KILLS FORUM DYNO CHALLENGE!!!

Printable View

Show 100 post(s) from this thread on one page

07-06-2009, 09:02 PM
gastroker

You talking about in the competition forum?
I posted it in there a couple weeks ago but its not updated yet. I wont be number 1 though. There's a few 8 sec Supras ahead of me.
07-07-2009, 08:11 AM
Evolunchbox

Quote:

Originally Posted by gastroker

Sup big man! I have a big race in August in Ohio. As long as it holds together, I'll be at the dyno event for sure. I'd be glad to support Turbo Dave, you guys have always been super cool with me. What brand dyno is it if you don't mind me asking?

BTW, after that last time we talked in Steele, I put the stock shifter back in and went 9.4 in FLA and got booted after my first pass. Once I get it dialed in, I may go back to the sequential. My fuel pump died this past Friday while I was loading it onto the trailer to head to Reynolds for some TNT. I was sooo pissed. I'll have another one in a couple weeks.

Are you going to the DSM/EVO Shootout? If so, we have a couple people including myself, that will be attending. Let me know:cheers:
07-07-2009, 08:36 AM
Incontt

Quote:

Originally Posted by gastroker

You talking about in the competition forum?
I posted it in there a couple weeks ago but its not updated yet. I wont be number 1 though. There's a few 8 sec Supras ahead of me.

Aaron musta missed your post then. Clark didnt post his time in there so you would still be #1
07-07-2009, 08:38 AM
The Ren

If and only IF I can get my car fixed by then im up for it
07-07-2009, 09:32 AM
Incontt

Cool...should be a big turnout... I may be the lone domestic
07-18-2009, 11:28 AM
IMPULSe04LSx

I would like to go but I am not boosted Its all N/A 04 GTO...I haven't dynod yet but free pulls would be nice!! What I currently have is LS6 HEADS/CAMMED/Ls6Intake/Headers/UD pulley/Intake/Dual Borla Exhaust Straight/LS6 clutch.. So who knows what I'll make? I know for SURE it wont be in 600-700whp but hey if you guys let me, I wouldn't mind participating!:D
07-18-2009, 12:44 PM
onebadgt

Quote:

Originally Posted by IMPULSe04LSx

I would like to go but I am not boosted Its all N/A 04 GTO...I haven't dynod yet but free pulls would be nice!! What I currently have is LS6 HEADS/CAMMED/Ls6Intake/Headers/UD pulley/Intake/Dual Borla Exhaust Straight/LS6 clutch.. So who knows what I'll make? I know for SURE it wont be in 600-700whp but hey if you guys let me, I wouldn't mind participating!:D

depending on your h/c specs most make in the 450-500rwhp area so im sure youll be somewhere in that area. i may attend this as well.
07-18-2009, 06:54 PM
Evil Goat

Quote:

Originally Posted by Incontt

Cool...should be a big turnout... I may be the lone domestic

im going to look at the calendar at work and see if i can make it, it's nothing like some of you guys but should be in the mid to high 500's
07-18-2009, 11:38 PM
NevrNufTorq

Quote:

Originally Posted by onebadgt

depending on your h/c specs most make in the 450-500rwhp area so im sure youll be somewhere in that area. i may attend this as well.

not unless there's one SERIOUS port job in those ls6 heads and it'd have to have a bada$$ cam/tune to go with it. those are just the heads off a 02-04 c5 vette. great heads but not all that jazzy w/o some real real massaging on a c n c mill and prob have to have bigger valves too. ls2 heads flow more than these in any stock form :2cents:

with a great tune prob put in the neighborhood of 380-410 if you get some longtubes imho :goodjob:
07-19-2009, 12:16 AM
onebadgt

whoops just re-read the mod list. i though he had ported heads, not stock ls6 heads. now i lower my numbers to 400-430rwhp. there are many cam onlys in that area with a large enough cam!
07-19-2009, 12:17 AM
onebadgt

whoops just re-read the mod list. i though he had ported heads, not stock ls6 heads. now i lower my numbers to 400-430rwhp. there are many cam onlys in that area with a large enough cam!
07-19-2009, 02:22 PM
IMPULSe04LSx

Quote:

Originally Posted by NevrNufTorq

not unless there's one SERIOUS port job in those ls6 heads and it'd have to have a bada$$ cam/tune to go with it. those are just the heads off a 02-04 c5 vette. great heads but not all that jazzy w/o some real real massaging on a c n c mill and prob have to have bigger valves too. ls2 heads flow more than these in any stock form :2cents:

with a great tune prob put in the neighborhood of 380-410 if you get some longtubes imho :goodjob:

I thought the LS6 heads were also known as 243 heads which is on my car? Its the same heads on the LS2 engines that come in the 05/06 GTO (which is one of the main reasons why the 05/06 have the higher 50hp besides 6.0L right?)...and if i missed the longtubes part, I also have that installed.. sorry bout that..
07-19-2009, 02:25 PM
IMPULSe04LSx

Quote:

Originally Posted by onebadgt

whoops just re-read the mod list. i though he had ported heads, not stock ls6 heads. now i lower my numbers to 400-430rwhp. there are many cam onlys in that area with a large enough cam!

Haha yeaa.. I was told in the range of 410-450whp depending on the conditions and what not...But I guess I'll find out soon... When is the tunerfest happening??
07-19-2009, 02:40 PM
BAD SS

What's the payout for the highest horsepower?

:ninja:
07-20-2009, 08:10 PM
gastroker

Quote:

Originally Posted by Evolunchbox

Are you going to the DSM/EVO Shootout? If so, we have a couple people including myself, that will be attending. Let me know:cheers:

Yes sir! We're staying at the Econolodge. We have a group of about 10 going. We are leaving on Friday morning, racing on Sunday, going to Cedar Point on Monday, and coming home Tuesday. This will be my 4th year going.:bump:

Sorry for jacking the thread. We'll take the rest to pm's.
07-21-2009, 12:34 AM
UpSideDownDesi

In line, no big power, but will be fun.
07-21-2009, 01:36 PM
Evil Goat

it's official...i will be there!

looking forward to putting some faces with the names
07-22-2009, 03:27 PM
Paul

Quote:

Originally Posted by Evil Goat

it's official...i will be there!

looking forward to putting some faces with the names

I will be contacting a few of you for Names/Make/Model info... dyno is good for 1200hp. bring ID b/c i'm only putting a few people on the list everyone else is first come first serve so be there early :goodjob:

did i mention cash prizes? i have to think of classes for dyno comp :thinking:
07-24-2009, 07:18 PM
fade2blk500

Hell, I'll take a spot on the dyno. I doubt my car will do much more than 500whp though.
07-26-2009, 06:29 PM
quicksix

I don't make much power put I would love to get in some free pulls. I make around 400hp/500tq.
08-02-2009, 06:07 PM
B18c1Turboed

I know of a certain supra that will be going also. Im sure it will hit that 1200hp mark and then some.... :)
08-04-2009, 09:56 PM
Quicksilverado

My junk is so weak the dyno won't read it correctly. I will be in attendance though.
08-16-2009, 11:29 AM
Boostfed

Im sure matts car will be there...but like bandit said ,it will not even turn the rollers....should be fun trying..:bump:
08-19-2009, 05:50 PM
WickedIXMR

Is there still any spots available? I'd like to dyno my car to see what it would put down.
09-12-2009, 08:55 PM
JJSPEC Racing

Dont laugh when I throw the 1.6 Single Cam on it, lol!(It does ok at the strip)

Show 100 post(s) from this thread on one page