will my slips do? you'd know it's me by the shitty 1/4 mileOriginally Posted by 1439/2000
will my slips do? you'd know it's me by the shitty 1/4 mile
where did i "brag" one bit? You the one in lilburn going PSSTTTT leaving bambinelli's one night a few weeks ago?
Nope, I've never been out that way.
The way you presented your video made it seem as if you were bragging...
That wont do. Cause it could be anbody withs slicks. 1.8 is like a good rwd launch and a decent awd launch.will my slips do? you'd know it's me by the shitty 1/4 mile
why don't both off yall go settle it this week...I love tegs (not because I own one) but have seen some fast nissans, but havent really seen any nissan beat a teg on street i.e. 240s, 300zx, etc. I was on 85N last night and this damn white nissan 240 with a S14 conversion I believe kept trying to race me so we just dropped one time and all I seen was his headlights. Not bragging but with the vid speedminded posted I don't think he was braggin, think he was stating his point because he said the guys kept saying he took off early when its just a bunch of sad ass excuses for a soar looser.
I'm not serious, it isn't worth my time or gas.
I'd beat him pretty bad (no offense).
what's your times? Why don't you run commerce friday?
13.5@106
And I've trapped higher then 108.
Commerce is far away. Plus apparently I won't pass tech there.
lol, why the fuck you want to run me? Let me put a small turbo on with stock internals running about 5psi then we'd be about even. (oh, can't forget a deckplate since i'm 11.8:1)
Why wouldn't you pass tech? For those times you just need a battery tie down, seatbelt, and helmet right?
I relocated my battery and was told because I no kill switch I wouldn't pass..
Which is retarded if its true.
you want one?
How much?
hehe, would the nismo gods make it rain hardbody's on me if i got you the old one off one of the honda challenge cars? Were using plastic ones forever but recently put on the all metal version so i'm sure there are a couple laying around somewhere...
Hmm well if you happen to find one, lemme know. I could always use one.
just called the shop, still got them there and my goddamn rotors from AP Racing still aren't in and J3 Racing hasn't fabricated my hats either....I'm never going to have Porsche brakes at this rate!
I think the switch can't be plastic either. Commerce sucks anyway, we should all go to Montgomery or at least silver dollar. Better tracks!
But if they are all metal, I'll take one too!
And I know that halfbaked would win that race...what is it with you turbo guys trying to pick on us all motor guys (mildly built all motor at that)?I'd think that if either of us run 5-7 psi, it would be very close with slicks...
But I'll have to admit that I'm also skeptical on the 1.8 60' with a FWD and street tires. Even with drag radials. Not trying to hate...but that's EXTREMELY impressive if legit!
Formerly Daily Interlude
I didn't like montgomerys track really..
However they didn't do any sort of tech inspection what so ever that I noticed at least..
Really, when I went there...I did 3 tenths better in my street trim (had full interior vs only driver seat, had full trunk stereo setup, and had 16" rims vs stock 14's) and that's when I missed 4th all back in my old 91 Prelude!
Formerly Daily Interlude
never seen any rules on what material the handle could be made out of....say if there was a fire hot enough to melt the switch then it's wayyy too late to worry about cutting the power anyways. Someone let me know.I think the switch can't be plastic either. Commerce sucks anyway, we should all go to Montgomery or at least silver dollar. Better tracks!
But if they are all metal, I'll take one too!
And I know that halfbaked would win that race...what is it with you turbo guys trying to pick on us all motor guys (mildly built all motor at that)?
But I'll have to admit that I'm also skeptical on the 1.8 60' with a FWD and street tires. Even with drag radials. Not trying to hate...but that's EXTREMELY impressive if legit!
What's the weight balance of your car? you never want to add weight in the back of a fwd car...on my launchs i'd always squat the rear using the e-brake and just as the light is turning green i'll release it pushing a little weight towards the front...or that's what always worked for me anyways.
now you guys are gonna make me go home and locate my box of slips...back to my 11.2@122 triumph daytona 955i days..yeah, 4 tenths slower than stock because i had extra teeth on the sprocket giving me 25lbs more torque but less topend
I have never seen a honda beat a nissan on the street. And what the hell is an s14 conversion? Thats like saying a 93 civic had an eg conversion.
You don't know much about cars.
Anyway speedminded,
1.8 60fts are fast. We should race from a dig.
I know marshall was there in the 240 and erin too when i was runnin 1.8...i'll find the slips, it's just going to take hours and hours since i've moved twice since i last saw them.
Ehhh I know Erin. If he posts it up then I'll believe it. I just dont know you.
I'm pretty sure it says it. I did some researching though I forgot where I saw it.never seen any rules on what material the handle could be made out of....say if there was a fire hot enough to melt the switch then it's wayyy too late to worry about cutting the power anyways. Someone let me know.
What's the weight balance of your car? you never want to add weight in the back of a fwd car...on my launchs i'd always squat the rear using the e-brake and just as the light is turning green i'll release it pushing a little weight towards the front...or that's what always worked for me anyways.
now you guys are gonna make me go home and locate my box of slips...back to my 11.2@122 triumph daytona 955i days..yeah, 4 tenths slower than stock because i had extra teeth on the sprocket giving me 25lbs more torque but less topend
For the weights, well, I was meaning for like autocross, road racing, or mountain runs.
Formerly Daily Interlude
SpeedMinded, all I'm asking is All-Motor Vs. All-Motor .. that's all
LS/VTEC W/O spray in a CRX vs. a DC2 w/ a stock b18c5? ok, that's sounds like a relatively good run...i know a 1st gen crx, i think 400 lbs lighter, with a strong b16 is about even. You still have quite a bit of a weight advantage though.SpeedMinded, all I'm asking is All-Motor Vs. All-Motor .. that's all
Nice kill..
I Raced a GSR and an LS with my stock SpecV.
LS I pulled 1 1/2 cars right away from about 50 and up... GSR Stayed even till about 70 from a a 50 mph roll, after that I Started pulling away.. and away and away.
Stock peace of shit slow Specv
Mine weighs in at 2240 @ Silver Dollar. My buddies LS Teg weighed in at 2700, so I suppose you'll be some where around there
Alright Jason... when we gonna get a go??? oh yeah.. when i have a car that uns right.... lol
02' Miata
Yeah not too big on streets unless people really get on my nerves. I don't usually have cars trying to race me for some reason but anyways I run the JWT program ECU for my setup and yeah it's been on the dyno and it was probably 8 months ago which I put down 235WHP 245TQ @ 11psi. Right now I pumped the boost up and bit and changed to a 3" mandrel bend downpipe so I don't know what kind of numbers I'm putting down at the moment. Either way whenever we have an SR20VE sentra around the streets you should give it a run. I think it would make a really cool race. NA vs NA that is.
"If you want peace, prepare for war"
i told you, i'll disconnect one of my plug wires and run you
^lol
Nice video!
What kind of exhaust you have now?
---------------------
lol, or the lack of. Wrapped 4 to 1 header, stock cat, then a stainless pipe & high flow resonator behind it...that's it. Got a flange and turn down i need to weld together so it can eventually be my weekend setup (track & runs)...it's deep but wayyy too loud for daily driving. huhhh, whajj you say?!
I'm looking for a Fujitsubo RM01A.
you're my hero.
Does any shop around here distribute fujitsubo parts or is it back to ebay?
Not sure around here but passwordjdm has one...
http://www.passwordjdm.com/product.a...numLanguageID=
$824 though!
Formerly Daily Interlude
passwordjdm has a complete setup used for $500 but shipping is gonna rape me. i'm thinking about doing an all custom pipe from the header back and just buying the muffler then weld on some hooks and make the fujitsubo can a slipon.
\/ \/ \/ \/
Where did you see 500?Not sure around here but passwordjdm has one...
http://www.passwordjdm.com/product.a...numLanguageID=
$824 though!
Formerly Daily Interlude
dunno, saw it last week...may have been another similiar site but pretty sure it was password jdm since i'm always checking out their garage sales.
*edit* you know what, maybe it was aj-racing? dunno, can't access their site from here....
speakin of password and aj-racing, how come they don't sell that jdm tear drop decal no more? I'm looking for that
Posting Permissions
Reply With Quote
