New moderator announcement...

[NEMO]

its like this man,it dont matter what u got if you dont know how to use it. speakin on your awesome dyno session, I heard on the simulator that someone else was able to get your car down to a 14.2 and your best was a 14.9 i am not gonna just blast you and say you cant drive. I will leave that to everyone else on IA. I actually think we would be a good race at Reynolds.let me know when your going next. I will hopefully have some better axles that the crappy ones from OReilly.

dont blame anything on the axles. i know couple guys running autozone axles that are pushing over 400whp with no problems with the axles

[thundercatz1]

dont blame anything on the axles. i know couple guys running autozone axles that are pushing over 400whp with no problems with the axles

He's tryna make up an excuse for when he loses thats all lolol

[gforce71]

dont blame anything on the axles. i know couple guys running autozone axles that are pushing over 400whp with no problems with the axles

I run stage 2 napa axles lifetime warranty FTW!

[Apex1972]

I run stage 2 napa axles lifetime warranty FTW!

NAPA really has stage 2? didnt know that.I might have to check on those before Friday..

[Apex1972]

dont blame anything on the axles. i know couple guys running autozone axles that are pushing over 400whp with no problems with the axles

well after having many sets from oreilly some are fine at first and some like the set I have right now vibrate from the get go. I will still run ya C I aint fuckin scared,my shits broke at the track before. but for real honda axles suck. DSS suck too. How does one break a 400whp axle with only 250whp???? not mine someone else. I think I am gonna try either remans from Honda next time or there is also a place in Buford Ga that I found recently.anyone know anything about these guys?http://www.cvsource.com/index.html

[Motivation]

well after having many sets from oreilly some are fine at first and some like the set I have right now vibrate from the get go. I will still run ya C I aint fuckin scared,my shits broke at the track before. but for real honda axles suck. DSS suck too. How does one break a 400whp axle with only 250whp???? not mine someone else. I think I am gonna try either remans from Honda next time or there is also a place in Buford Ga that I found recently.anyone know anything about these guys?http://www.cvsource.com/index.html

Doesn't all depends on the horsepower rating of an axle. You have many other factors. Wheel hop, angle of axles, having a good amount of torque and not preloading (especially on slicks), etc...