ACCORDM3 CALL OUT...

Printable View

Show 100 post(s) from this thread on one page

01-30-2006, 05:05 PM
5.7camal

Quote:

Originally Posted by BCRAFTY

Sean, Everything i said was the truth. My car has nothing more than what i have already said.. But it really sounds like your bitchin out of this little race with an f-body... So if your gonna call me out for a little 200 dollar money race , you better not puss out..

Wallace, you are nothing but a ricer.. I made you an "Under Construction" sticker for your window...

man i was just kidding about racing for the tranny man.
haha
no im gonna race all of yall be sure of that
im not pussyin out.
u wanna race we will. trust me. it will be about 2-3 months
so agian its under the knife.

later
Sean
01-30-2006, 05:31 PM
Spin2nd

Quote:

Originally Posted by BCRAFTY

Bart, just to let you know, in ls cars, nitrous cams are big.. turbo and blower cams are small with big lift.. I can give you a couple of ideas if you want , just so your "facts" are facts next time...

So you're telling me a dual pattern nitrous cam that inherently gives up a bit on the top end due to the increased lobe separation and exhaust duration is going to run with a purpose built high lift N/A grind cam? A blower/turbo cam WILL be weak -- and a purpose built nitrous cam is gonna be pretty much as strong as an N/A cam until the top 1/3rd or so of the RPM band -- and that's where these peak numbers everyone likes to quote so much come from. Go throw a .600+ lift, high rpm cam with agressive timing and fuel map in Del's motor and watch it pick up...or maybe Ls1's operate on a different set of physics than the rest of the earth.
01-30-2006, 05:57 PM
PawnShopCEO

Quote:

Originally Posted by BCRAFTY

Sean, Everything i said was the truth. My car has nothing more than what i have already said.. But it really sounds like your bitchin out of this little race with an f-body... So if your gonna call me out for a little 200 dollar money race , you better not puss out..

Wallace, you are nothing but a ricer.. I made you an "Under Construction" sticker for your window...

Bring you piece out tonight and we'll run... my motor against your motor
01-30-2006, 06:17 PM
BCRAFTY

Quote:

Originally Posted by Spin2nd

So you're telling me a dual pattern nitrous cam that inherently gives up a bit on the top end due to the increased lobe separation and exhaust duration is going to run with a purpose built high lift N/A grind cam? A blower/turbo cam WILL be weak -- and a purpose built nitrous cam is gonna be pretty much as strong as an N/A cam until the top 1/3rd or so of the RPM band -- and that's where these peak numbers everyone likes to quote so much come from. Go throw a .600+ lift, high rpm cam with agressive timing and fuel map in Del's motor and watch it pick up...or maybe Ls1's operate on a different set of physics than the rest of the earth.

What i was saying is that 98% of nitrous cams are ground for a duel purpose use... I know what del's specs are and it's a na/nitrous cam. Don't get me wrong, del's car is fast as fuck. I just think with a little better set up.. it should run alot harder.. Sorry i reread that post and it was a little mean. Sorry bart didn't want it to come off that way..
01-30-2006, 06:19 PM
BCRAFTY

Quote:

Originally Posted by accordm3

Bring you piece out tonight and we'll run... my motor against your motor

the bolts got sheard off my flex plate sunday.. so i have to buy a new one...
01-30-2006, 07:05 PM
Speedm0(\)key

Quote:

Originally Posted by BCRAFTY

the bolts got sheard off my flex plate sunday.. so i have to buy a new one...

:rly:
01-30-2006, 08:17 PM
TheSnail

So: Bcrafty(Camaro) vs run4cover(240) vs Camel(Vette) vs Snail(240), this weekend?

Camel would probably win, but I'm after Bcrafty then run4cover. Are you guys near/in marietta?
01-30-2006, 08:22 PM
5.7camal

agian i can not drive my car until i get new rear rims and tires.
i will def be up for it when i get it back together!

ill come watch and or race in my volvo 850 non turbo 3600 lbs 130 hp i think
hahaha
01-30-2006, 08:24 PM
run4cover

Quote:

Originally Posted by BCRAFTY

Oh i know who your talking about, that guys car is black and it's a 6-speed, mine is white and an auto..

Oh, my apologies then....*spins off looking for a black 6-speed LS1 with the "magic stick"* :lmfao:
01-30-2006, 08:39 PM
run4cover

Quote:

Originally Posted by TheSnail

So: Bcrafty(Camaro) vs run4cover(240) vs Camel(Vette) vs Snail(240), this weekend?

Camel would probably win, but I'm after Bcrafty then run4cover. Are you guys near/in marietta?

since everyone else is down for the count, I will be too :D ....you haven't told us what you have for mods, everyone pretty much knows my car is just a plain 'ol bolt-on sr20...nothing special or particularly fast. I thought bcrafty was the cat with the cam only ls1 that supposedly dyno's in the low 400's....that be who I'm looking for :king:

Since I'm not one to turn down a race, I'll decline this weekend, because the s13 is going down for another lung transplant :D

rest assured, I'll be calling someone out when it's back up and running. Don't you have an rb26? why would you want to race a bolt-on sr20det? Isn't it obvious who would win?
01-30-2006, 09:14 PM
SMOKENU

Quote:

Originally Posted by run4cover

since everyone else is down for the count, I will be too :D ....you haven't told us what you have for mods, everyone pretty much knows my car is just a plain 'ol bolt-on sr20...nothing special or particularly fast. I thought bcrafty was the cat with the cam only ls1 that supposedly dyno's in the low 400's....that be who I'm looking for :king:

Since I'm not one to turn down a race, I'll decline this weekend, because the s13 is going down for another lung transplant :D

rest assured, I'll be calling someone out when it's back up and running. Don't you have an rb26? why would you want to race a bolt-on sr20det? Isn't it obvious who would win?

The black 02 Z28 is mikes car your talking about.He has sold most of the car off. He's putting back stock. He sold the 12bolt and the bolts ons as of now that I know of. The car did make 415RWHP on the bolt on cam only. I guess you will never get your race too bad. I guess you will have to stick to crafty's ass.
01-30-2006, 10:32 PM
TheSnail

Quote:

Originally Posted by run4cover

since everyone else is down for the count, I will be too :D ....you haven't told us what you have for mods, everyone pretty much knows my car is just a plain 'ol bolt-on sr20...nothing special or particularly fast. I thought bcrafty was the cat with the cam only ls1 that supposedly dyno's in the low 400's....that be who I'm looking for :king:

Since I'm not one to turn down a race, I'll decline this weekend, because the s13 is going down for another lung transplant :D

rest assured, I'll be calling someone out when it's back up and running. Don't you have an rb26? why would you want to race a bolt-on sr20det? Isn't it obvious who would win?

My old car was a rb26. My new car is a stock sr.
01-30-2006, 10:45 PM
BCRAFTY

Quote:

Originally Posted by SMOKENU

The black 02 Z28 is mikes car your talking about.He has sold most of the car off. He's putting back stock. He sold the 12bolt and the bolts ons as of now that I know of. The car did make 415RWHP on the bolt on cam only. I guess you will never get your race too bad. I guess you will have to stick to crafty's ass.

HA HA HA
01-30-2006, 10:50 PM
TheSnail

^ I'll race you from a 50mph roll.
01-30-2006, 10:56 PM
BCRAFTY

k...
01-31-2006, 06:40 AM
v10sloboy

Sorry guys but the sr's will loose bad. I can put money on that.
01-31-2006, 08:44 AM
PawnShopCEO

brandon has sworn that he will sell his car if i beat him! ya know brandon.. autotrader is waitin on your car
01-31-2006, 08:52 AM
BCRAFTY

Quote:

Originally Posted by accordm3

brandon has sworn that he will sell his car if i beat him! ya know brandon.. autotrader is waitin on your car

I never said that.. but if i ever did.. it looks like my car is with me forever..
01-31-2006, 09:22 AM
PawnShopCEO

so full of it... john was there! cause we were talkin about how kyle made the same bet with me back in the day with his vette
01-31-2006, 09:37 AM
BCRAFTY

Quote:

Originally Posted by accordm3

so full of it... john was there! cause we were talkin about how kyle made the same bet with me back in the day with his vette

OH WELL MAYBE I JUST DON'T REMEMBER. I'M NOT TO WORRIED ABOUT IT...Dr. Wallace strikes again...
01-31-2006, 10:10 AM
PawnShopCEO

http://atlanta.craigslist.org/pts/130016430.html

camal here is a transmission for ya... its priced about the same as crafty paid for his
01-31-2006, 10:19 AM
mumbles

WOULD YOU FAGS JUST SHUT UP AND PUT YOUR MONEY WHERE YOUR MOUTH IS!!!! :lmfao:
01-31-2006, 10:24 AM
BCRAFTY

Quote:

Originally Posted by accordm3

http://atlanta.craigslist.org/pts/130016430.html

camal here is a transmission for ya... its priced about the same as crafty paid for his

lol ha ha ha.... ok here's the real link...Terminator 2

http://www.rosslertrans.com/Sale4l60e1.htm

and here's where wallace got his from.. holt shit it's the exact one...
http://cgi.ebay.com/CASE-195-HYDROST...QQcmdZViewItem
01-31-2006, 10:30 AM
BCRAFTY

Quote:

Originally Posted by mumbles

WOULD YOU FAGS JUST SHUT UP AND PUT YOUR MONEY WHERE YOUR MOUTH IS!!!! :lmfao:

Fuck off chris.. go back to work in ricers heaven.. lol
01-31-2006, 10:39 AM
mumbles

Quote:

Originally Posted by BCRAFTY

Fuck off chris.. go back to work in ricers heaven.. lol

yeah ricer heaven so why haven't you stopped by man. BURNT ORANGE ie.. RICE
01-31-2006, 10:42 AM
BCRAFTY

Quote:

Originally Posted by mumbles

yeah ricer heaven so why haven't you stopped by man. BURNT ORANGE ie.. RICE

thats just wrong.. EVERYONE LOOK I FOUND JASON WALLACE'S BROTHER!!!
01-31-2006, 10:45 AM
mumbles

Quote:

Originally Posted by BCRAFTY

thats just wrong.. EVERYONE LOOK I FOUND JASON WALLACE'S BROTHER!!!

you want to talk about wrong!?! wow!! now that was wrong. so i see you fellas are up to the same things asusal!!
01-31-2006, 02:01 PM
PawnShopCEO

i dont get it... i dont see anything...

dont make me break out your elementary school pictures again there craftyson
01-31-2006, 02:28 PM
BCRAFTY

shut up wallace
02-01-2006, 12:36 PM
BCRAFTY

I just wanted to let everyone know that i'm not racing anyone anymore.. I guess the truth is that my car is slow and there is no point in trying if i'm just going to get beat... :surrender
02-01-2006, 02:08 PM
Speedm0(\)key

Quote:

Originally Posted by BCRAFTY

I just wanted to let everyone know that i'm not racing anyone anymore.. I guess the truth is that my car is slow and there is no point in trying if i'm just going to get beat... :surrender

aww.. thats cute
02-01-2006, 04:02 PM
SMOKENU

Quote:

Originally Posted by BCRAFTY

I just wanted to let everyone know that i'm not racing anyone anymore.. I guess the truth is that my car is slow and there is no point in trying if i'm just going to get beat... :surrender

I agree. :goodjob: Nothing like getting out run by a honda civic to do that to a man.
02-01-2006, 05:04 PM
BCRAFTY

Quote:

Originally Posted by SMOKENU

I agree. :goodjob: Nothing like getting out ran by a honda civic to do that to a man at least thats what happen to me.

:rolleyes: i just read your quote :lmfao: thats funny.. matt i didn't know your car was that slow...

Show 100 post(s) from this thread on one page