Page 7 of 8 FirstFirst ... 345678 LastLast
Results 241 to 280 of 288

Thread: Attn: N/A 4 and 6cyl Callout version 2.0

  1. #241
    Add-Water-Mod TheSnail's Avatar
    Join Date
    Mar 2005
    Location
    Marryetah
    Age
    44
    Posts
    16,476
    Rep Power
    39

    Default

    Quote Originally Posted by blackshine007
    Even if the K is done right, look at how much money you have to spend to make the power. I don't see how anyone can or would brag about spend well over $12k to brag about a car that only makes 200 or so whp. You show me where that makes any type of sense. In the same car, I'll drop a V6 in it and make even more power for way less. for the same amount of money, I'll make it awd with a turbo set up. And maybe fix up the inside. With a decent paint job. The K swap is only for retards and fan boys, point blank. For that money, I'll have a 626 that will put buslengths on a K swap, hands down. That's my that actually makes sense.

    Damn that k series stuff is alot more expensive then I thought it was!

    The set up I have cost

    Sr20ve complete front clip including everything even the fuel pump for $1000
    N1 cams $650
    Chipped ecu $230
    UR pully $150
    10lb flywheel $250
    Custom intake with velocity stack $100
    Aeromotive FPR $150
    Exedy Stage1 clutch $280

    Thats 200whp for $2810 including the motor. But now prices on the cams alone dropped almost $200 from when I bought them. That and assuming counting in clutches as part of cost/hp figures etc. Rather than playing with just simple bolt-ons, there are so many available options after this point, AEM stand alone, itbs, 12.5:1 cr, 2.3L stoker etc. But if you're talking 200whp, I would guess now days, it would cost $2500 including the motor and a fresh clutch.

  2. #242
    Add-Water-Mod TheSnail's Avatar
    Join Date
    Mar 2005
    Location
    Marryetah
    Age
    44
    Posts
    16,476
    Rep Power
    39

    Default

    Forgot the crap ssac header for $110 and the exhaust for about $300 so that jumps to $3220 for me and 2900ish for nowdays.

  3. #243
    Cruzan Boy Siverprobegt's Avatar
    Join Date
    Oct 2005
    Location
    ga/VI BREED
    Age
    48
    Posts
    663
    Rep Power
    21

    Default

    Quote Originally Posted by TheSnail
    Forgot the crap ssac header for $110 and the exhaust for about $300 so that jumps to $3220 for me and 2900ish for nowdays.

    Not bad..

    92 mx3

  4. #244
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    i wont even go into whats done to my car to much shit to list lol but it does what it does for whats done to it. I just need to work out the bugs on the suspension setup and it'll be good to go
    Soon!!

  5. #245
    time for the build! jerseyef9's Avatar
    Join Date
    Jan 2007
    Location
    SOUTHSIDE
    Age
    37
    Posts
    960
    Rep Power
    19

    Default

    Quote Originally Posted by allmotorX
    i wont even go into whats done to my car to much shit to list lol but it does what it does for whats done to it. I just need to work out the bugs on the suspension setup and it'll be good to go
    you got some work to do indeed my freind
    R.I.P Booga
    M.A.P
    F.D.L.R


  6. #246
    Speical R
    Join Date
    Dec 2008
    Age
    92
    Posts
    341
    Rep Power
    17

    Default

    Quote Originally Posted by Siverprobegt
    Thats very true

  7. #247
    IA Member
    Join Date
    Mar 2008
    Age
    45
    Posts
    52
    Rep Power
    18

    Default

    Quote Originally Posted by blackshine007
    Even if the K is done right, look at how much money you have to spend to make the power. I don't see how anyone can or would brag about spend well over $12k to brag about a car that only makes 200 or so whp. You show me where that makes any type of sense. In the same car, I'll drop a V6 in it and make even more power for way less. for the same amount of money, I'll make it awd with a turbo set up. And maybe fix up the inside. With a decent paint job. The K swap is only for retards and fan boys, point blank. For that money, I'll have a 626 that will put buslengths on a K swap, hands down. That's my that actually makes sense.
    So what do you drive? I did not spend NEAR that. My phone number is 270-881-8151. You talk mad shit let's see if you are man enough to hit me up. I have a camera will get someone to ride with me and tape. I am tired of all this hater shit talking about K SERIES. I'll start with you then see if anybody else wants some or if people are too scared to get their feelings hurt and head busted. I'll be waiting.....

  8. #248
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by 94ex-vtec
    So what do you drive? I did not spend NEAR that. My phone number is 270-881-8151. You talk mad shit let's see if you are man enough to hit me up. I have a camera will get someone to ride with me and tape. I am tired of all this hater shit talking about K SERIES. I'll start with you then see if anybody else wants some or if people are too scared to get their feelings hurt and head busted. I'll be waiting.....
    Looks like we have a call out lol i wanna see this
    Soon!!

  9. #249
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by 94ex-vtec
    So what do you drive? I did not spend NEAR that. My phone number is 270-881-8151. You talk mad shit let's see if you are man enough to hit me up. I have a camera will get someone to ride with me and tape. I am tired of all this hater shit talking about K SERIES. I'll start with you then see if anybody else wants some or if people are too scared to get their feelings hurt and head busted. I'll be waiting.....
    I'm not talking shit, I'm talking truth. There's a difference. Talking shit would be to blow something way over proportion between to sides that couldn't come into an agreement. It's widely agreeable that the K series is too expensive to play. I never said it's a bad motor. I think it's a damn good motor. But to spend anywhere near the money that it takes to get one running is just unheard of.

    If you don't know what I drive, try reading the post a second time. But even then, If I were to run you, you'd just drag me down the road by my balls with no contest so there's no point in running you. My engine only has I/H/E which only cost me a total of $1500 and that's including the engine, 4 transmissions I've bought for it, the light weight flywheel and the chip.
    Quote Originally Posted by blackshine007
    The K swap is only for retards and fan boys, point blank.
    You sir make a good point REPS to you, kind sir

    EDIT:You wanna run an old Volvo?

    K series 626. That's right. It's got a K in it.

  10. #250
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by blackshine007
    I'm not talking shit, I'm talking truth. There's a difference. Talking shit would be to blow something way over proportion between to sides that couldn't come into an agreement. It's widely agreeable that the K series is too expensive to play. I never said it's a bad motor. I think it's a damn good motor. But to spend anywhere near the money that it takes to get one running is just unheard of.

    If you don't know what I drive, try reading the post a second time. But even then, If I were to run you, you'd just drag me down the road by my balls with no contest so there's no point in running you. My engine only has I/H/E which only cost me a total of $1500 and that's including the engine, 4 transmissions I've bought for it, the light weight flywheel and the chip.

    You sir make a good point REPS to you, kind sir
    lol
    Soon!!

  11. #251
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    Quote Originally Posted by blackshine007
    Even if the K is done right, look at how much money you have to spend to make the power. I don't see how anyone can or would brag about spend well over $12k to brag about a car that only makes 200 or so whp. You show me where that makes any type of sense. In the same car, I'll drop a V6 in it and make even more power for way less. for the same amount of money, I'll make it awd with a turbo set up. And maybe fix up the inside. With a decent paint job. The K swap is only for retards and fan boys, point blank. For that money, I'll have a 626 that will put buslengths on a K swap, hands down. That's my that actually makes sense.
    Video's or it didn't or possibly wont happen

    I keed I keed


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  12. #252
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by EJ1soSlo
    Video's or it didn't or possibly wont happen

    I keed I keed
    lol go play nintendo this is a grown mans thread mofo
    Soon!!

  13. #253
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    Quote Originally Posted by allmotorX
    lol go play nintendo this is a grown mans thread mofo
    it's PS3 pawnk beasshhhh like the one you still have oh yea I'll be back sooner than expected


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  14. #254
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by EJ1soSlo
    it's PS3 pawnk beasshhhh like the one you still have oh yea I'll be back sooner than expected
    i dont expect you to ever over back lol hurry up the game been missing you muther cruncher i need some competition shoeshine007 aint nothing to play around with anymore
    Soon!!

  15. #255
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by allmotorX
    i dont expect you to ever over back lol hurry up the game been missing you muther cruncher i need some competition shoeshine007 aint nothing to play around with anymore
    Keep on...... I might upgrade on ya

    K series 626. That's right. It's got a K in it.

  16. #256
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by blackshine007
    Keep on...... I might upgrade on ya
    upgrade to what you already sold ya bottle you dont have nothin lol
    Soon!!

  17. #257
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    Quote Originally Posted by blackshine007
    Keep on...... I might upgrade on ya
    lol and we can get that run in. I didn't change anything but the valves that bent


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  18. #258
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by allmotorX
    upgrade to what you already sold ya bottle you dont have nothin lol
    Oh, I have options, buddy...... I have options.....
    http://www.youtube.com/watch?v=AACd9YZlh5E

    K series 626. That's right. It's got a K in it.

  19. #259
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by blackshine007
    Oh, I have options, buddy...... I have options.....
    http://www.youtube.com/watch?v=AACd9YZlh5E
    first off ya car weighs 6millions pounds with your tools second where the hell you going to get itbs at home depot dont make me take out the driver seat then ill weigh lil to nothing
    Soon!!

  20. #260
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by EJ1soSlo
    lol and we can get that run in. I didn't change anything but the valves that bent
    so when you gone be back on the road again officially
    Soon!!

  21. #261
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    Quote Originally Posted by allmotorX
    so when you gone be back on the road again officially
    I'm not sure i think I'm going to be able to valves off the guy next week and I do all the work myself but not sure. I need to make sure that I get a timing belt cover to make sure that this sheeeeet never happens again.


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  22. #262
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by allmotorX
    first off ya car weighs 6millions pounds with your tools second where the hell you going to get itbs at home depot dont make me take out the driver seat then ill weigh lil to nothing
    Hell, the driver seat is the only keeping your car from being blown away by the wind as light as that thing is. That's the only car I know of that you have to tie it down to keep it from floating away..... I took a pic of it too

    K series 626. That's right. It's got a K in it.

  23. #263
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by blackshine007
    Hell, the driver seat is the only keeping your car from being blown away by the wind as light as that thing is. That's the only car I know of that you have to tie it down to keep it from floating away..... I took a pic of it too
    lmao damn you must took that one while i wasnt looking
    Soon!!

  24. #264
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by EJ1soSlo
    I'm not sure i think I'm going to be able to valves off the guy next week and I do all the work myself but not sure. I need to make sure that I get a timing belt cover to make sure that this sheeeeet never happens again.
    i feel ya well ill be waiting on ya
    Soon!!

  25. #265
    Cruzan Boy Siverprobegt's Avatar
    Join Date
    Oct 2005
    Location
    ga/VI BREED
    Age
    48
    Posts
    663
    Rep Power
    21

    Default

    Quote Originally Posted by allmotorX
    first off ya car weighs 6millions pounds with your tools second where the hell you going to get itbs at home depot dont make me take out the driver seat then ill weigh lil to nothing
    Those itb's came from a motorbike .That's only 255hp

    92 mx3

  26. #266
    IA Member
    Join Date
    Mar 2008
    Age
    45
    Posts
    52
    Rep Power
    18

    Default

    Quote Originally Posted by blackshine007
    I'm not talking shit, I'm talking truth. There's a difference. Talking shit would be to blow something way over proportion between to sides that couldn't come into an agreement. It's widely agreeable that the K series is too expensive to play. I never said it's a bad motor. I think it's a damn good motor. But to spend anywhere near the money that it takes to get one running is just unheard of.

    If you don't know what I drive, try reading the post a second time. But even then, If I were to run you, you'd just drag me down the road by my balls with no contest so there's no point in running you. My engine only has I/H/E which only cost me a total of $1500 and that's including the engine, 4 transmissions I've bought for it, the light weight flywheel and the chip.

    You sir make a good point REPS to you, kind sir

    EDIT:You wanna run an old Volvo?
    Exactly what I thought ridiculous Internet shit talking. You build a 626 for $12k that can outrun a k setup I could do for $12k and I will PERSONALLY reimburse you, hell even better I would run for pinks and give you my car if I lost. Anyways........Volvo sure I will run it......If it's some nasty setup pushing a lot of up and it waxes me oh well there will ALWAYS be a faster car around. So yeah I'll run it just let me know.

    And yes I can read and did read that you drive a 626, which is exactly why I asked for clarification.

    I am not even gonna waste time on explanations of why a k swap is a good option over others.

    Just gonna go make my own thread and see who actually HAS a car that's worth running instead of someone just bashing shit you have no clue about. You acuse me of being a "retard and fan boy". Well first retard is not a word to be used lightly by anyone. I know several mentally handicapped people personally and we'll just leave it at that. Fan boy....... Not at all..... Just was at a fork in the road with my cars direction and opted for the one with the most reliability and best technology. And for the record being a " k series basher " is a big a fanboy as anyone else.

    I must say the stuff you say is SO ridiculous that I may consider reading this thread with more of your posts so I can get a daily laugh

  27. #267
    530TQ + FWD = FAIL!! Kason23's Avatar
    Join Date
    Jan 2007
    Location
    Rockmart
    Age
    43
    Posts
    582
    Rep Power
    19

    Default

    Quote Originally Posted by 94ex-vtec
    Exactly what I thought ridiculous Internet shit talking. You build a 626 for $12k that can outrun a k setup I could do for $12k and I will PERSONALLY reimburse you, hell even better I would run for pinks and give you my car if I lost. Anyways........Volvo sure I will run it......If it's some nasty setup pushing a lot of up and it waxes me oh well there will ALWAYS be a faster car around. So yeah I'll run it just let me know.

    And yes I can read and did read that you drive a 626, which is exactly why I asked for clarification.

    I am not even gonna waste time on explanations of why a k swap is a good option over others.

    Just gonna go make my own thread and see who actually HAS a car that's worth running instead of someone just bashing shit you have no clue about. You acuse me of being a "retard and fan boy". Well first retard is not a word to be used lightly by anyone. I know several mentally handicapped people personally and we'll just leave it at that. Fan boy....... Not at all..... Just was at a fork in the road with my cars direction and opted for the one with the most reliability and best technology. And for the record being a " k series basher " is a big a fanboy as anyone else.

    I must say the stuff you say is SO ridiculous that I may consider reading this thread with more of your posts so I can get a daily laugh

    To each there own. K swaps are no F*cking joke. But imo a nicely setup B series swap is good also. Not knocking your setup at all if you got the funds and time...more power to you!!

    So Reps to you good sir !!!
    Neon PoWa
    Now Delta 46 equipped
    432whp/425wtq on lower boost

  28. #268
    Add-Water-Mod TheSnail's Avatar
    Join Date
    Mar 2005
    Location
    Marryetah
    Age
    44
    Posts
    16,476
    Rep Power
    39

    Default

    I think alot of the price has to do with hype and availibility. There is by far a shit ton more parts availive for the k20 then a ve, but those manufactures look for market and its demand. As an analogy, I would say its basically a comparison of moonshine and vodka. Both will fuck you up equally, but the moonshine would cost less. But after demand, the manufactures of parts will follow.

  29. #269
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by TheSnail
    I think alot of the price has to do with hype and availibility. There is by far a shit ton more parts availive for the k20 then a ve, but those manufactures look for market and its demand. As an analogy, I would say its basically a comparison of moonshine and vodka. B16a will fuck you up equally, but the moonshine would cost less. But after demand, the manufactures of parts will follow.
    Soon!!

  30. #270
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by 94ex-vtec
    Exactly what I thought ridiculous Internet shit talking. You build a 626 for $12k that can outrun a k setup I could do for $12k and I will PERSONALLY reimburse you, hell even better I would run for pinks and give you my car if I lost. Anyways........Volvo sure I will run it......If it's some nasty setup pushing a lot of up and it waxes me oh well there will ALWAYS be a faster car around. So yeah I'll run it just let me know.

    And yes I can read and did read that you drive a 626, which is exactly why I asked for clarification.

    I am not even gonna waste time on explanations of why a k swap is a good option over others.

    Just gonna go make my own thread and see who actually HAS a car that's worth running instead of someone just bashing shit you have no clue about. You acuse me of being a "retard and fan boy". Well first retard is not a word to be used lightly by anyone. I know several mentally handicapped people personally and we'll just leave it at that. Fan boy....... Not at all..... Just was at a fork in the road with my cars direction and opted for the one with the most reliability and best technology. And for the record being a " k series basher " is a big a fanboy as anyone else.

    I must say the stuff you say is SO ridiculous that I may consider reading this thread with more of your posts so I can get a daily laugh
    Well, sir, contrary to popular belief, you can do more to a 626 than just throw an intake on it. I can assure you that "IF" I were to build a car up with a 12K investment, the total money investment will show moreso on mine vs. yours. Let's get it straight, I know that the motor flows very well stock, way more than the best ported B series. I know that a 75 shot with tuning can add more than 100 + whp. I know that the synchros are weak on 2nd and 3rd but the tranny can take more power than any B series. I know more than you think about the K series. I'm impressed about it, honestly. But for the money you invested in your K series, my K series (V6) would be very healthy. And faster. But I haven't, nor do I plan on doing it. You foolishly invest into your car. I invest into my family. My house. My other 2 vehicles. If you beat me, you just beat a family sedan that is slightly faster than stock getting decent gas mileage. If you want a race, I can get you your race. You got your choice between a Volvo or a Triump spitfire. That's on you.

    K series 626. That's right. It's got a K in it.

  31. #271
    Certified Gearhead chunky's Avatar
    Join Date
    Jan 2004
    Location
    atl, GA
    Posts
    385
    Rep Power
    22

    Default

    Quote Originally Posted by 94ex-vtec
    So what do you drive? I did not spend NEAR that. My phone number is 270-881-8151. You talk mad shit let's see if you are man enough to hit me up. I have a camera will get someone to ride with me and tape. I am tired of all this hater shit talking about K SERIES. I'll start with you then see if anybody else wants some or if people are too scared to get their feelings hurt and head busted. I'll be waiting.....
    LOL @ the K-series trash talking in here. 12g on a K-series? LMFAO. I don't have anywhere near that in my K. Hell, even if I paid someone else to do all the labor, I still wouldn't have that much in my motor.

    Whenever you meet up with these bustas to give them some vitamin-K, let me know, I'll roll out too.

  32. #272
    Speical R
    Join Date
    Dec 2008
    Age
    92
    Posts
    341
    Rep Power
    17

    Default

    Quote Originally Posted by chunky
    LOL @ the K-series trash talking in here. 12g on a K-series? LMFAO. I don't have anywhere near that in my K. Hell, even if I paid someone else to do all the labor, I still wouldn't have that much in my motor.

    Whenever you meet up with these bustas to give them some vitamin-K, let me know, I'll roll out too.

    x2..even tho im still working on my k but i'll bring my little vitamin-B

  33. #273
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Damn this thread is getting out of hand
    Soon!!

  34. #274
    IA Member
    Join Date
    Mar 2008
    Age
    45
    Posts
    52
    Rep Power
    18

    Default

    Quote Originally Posted by chunky
    LOL @ the K-series trash talking in here. 12g on a K-series? LMFAO. I don't have anywhere near that in my K. Hell, even if I paid someone else to do all the labor, I still wouldn't have that much in my motor.

    Whenever you meet up with these bustas to give them some vitamin-K, let me know, I'll roll out too.
    will do however i doubt anything will ever happen since it's just internet BS at its finest.

    I dont get on here everyday so whoever wants some just hit me up on my cell number posted above. Some of you seem cool and i would like to run some decent b-series and any h23/h22/f23/ h2b or anything of the sort.

  35. #275
    SLOW DB2 RIDIN DIRTY GaGen2Teg's Avatar
    Join Date
    Sep 2006
    Location
    Cobb/Cherokee County
    Posts
    3,114
    Rep Power
    24

    Default

    Quote Originally Posted by allmotorX
    Damn this thread is getting out of hand
    x2

    went from a call out thread to a k20 thread lol

    you guys make me giggle

  36. #276
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by 94ex-vtec
    will do however i doubt anything will ever happen since it's just internet BS at its finest.

    I dont get on here everyday so whoever wants some just hit me up on my cell number posted above. Some of you seem cool and i would like to run some decent b-series and any h23/h22/f23/ h2b or anything of the sort.
    your n/a am i correct if so where you from ill be glad to get stomped by a Kswap again
    Last edited by allmotorX; 04-05-2009 at 02:40 PM.
    Soon!!

  37. #277
    SLOW DB2 RIDIN DIRTY GaGen2Teg's Avatar
    Join Date
    Sep 2006
    Location
    Cobb/Cherokee County
    Posts
    3,114
    Rep Power
    24

    Default

    Quote Originally Posted by allmotorX
    your n/a am i correct if so where you from ill be glad to get stomped by a swap
    oh i gotta see this

  38. #278
    i have no cup holder LongLiveH2b's Avatar
    Join Date
    Oct 2006
    Location
    Around metro-ATLANTA & IA!!
    Age
    41
    Posts
    2,178
    Rep Power
    23

    Default

    whenever this does happen and if i see you out there, i'll run yah!

    Quote Originally Posted by 94ex-vtec
    will do however i doubt anything will ever happen since it's just internet BS at its finest.

    I dont get on here everyday so whoever wants some just hit me up on my cell number posted above. Some of you seem cool and i would like to run some decent b-series and any h23/h22/f23/ h2b or anything of the sort.

  39. #279
    Out the game again!!
    Join Date
    Oct 2006
    Location
    southside of the border
    Age
    38
    Posts
    3,134
    Rep Power
    23

    Default

    Quote Originally Posted by LongLiveH2b
    whenever this does happen and if i see you out there, i'll run yah!
    I left my bottle in ya car bring it along to
    Soon!!

  40. #280
    Certified Gearhead chunky's Avatar
    Join Date
    Jan 2004
    Location
    atl, GA
    Posts
    385
    Rep Power
    22

    Default

    Quote Originally Posted by 94ex-vtec
    will do however i doubt anything will ever happen since it's just internet BS at its finest.

    I dont get on here everyday so whoever wants some just hit me up on my cell number posted above. Some of you seem cool and i would like to run some decent b-series and any h23/h22/f23/ h2b or anything of the sort.
    haha, yeah internet BS is all it is. I wouldn't mind running some SR20's DE/VE or DET on the stock turbo, maybe even a T28. My buddy sold his DET swapped NX2000 just as I got my car running again so I never got to run him. Maybe some stock or bolton modded V8s just to see where I stand.

Page 7 of 8 FirstFirst ... 345678 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!