM #14
    crxsiguy
    crxsiguy is offline
    Billy0cean crxsiguy's Avatar
    Join Date
    Dec 2002
    Location
    PimpsVille, GA
    Age
    43
    Posts
    2,579
    Rep Power
    27

    Default

    interested in any trades??
    Toxxxic's job interview
    toxxxic (3:23:28 PM): "Describe yourself in three words" ..... down to fVck"


    New Project coming soon!
    Reply With Quote Reply With Quote
  15. 07-16-2005, 06:20 PM #15
    BufordŽ
    BufordŽ is offline
    A day late, a buck short BufordŽ's Avatar
    Join Date
    Apr 2003
    Location
    Starin' at the world through my rear-view.
    Age
    41
    Posts
    7,997
    Rep Power
    31

    Default

    How many miles on the car, and do you have the stock TT wheels?
    My 2001 Acura 3.2CL Type-S


    Val for president!
    Yes, I would have voted for her.
    In loving memory of Valerie Antranikian.
    Reply With Quote Reply With Quote
  16. 07-22-2005, 09:05 AM #16
    run4cover
    run4cover is offline
    Certified Gearhead run4cover's Avatar
    Join Date
    Jun 2005
    Location
    Marietta
    Age
    52
    Posts
    364
    Rep Power
    21

    Default

    sorry, haven't been checking here.....ok...to answer a few questions....
    1) the car needs a harness because i traced #2 not getting spark to the harness...that's what I do.

    2) why wouldn't it turn over...I didn't say the whole harness is bad, but you would have to pull the engine to get to the harness....if your taking it out, why not just put a new harness in.

    3) as for guessing HP figures...not!!! I have dynos of this same set-up on my old engine...this is a low mileage engine with good compression in all cylinders...why wouldn't it make the same power? My clutch slipped on the 426rwhp pull...it was headed for the 430-440rwhp range.

    4) the car is worth at a minimum $5G's.....someone could part the car out with all the upgrades I have for more than $5g's....all parts are either brand new or has about 1100 miles on them...I just paid $2000.00 for the JDM engine (25k's as told to me...it's pretty clean).

    5) I'm not selling any pieces...it's a package deal.....I have some pics of the car with the chrome rims.....yes, the 18" bronze ones on these pics look better than the 16" chrome ones....and I do have the original wheels.

    6) I'm more interested in trading for; 240sx (S14 or S13 coupe only), 1 or 2G DSM GS-x, Mr-2 turbo, or a 600-750cc sport bike.

    Sorry for the delay, thanks for the compliments and interest.
    Reply With Quote Reply With Quote
  17. 07-22-2005, 10:16 AM #17
    crxsiguy
    crxsiguy is offline
    Billy0cean crxsiguy's Avatar
    Join Date
    Dec 2002
    Location
    PimpsVille, GA
    Age
    43
    Posts
    2,579
    Rep Power
    27

    Default

    ok well I am offering to trade my 2G GSX give me a call and we might work something out.... 404 207 2503 ~mike
    Toxxxic's job interview
    toxxxic (3:23:28 PM): "Describe yourself in three words" ..... down to fVck"


    New Project coming soon!
    Reply With Quote Reply With Quote
  18. 07-16-2005, 07:15 PM #18
    TommyD1919
    TommyD1919 is offline
    Certified Gearhead
    Join Date
    May 2005
    Age
    48
    Posts
    431
    Rep Power
    21

    Default

    Ok how much, you have my interest and I have some money to spend so give me a price Thanks
    Reply With Quote Reply With Quote
« Need an automatic japanese car under $1,000 for work. | FS: 1997 Audi A4 1.8t Quattro »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!