Jason's Wallace's prayer

Printable View

Show 100 post(s) from this thread on one page

02-11-2006, 03:17 PM
WINDSOR

Quote:

Originally Posted by Luv2spd

You are right. He probably did say that. Commerce is 2 hrs away and Reynolds is 2.5 hrs away. That is why it is a waste for us. Why would we drive that far to a track to race someone "in x months"? That is what it always is. Someone is asked to race, they say no but I'll race you at the track. Why? What is the point if you're not wanting to get a time. To be legal? Doubt it.

Well i'm just saying for someone that doesn't like going to the track i have a hard time believeing someone who says they run 9.8@146. It takes a lot of track time to run that number. Ask jerry how many parts he has gone through to run a 9.98 in his vert. Hell i can say my runs low 9s at 150 too. I mean i have the motor and turbo to do it.
02-11-2006, 03:18 PM
Speedm0(\)key

Quote:

Originally Posted by Luv2spd

We aren't friends with yall. We will make a trip out and race when it is convenient to us. Right now it is not.

oh really.. well SHUT THE FUCK UP until the time is "RIGHT"
02-11-2006, 03:23 PM
WINDSOR

Quote:

Originally Posted by vteckidd

Obviously you underestimate 240whp in a 200lb chassis.

Luv2spd, are you up for a friendly run? just curious, we can shake hands at teh end, whoever wins, and go our seperate ways. im just a little NA car ;)

i got $20 on vteckidd
02-11-2006, 03:26 PM
5.7camal

Quote:

Originally Posted by Luv2spd

5.7Camel, don't get mad because someone said your car is slow. Just a fact. You'd have to seriously build your LT1 to hang with some of these guys. As for power to weight ratio, since you all remember Jerry's car, his car is full weight. Probably around 35-3600lbs and 750 hp. What does your import make and run? Your little turbos and the few with built motors can't hang. End of story. :lmfao:

i never said my car was fast... the race will decide that!
as far as who ever jerry is... sure ill race him... lose yes i will but well see by how much. Luv2swallow we will race and get it on video... Deal?

the largest flaw about f bodies is their weight.... no secret. thats y corvettes are alot better than f bodies stock for stock for that reason.

RACE VTECCKID!!!!! ill video tape!
time and place?

opps i mean when its convenient for luv2swallow...

on a lighter note... what u doin later wanna go get a couple of beers and go to a hockey game baby?
02-11-2006, 03:27 PM
5.7camal

when will it be conveient for u?
what if we come to yall?
so there are no excuses!

blumpkin
02-11-2006, 06:07 PM
v10sloboy

Ill race him. hahahahahaha
02-11-2006, 06:37 PM
5.7camal

the lets get a 3 way.... v10sloboy, luv2spd, vteckid. or heck a 4 or 5 way and will include giovani's z32tt and SM's STI....

ne takers?
got real quit after mike said hed run her for shits and giggles!

now who do you think would win luv2spd or XXEXTM12XX?

hahaha
02-11-2006, 09:16 PM
5.7camal

haha
02-11-2006, 10:29 PM
PawnShopCEO

i got 1000$ that i can put 400 lbs of weights in johns trunk and he rapes every one of those cars by 10 lengths
02-11-2006, 10:59 PM
5.7camal

aight whos john?

this goes for me too..
lets refer to ppl by their name on here.. if they aint on here then say so cuz shit is really confusin....

either way... luv2spd, smoknu, and bcrafty all quit talkin when they got challenged!
02-11-2006, 11:25 PM
BCRAFTY

Quote:

Originally Posted by 5.7camal

bcrafty y dont u work on your own car?

i do all the shit myself if yall beat me then u beat me and MY HARDWORK...
fuckin payin other ppl to do your shit thats lazy.... or shows lack of knowledge.

agian i got u u said oh blah my car traps blah at this ET in the 8th so that means by a math equation i looked up on the net my car runs this 1/4
honestly who cares what all the other f bodies run in GA its about ur faggy ass car.
they dont wanna drive their cars that far because they might break something and dont have the knowledge to fix it or know whats wrong..

nothing works on my car it wont start no lights etc... must be the starter... haha its my tranny... ever check to see if the battery was connected at both terminals... oh shit that was it damn ur smarted!
well no shit

luv2swallow smoknU do u guys have time slips or dynos? as mike and others have asked for

Well i don't have the space to work on my car.. And trust me i can do anything that needs to be done...
02-12-2006, 12:04 AM
5.7camal

ok ill trust u. most ppl dont and just wont admit it.
i find it more with imports though... not that it fuckin matters i just dont ahve as much respect for that...
02-12-2006, 12:04 AM
5.7camal

u should race vteckidd or Speedmonkey's sti until i get up n runnin!
02-12-2006, 03:12 AM
PawnShopCEO

crafty motor vs vteckidd motor would be interesting
02-12-2006, 06:50 AM
BCRAFTY

Thats cool.. I'll race anyone.. But seriously all this bitchin and fightin needs to stop, were al in this shit for the same reason.. We love cars and we love to go fast...
02-12-2006, 09:09 AM
smackdown

Quote:

Originally Posted by WINDSOR

when was this? I started to do motor work on my car back in 1998..that was my old white lx. I know Ron from the old days when he used to drive his red car on the street a lot and i knew him when he had his black cobra convertible. I've met john v10sloboy only recently.

The best was when ron was hammerfaced and did a 360 on barrett into the curb and drove off...
02-12-2006, 09:43 AM
5.7camal

Quote:

Originally Posted by BCRAFTY

Thats cool.. I'll race anyone.. But seriously all this bitchin and fightin needs to stop, were al in this shit for the same reason.. We love cars and we love to go fast...

good the same way i feel. all this resentment!

when yall gonna race... that is if mike still wants to race...
02-12-2006, 09:45 AM
v10sloboy

John is me
02-12-2006, 09:53 AM
5.7camal

got ya.
02-12-2006, 09:54 AM
Vteckidd

i would race, but i blew my clutch up, im down for the time being
02-12-2006, 09:56 AM
v10sloboy

Quote:

Originally Posted by vteckidd

i would race, but i blew my clutch up, im down for the time being

Must be the torque hahahahaha
02-12-2006, 09:59 AM
Vteckidd

yeah all 160ft/l;bs of it. i dont know im about to pull the trans off
02-12-2006, 11:41 AM
SMOKENU

Here is the stuff I found. I can't find any track slips, I throw them away when they are in the car. Here is a picture of my car launching the day I ran a 9.8 with my old setup. If you don't believe me, sorry you will just have to find out soon enough. Here is also a dyno from when I originally had my car tuned on pump gas. The first pulls were untuned, the second was final tune on 93 pump gas.

http://www.kellydyer.com/sitebuilder...52-600x425.jpg

http://www.kellydyer.com/sitebuilder...t7-600x341.jpg
02-12-2006, 11:47 AM
Vteckidd

looks ike you made around 630whp? is that correct? what was your 60ft and 1/8 mile ET if you dont mind
02-12-2006, 01:31 PM
BCRAFTY

Damn PIMP.. :eek: look at the free space under those tires :eek: ... The car didn't end up in some old ladies yard at the end of that run, did it?
02-12-2006, 01:47 PM
SMOKENU

Quote:

Originally Posted by vteckidd

looks ike you made around 630whp? is that correct? what was your 60ft and 1/8 mile ET if you dont mind

The 60ft was around a 1.6 or 1.7. The car made 655RWHP and 603RWTQ on 93 pump gas. I don't remeber the 1/8th mile time. Like I said I don't keep the time slips from the track unless it is some kind of big acheivment to me. As I run the car I throw them in the console at the track and the next time I clean out my car they go in the garbage. Like I said before this is my old setup so none of this even matters to me anymore becuase it doesn't exist anymore. I don't have any times or dyno on the new setup yet. Everyone will just have to run me and they can tell how it runs from there.
02-12-2006, 01:49 PM
SMOKENU

Quote:

Originally Posted by BCRAFTY

Damn PIMP.. :eek: look at the free space under those tires :eek: ... The car didn't end up in some old ladies yard at the end of that run, did it?

Yeah my tires got up and got the job done. Unlike you. Well thats whatalli told me. :lmfao: :lmfao: :lmfao: :lmfao: :2up:
02-12-2006, 01:50 PM
Speedm0(\)key

Quote:

Originally Posted by SMOKENU

The 60ft was around a 1.6 or 1.7. The car made 655RWHP and 603RWTQ on 93 pump gas. I don't remeber the 1/8th mile time. Like I said I don't keep the time slips form the track unless it is some kind of big acheivment to me. As I run the car I throw them in the console at the track and the next time I clean out my car they go in the garbage. Like I said before this is my old setup so none of this even matters to me anymore becuase it doesn't exist anymore. I don't have any times or dyno on the new setup yet. Everyone will just have to run me and they can tell how it runs from there.

sounds good to some of us, when will the car be ready? approximately
02-12-2006, 01:51 PM
Speedm0(\)key

Quote:

Originally Posted by vteckidd

i would race, but i blew my clutch up, im down for the time being

im having clutch/tranny issues in the Z... but i have a warranty YAY!
02-12-2006, 01:51 PM
SMOKENU

Quote:

Originally Posted by SpeedM0nkey

sounds good to some of us, when will the car be ready? approximately

I would say 2 weeks or so. I hope to have it up and running next week. Then work out the tuning.
02-12-2006, 01:55 PM
BCRAFTY

Quote:

Originally Posted by SMOKENU

Yeah my tires got up and got the job done. Unlike you. Well thats whatalli told me. :lmfao: :lmfao: :lmfao: :lmfao: :2up:

Thats just fucked up... :rant: :blah: :zxflipoff :321: :cussing: :2up:
02-12-2006, 01:55 PM
SMOKENU

Quote:

Originally Posted by BCRAFTY

Damn PIMP.. :eek: look at the free space under those tires :eek: ... The car didn't end up in some old ladies yard at the end of that run, did it?

Hey craft

Here is the setup that your wanted to see. It should run very well :goodjob:

http://i46.photobucket.com/albums/f1...percharger.jpg
02-12-2006, 01:56 PM
BCRAFTY

Quote:

Originally Posted by SMOKENU

Hey craft

Here is the setup that your wanted to see. It should run very well :goodjob:

http://i46.photobucket.com/albums/f1...percharger.jpg

ha I can't wait till it's put in.. i should run mid 12's... :lmfao:
02-12-2006, 02:03 PM
GrammerChic

Quote:

Originally Posted by SpeedM0nkey

9 @ 146 sounds like a pass with significant amount of traction issues.. you are correct.

and yeah.. like windsor said.. it does indeed sound like a made up time...
and shows people.. ricers are not only in imports (ext12mvx) also in domestics (bcrafty,smokenu)

:lmfao: :lmfao: :lmfao: :lmfao:
02-12-2006, 03:40 PM
rolling_trip

1 Attachment(s)

i wonder what that is considered, belt driven turbo? Anyway its pretty badass, although i pefer this setup better. Iknow, Iknow it is not as clean as what yall posted
02-12-2006, 03:42 PM
Speedm0(\)key

Quote:

Originally Posted by rolling_trip

i wonder what that is considered, belt driven turbo? Anyway its pretty badass, although i pefer this setup better. Iknow, Iknow it is not as clean as what yall posted

i prefer this one as well, makes more sense to me.. dont like superchargers
02-12-2006, 03:50 PM
Vteckidd

found out what it was, sheared every spline off my clutch disk. damn this bitch is eatin transmissions and clutches
02-12-2006, 04:16 PM
Speedm0(\)key

Quote:

Originally Posted by vteckidd

found out what it was, sheared every spline off my clutch disk. damn this bitch is eatin transmissions and clutches

how come mike?.. what tranny/clutch were in the car?
02-12-2006, 04:19 PM
v10sloboy

sounds like someone is launching pretty hard
02-12-2006, 04:26 PM
5.7camal

nice engine!
is that going into a truck or the firebird?
is that a t90?

thats crazy...
http://www.baldturbofreak.com/projec...?inStoreFrame=
check this out
its a dude on Covette forum who bought a turbo from CAT like the company that makes construction vehicles... it was off some huge ass truck!

Show 100 post(s) from this thread on one page