Page 1 of 2 12 LastLast
Results 1 to 40 of 59

Thread: mod lists, share and be cool.

  1. #1
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default mod lists, share and be cool.

    im just wondering, what is everyone running? planning to run? and please, no bullshit, because i have just been reading someones "mod list" only to find them contridict themselves in another thread so lets be honest. also, post a user name to verify it, so its not dumbasses trying to e-hussle.

    right nowSNapper can verify)
    stock 1.8L with bolt ons- header, intake, exhaust
    sport springs
    no interior
    front and rear sway bars
    front strut bar
    2 bride seats
    stage 1 clutch

    soon:
    t3 turbo
    hks turbo manifold
    straight piping
    330 injectors
    fpr
    b.controller
    10psi

    so nothing special. i know. but i just feel if we had a thread like this, then it would stop all the bickering about spraying and lying bout what u have etc.
    anyone else wanna share?
    Last edited by cherry kool aid; 05-02-2006 at 07:34 AM.
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  2. #2
    Got 345's?
    Join Date
    Sep 2005
    Age
    43
    Posts
    199
    Rep Power
    21

    Default

    Smooth tubes, no cats, VEC2, S&B filters, with a new raidator....
    Last edited by smackdown; 05-02-2006 at 11:04 AM.
    94mtec/98gts

  3. #3
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default

    lol, thanks for ur honesty.......
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  4. #4
    akaDick em Down Tony PSINXS's Avatar
    Join Date
    Apr 2005
    Location
    20 side of thangs
    Age
    40
    Posts
    11,782
    Rep Power
    34

    Default

    91 240sx base model with SR20det

    t28bb S15 turbo
    greddy fmic
    walboro 255
    3inTBE
    turbo xs dual stage BC
    greddy Turbo Timer(courtesy 1/4 mIle)
    Super afc 2 (courtesy 1/4 Mile)
    hks 272 cams step 2
    hks double valvesprings
    rps max clutch (sprung)
    fidanza flywheel 11lbs
    arp headstuds
    greddy type RS bov
    HKS RAS
    eagle rods H-beam
    cp pistons (86.5mm .02 over)
    JWT Bronze Valve Guides
    3 angle valve job
    honed & decked block
    Surfaced head
    machined crank
    titanium retainers from Crower
    new throwout bearing
    Greddy pulleys
    new drive bealts
    new engine seals
    New timing chain
    VLSD
    greddy 1.2mm metal headgasket
    Tein Springs
    Tokico adjustable fronts n KYB Rears
    Greddy Strut Bar
    Oil Pressure n boost guage
    Wideband AEM UEGO controller n bosch sensor( Courtesy 1/4 Mile)
    (i probably left something off lol)

    Soon to come:
    GT35R
    AEM EMS
    Sard 840cc injectors
    Peak boost Manifiold
    Tial 38mm external wastegate
    22psi of boost
    Splitfire Coilpacks DIS

  5. #5
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default

    see? ^^ that is how u post in here.
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  6. #6
    Got 345's?
    Join Date
    Sep 2005
    Age
    43
    Posts
    199
    Rep Power
    21

    Default

    ok ok i changed it...

  7. #7
    www.BatlGround.com Tracy's Avatar
    Join Date
    Jan 2004
    Location
    ATL
    Age
    48
    Posts
    19,636
    Rep Power
    50

    Default

    "03 Evo 8
    : : : Engine
    2 Walbro 255 fuel pumps
    Aeromotive fuel pressure regulator
    Earls stainless fuel lines and fittings
    Russel fuel pressure gauge
    Rochester 1000cc fuel injectors
    Nitrous Express direct port nitrous system with carbon fiber bottle, heater and purge 100-200hp)
    Bj’s sheet metal intake manifold and fuel rail
    Holley 75mm throttle body
    Tial Blow off valve
    Tial 44mm vband clamp wastegate
    Garrett gt35r turbocharger
    Schearer stainless steel tubular exhaust manifold
    Garrett core front mount intercooler with custom endtanks and piping
    Custom 3” stainless mandrel bent full exhaust system with magnaflow muffler
    K&N 4 inch intake filter
    Custom 4 inch air intake
    Odyssey mini battery
    Aem cdi
    Aem ems
    Aem wideband oxygen sensor
    Aem 5 bar map sensor
    Aem intake air temperature sensor
    Taylor 10mm spark plug wires
    Msd twin tower coil packs
    2.3 Liter Stroker Motor
    4g64 crankshaft z
    Pauter connecting rods
    Ross racing pistons with rings
    Federal mogul main and rod bearings
    Arp head studs
    Ferrea 1mm oversized valves
    Ferrea dual valve springs
    Ferrea titanium retainers
    Ferrea keepers
    Race ported and polished head
    Tomei Camshafts
    Tomei cam gears
    Hks evc 5 boost controller
    Custom methanol injection kit
    Exedy triple carbon clutch
    Valvoline syn power 20-50 motor oil
    Redline shockproof gear oil for transfer case and rear differential
    BG syncroshift manual transmission oil

    : : : Suspension
    Privat Fahren 18x8.5 rims
    Dunlop Direzza tires 255/35/18
    Tein Basic Coilovers
    Goodrich brake line
    Ferrado Brake pads

    : : : Drivetrain
    Shepherd built transmission

    '95 240
    : : : Engine
    Sr20det engine provided by Jarco, INC
    Ferrea valve springs and titanium retainers
    Megan racing intake manifold
    Megan Racing O2 housing
    Megan Racing 3 inch downpipe
    Megan Racing front mount intercooler
    Megan Racing turbo manifold
    Garrett gt2871r turbocharger
    Competition clutch twin plate racing clutch
    Cometic head gasket
    Arp head studs
    Nismo 750cc injectors
    Walbro 255 fuel pump
    Xs power t25 tubular exhaust manifold
    Custom testpipe
    Apex gt spec exhaust
    Moroso enlarged and baffled oil pan
    Koyo racing radiator
    Flexalite dual 12 inch cooling fans
    Greddy type s blow off valve
    Hks dli ignition amplifier
    Batlground chipped and tuned ecu
    Apex safc fuel computer
    Greddy profec b boost controller

    : : : Suspension and Exterior
    Maxxis MAZ1 tires in rear 255/35/18
    Maxxis MAZ1 tires in front 225/40/18
    Privat 18x9.5 inch rims in rear
    Privat 18x8.5 inch rims in front
    Megan Racing Track coilovers
    Megan Racing strut bars
    Vinyl by AP signworks
    Alignment work by Grand Turismo East
    300zx Front Brakes
    Powerslot rotors
    EBC green stuff brake pads
    Goodrich stainless brake lines
    Motul Brake fluid

    : : : Interior
    Megan Racing steering wheel hub
    Autopower 8 point scca legal roll cage
    Sparco carbon fiber seats
    Sparco steering wheel
    Val for president!

    Facebook.com/TracyATL

  8. #8
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default

    but isnt that an intercooler in ur pic? j/w?
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  9. #9
    www.BatlGround.com Tracy's Avatar
    Join Date
    Jan 2004
    Location
    ATL
    Age
    48
    Posts
    19,636
    Rep Power
    50

    Default

    Quote Originally Posted by cherry kool aid
    but isnt that an intercooler in ur pic? j/w?
    huh?
    Val for president!

    Facebook.com/TracyATL

  10. #10
    Got 345's?
    Join Date
    Sep 2005
    Age
    43
    Posts
    199
    Rep Power
    21

    Default

    He is talking about me Tracy...
    94mtec/98gts

  11. #11
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default

    yea, thats towards smackdown. i mean, if it is, why hide what mods are done to your viper, its a viper, its fast anyways.... its not like someone is gonna see that and be like, oh, its just a viper with pipes, SLOOOOOWWW.
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  12. #12
    Senior Member
    Join Date
    Jan 2003
    Location
    kennesaw ga
    Age
    43
    Posts
    1,596
    Rep Power
    24

    Default

    yeah he is building a turbo kit for his mtech bmw

  13. #13
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default

    then why have the intercooler infront of his viper and put new radiator.......
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  14. #14
    www.BatlGround.com Tracy's Avatar
    Join Date
    Jan 2004
    Location
    ATL
    Age
    48
    Posts
    19,636
    Rep Power
    50

    Default

    Quote Originally Posted by smackdown
    He is talking about me Tracy...
    oh. Hi BTW
    Val for president!

    Facebook.com/TracyATL

  15. #15
    Got 345's?
    Join Date
    Sep 2005
    Age
    43
    Posts
    199
    Rep Power
    21

    Default

    ^^^ Whats up..

    It was a joke.... my bad sorry...
    The intercooler is for my
    94 BMW mtec
    2.5L
    ported head
    stock block and internals
    AA tune
    AA exhaust
    AA mid race pipe
    AA cool air
    soon to be T-61 waiting for the fuel system and a few other parts before i start to take it apart.

    To many other little things that dont make it fast
    94mtec/98gts

  16. #16
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default

    gotcha i wasnt tryin to be an ass just wondering ya know?
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  17. #17
    I hate drifting Big Baller's Avatar
    Join Date
    Nov 2003
    Location
    In the Fucking A
    Age
    45
    Posts
    4,101
    Rep Power
    28

    Default

    1990 240sx.

    Stock with shocks
    Quote Originally Posted by Slowwrx
    I fucked ©hris's mom

  18. #18
    Got 345's?
    Join Date
    Sep 2005
    Age
    43
    Posts
    199
    Rep Power
    21

    Default

    cool. I had all the parts layed out trying to figure out what else i need and i thought it would be a funny pic.. I dont have an extra 15g's to put a turbo on the viper...
    94mtec/98gts

  19. #19
    NalleyToyota Manager ct9a gsr's Avatar
    Join Date
    Mar 2005
    Location
    Kennesaw, Ga
    Posts
    3,079
    Rep Power
    25

    Default

    Quote Originally Posted by PSINXS
    Soon to come:
    GT35R
    22psi of boost
    That 35r's gonna be yawning at that boost level. =]
    www.toyotaofroswell.com
    Current: '04 S2000
    Past 700whp+ Cars: '03 Z06 | '94 Supra | '03 Evo VIII | Too Many...

  20. #20
    Drifter/Kneedragger
    Join Date
    Nov 2002
    Location
    Buford, GA, USA
    Posts
    6,528
    Rep Power
    30

    Default

    Quote Originally Posted by smackdown
    ^^^ Whats up..

    It was a joke.... my bad sorry...
    The intercooler is for my
    94 BMW mtec
    2.5L
    ported head
    stock block and internals
    AA tune
    AA exhaust
    AA mid race pipe
    AA cool air
    soon to be T-61 waiting for the fuel system and a few other parts before i start to take it apart.

    To many other little things that dont make it fast

    sounds similar to my buddy Brett's car. from what i hear it's a wicked setup but i haven't gotten to see it run yet in person.

  21. #21
    Got 345's?
    Join Date
    Sep 2005
    Age
    43
    Posts
    199
    Rep Power
    21

    Default

    Hope to have all the parts this month. It should be a fun project. Buying the ecu and the tune wiil cost more than the parts...
    94mtec/98gts

  22. #22
    Senior Member | IA Veteran Speedm0(\)key's Avatar
    Join Date
    Apr 2005
    Location
    Stone mountain GA
    Age
    43
    Posts
    6,717
    Rep Power
    27

    Default

    Nissan 350z:

    -Varis Carbon fiber cold air duct......>
    -SPL jethotcoated intake tube........> SPL intake kit
    -JWT popcharger..........................>
    -Borla True Dual Exhaust
    -Custom shifter lever LOL, Nismo S15 leather short knob

    Subaru WRX STi:

    -Cobb Accesport, stg 2 map for 93 oct. (loaded.. but never used 100octane map)
    -Perrin Divorced wg 3'' catless Downpipe
    -HKS Hipower 3'' catless Exhaust
    -Kartboy Shortshifter w/bushings
    -Injen Cold air intake
    -Injen SES front Mount intercooler
    -Omari Boost Gauge (factory.. cause im a jew)
    -AEM uego a/f
    -18.5 Psi on stock VF39
    2004 Nissan 350z Trng
    2004 Subaru WRX STi

    solamente los putos te llegan en numeros

  23. #23
    superduper LLLLLLLLL
    Join Date
    May 2003
    Location
    Gwinnett
    Posts
    5,599
    Rep Power
    28

    Default

    1998 240sx
    automatic with original ka24de - 120xxx miles
    something is wrong with the car right now, it's not making boost..

    mods:
    6.5 sony speakers in the front
    JIC flt-a1 full coilover kit
    synpower valvoline oil change
    new spark plugs

  24. #24
    i am jill's nipple. fight club's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett ftw!
    Age
    41
    Posts
    3,210
    Rep Power
    24

    Default

    lol why would a ka24de make boost?!?!?! LOL
    When I was a child, I used to talk as a child, think as a child, reason as a child; when I became a man, I put aside childish things.

  25. #25
    Jay G. 1439/2000's Avatar
    Join Date
    Jan 2004
    Location
    Location, Location...
    Posts
    6,375
    Rep Power
    30

    Default

    Under Hood

    Extreme Motorsports level 3 Big 16G turbo (ported/clipped)
    Extreme Motorsports 95 ported manifold
    Extreme Motorsports ported 02 housing with dump
    Extreme Motorsports 3inch downpipe
    HKS Hiper exhaust with twin tips
    Blitz air filter
    2g Maf w/ Dejon intake
    Web cams(272s)
    Bosch 500HP in tank fuel pump
    Evo 8 560cc injectors
    4g performance FMIC setup
    HKS SSQV BOV
    Greddy Kevlar Timing belt kit
    Wiseco 2g pistons/Eagle 1g rods
    Ralliart 4 layer headgasket
    ARP headstuds
    Clutch Specialties 2900lb clutch kit

    Suspension/Brakes

    Koni yellow shocks/struts
    H&R race lowering springs
    Forgeline RS 16X8 wheels
    Yokohama AVS es100s
    Powerstop rotors
    Hawk Brake Pads
    Stainless steel brake/clutch lines

    Exterior

    89 Grille
    90 Galant GSX tails
    JDM headlights with City Lights
    JDM replica decals.
    PIAA foglights
    Thule Bike Rack
    15% tint

    Interior

    1G Steering Wheel
    Blitz BL series boost gauge
    Blitz BL series EGT gauge
    Lotek dual a pillar pod
    Cyberdyne A/F gauge
    Apexi S-AFC II
    HKS D1 shift knob
    Greddy Profec Old Style
    Alpine MP3/CD/CDR/ head unit with remote
    Viper alarm system.
    Pioneer 4 channel amp

  26. #26
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    2005 G35

    so far...
    z-tube w/ jwt pop-charger

    too come in near future
    fujitsubo legis r exhaust
    plenum spacer


    ya im slow

  27. #27
    akaDick em Down Tony PSINXS's Avatar
    Join Date
    Apr 2005
    Location
    20 side of thangs
    Age
    40
    Posts
    11,782
    Rep Power
    34

    Default

    Quote Originally Posted by Big Baller
    1990 240sx.

    Stock with shocks
    ahahahahaha

    Charles i figure at that many psi i wil be making the power i want just enough to do want i wanna do.

  28. #28
    2.3 Evo 8
    Guest

    Default

    stock bottom end
    stock head
    stock intake mani

    HKS 280 cams
    Exedy triple carbon clutch
    HKS DLI 2 ignition
    Buschur 3 in turbo back exhaust
    Buschur upper and lower intercooler piping
    1G bov
    AEM EMS w/wideband
    Buschur fmic
    1000cc injectors
    Buschur ported exhaust mani
    Buschur 20g turbo
    methanol injection
    walboro 255 pump

  29. #29
    Senior Member
    Join Date
    Nov 2002
    Location
    Cumming,Ga
    Age
    42
    Posts
    1,088
    Rep Power
    24

    Default

    3.8L block .30 over
    Dimond pistons
    6.0 Oliver rods
    forged eagle crank
    70mm thorttle body
    Champion on-center intake
    solid 224/224 high energy roller cam
    solid lifters
    Clevite main bearings
    Clevite rod bearings
    GN1 aluminum heads
    a/c delete
    th400 trans w/ trans brake
    Terry Huston 3.5 down pipe w/ test pipe
    Kenne Bell headers
    MSD DIS-4 coil interface module
    DIS-4 HO rotory dial
    JW Chrome Moly flywheel
    Steel Main Caps
    FAST stand alone
    Garrett GT72Q turbo
    RJC mega cooler
    Turbo Luber
    Ford 9" with detroit locker
    Denny's nitrous ready drive shaft
    Nitrous (still undecided, have the the kit but unplugged)
    ATR 3" dual exhaust
    75# injectors

    Thats all I can remember, going in '86 Buick

  30. #30
    Untouchable
    Join Date
    Oct 2003
    Location
    Lawrenceville
    Age
    45
    Posts
    2,725
    Rep Power
    24

    Default

    I didnt think anyone was gonna do this but oh well, I guess i will play along

    Mod list
    redtop sr20det
    jgy topfeed fuel rail w/72lbs injectors
    greddy intake manifold
    greddy rocker arm stoppers
    greddy metal head gasket
    hks 264 step 1 cams
    enjuku top mount log style manifold, turbo extension and wasgate dump tube
    tial 38mm wastegate w/11lbs spring
    garrett t3/t04e turbo 57 trim 63a/r
    hks 3" downpipe
    custom 3' exhaust, no cat and apexi canister
    cometic metal headgasket
    apr studs and bolts
    greddy FMIC
    greddy catch can
    apexi power fc w/ commander
    greddy turbo timer
    greddy boost controller
    z32 maf
    act street/strip clutch
    koyo 2 row aluminum radiator
    electric fans
    greddy type s bov
    apexi worldsport coilovers in the rear and unknown shock spring combo in the front
    cusco adjustable camber kit for front
    megan racing front strut tower bar and rear strut bar
    bfg drag radials

  31. #31
    S N a p p e r SNapper's Avatar
    Join Date
    Mar 2005
    Location
    Lawrenceville, Georgia
    Age
    39
    Posts
    4,603
    Rep Power
    25

    Default

    1990 celica with stock 3sgte
    2006 R1 with stuff on it

  32. #32
    v2.0 IndianStig's Avatar
    Join Date
    Sep 2004
    Location
    Gwinnett County
    Posts
    9,181
    Rep Power
    32

    Default

    stock accord with k&n filter, lawl

  33. #33
    All bark, no bite.
    Join Date
    Mar 2005
    Age
    42
    Posts
    3,368
    Rep Power
    25

    Default

    A non-VTEC honda with bolt-ons.
    Last edited by iloveboost; 05-06-2006 at 07:53 AM.

  34. #34
    Gods Chariot Vteckidd's Avatar
    Join Date
    Jul 2003
    Location
    Atlanta Centennial Park
    Age
    44
    Posts
    33,102
    Rep Power
    71

    Default

    88 CRX HF
    ENgine:???
    TRANNY:???
    TURBO:???
    Enterprise Data Resources- Ecommerce Project Manager
    -www.usedbarcode.net

  35. #35
    All bark, no bite.
    Join Date
    Mar 2005
    Age
    42
    Posts
    3,368
    Rep Power
    25

    Default

    Quote Originally Posted by vteckidd
    88 CRX HF
    ENgine:???
    TRANNY:???
    TURBO:???

    LIES!!

  36. #36
    It's just a Sentra
    Join Date
    Jan 2004
    Location
    Gwinnett, Georgia
    Age
    43
    Posts
    703
    Rep Power
    22

    Default

    Quote Originally Posted by vteckidd
    88 CRX HF
    ENgine:???
    TRANNY:???
    TURBO:???
    Yeah whatever you fear boost just like elephants fear rats
    "If you want peace, prepare for war"

  37. #37
    Haulin A$$!!!!! BigPoppaHurtm's Avatar
    Join Date
    Feb 2006
    Location
    In my dreams.....
    Age
    40
    Posts
    1,591
    Rep Power
    21

    Default

    Spoon Style Airbox (cut off resonator to make it louder)
    K&N filter
    Koyo Rad
    ARC Rad Cap

    Fast enough to lose to a LS1 camaro by ONLY 5 carlengths


    OH, forgot to mention the comptech supercharger whose belt I havent attached yet
    Quote Originally Posted by GIXXERDK
    If it took a whole thread to figure out how to hide from ricers, you're a dumbass.

  38. #38
    Slowest Car on IA David88vert's Avatar
    Join Date
    Nov 2002
    Location
    Johns Creek
    Age
    53
    Posts
    8,378
    Rep Power
    37

    Default

    93 RX7
    - all stock
    - Just downpipe and catback

    92 Mustang
    - stock with a couple of bolt-ons (exhaust & related)
    - stock heads (everyone asks)
    - stock headers (everyone asks)
    - stock suspension (everyone asks)
    - subframe connectors

  39. #39
    [8GU] 8 GRAND UNDERGROUND
    Join Date
    Apr 2006
    Age
    37
    Posts
    14
    Rep Power
    0

    Default

    2003 Hyundai Tiburon~

    Exterior-
    Black Rims
    Tinted Tail Lights
    Tinted window's 20%
    Blue Headlights


    Interior~
    Panasonic Head Unit
    Faze Air Fuel Ratio Gauge
    2 seater conversion
    12in Alpine Type-S in a jl W7 Box.
    700Watt Bazooka Amp



    Performance-

    Cold Air Intake
    Apexi N1 Exhaust
    Stage 1 Clutch
    9lb Flywheel
    50 shot of dry nitrous <my bottle is umm never filled but hey i still have it installed :-D>
    autolight spark plugs
    STS
    Lowered 1.5in front 1.7rear.


    so im basically stock lol but hey it looks pretty

  40. #40
    Asian Persuasion KevinT707's Avatar
    Join Date
    Mar 2005
    Location
    Marietta
    Age
    39
    Posts
    7,047
    Rep Power
    29

    Default

    LS/VTEC
    -CP Pistons 10.5 Compression
    -Eagle Rods
    -Balanced & Blueprinted
    -Ferrea Valves
    -Rocket Springs & Retainers

    Auto-Manual Conversion
    Polished AEBS Intake Manifold
    CTR Crank Pulley
    CAI
    GSR Cams
    Fidanza 7 lb flywheel
    Comp Stg 2 Clutch
    4-1 Header w/2.5" collector
    Cam Gears
    B&M FPR & Gauge
    310cc Injectors
    255 Walbro Fuel Pump
    Custom 2.5" exhaust & 2.5" Magnaflow Cat

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!