when are you finishing that bish? haha.Originally Posted by simontibbett
I got lots of posting to do on mine. Im almost done!!!!
when are you finishing that bish? haha.Originally Posted by simontibbett
I got lots of posting to do on mine. Im almost done!!!!
oh ok cool.. and yea i removed all my shitty a/c and power steering.. that shit jus got in my way.. and my next upgrade should be headers, and suspension.. but not sure on what kind of suspension.. u have any thoughts of wich is best for circuit and street use?Originally Posted by simontibbett
Peek-a-boo mofucka what now?!
@ needing a downhill to hit 140
![]()
lol hey my friend insisted on downhill cause he said he was faster in the downhill.. but its obvious i cant do it on a straight and i dont know if i can or cant havent tried and will not try.. but think about it, i dont have a turbo or supercharger and i am all NA power.. so to me hittin 140+ in a NA is pretty fucking good...Originally Posted by collins
Peek-a-boo mofucka what now?!
i'm NA tooOriginally Posted by driftjunior
![]()
theres a difference between your car and mine.. mine came out the factory with almost no power at all.. and yours came out the factory with a good amount of power.. so you see where im getting now? i have to actually work pretty hard on my car in order to hit those kinds of speeds.. you on the other hand just hit the gas and shift gears and u can hit them unlike me....Originally Posted by collins
Peek-a-boo mofucka what now?!
no i cant do over 110 beacue of fuel cut.....but it deff gets to 100 faster than my RX-7 did
oh ok i see.. take that defenser off.. but u dd urs rite? and sorry to say this.. but u r fucking retarded for selling ur 7!! that shit was clean..Originally Posted by HypnoToad
Peek-a-boo mofucka what now?!
nah i like torque and camaro gets better gas milageOriginally Posted by driftjunior
You are retarded for modding a n/a FCOriginally Posted by driftjunior
![]()
so am i retarded for modding a non-turbo car? same goes for u then.. you retarded for modding a n/a corvette... same drifference i want more power and same goes for you..Originally Posted by LS2_KID
Peek-a-boo mofucka what now?!
Well how about you re-read my post. I said a n/a FC, which does not apply to me in any way. Good try, have fun with those apex seals.Originally Posted by driftjunior
making comparison of modding an n/a FC to an n/a c6...Originally Posted by driftjunior
can i get a facepalm?![]()
That's a dumb comment. Many people mod NA RX-7's..hell in road racing there are NA FD's...you can't call someone stupid for their mods without knowing what the car is used for.Originally Posted by LS2_KID
Well since this thread is about straight line racing, I still stand beside my comment.Originally Posted by simontibbett
driftjunior - Also I have not modded my corvette, so you are also wrong there again my friend.
thank you very much Simon.. these guys have the power in their cars but do you think they can really handle it? like seriously some people just talk alot but then when they hit the track the look like they are hittin banana peels.. why is that?Originally Posted by simontibbett
Peek-a-boo mofucka what now?!
matt, u still got that skivic?
nope. BMWOriginally Posted by collins
well if you want the best, get motons. but because you drive a POS RX7, im sure you dont have that kind of moneyOriginally Posted by driftjunior
get ground control coilovers, koni shocks, and a racing beat front bar with adjustable endlinks
well since my rx7 is such a POS then why dont you buy me those Motons since your so fucking rich bro.. and i have looked into buying coilovers but i have only looked at so many companies, like Tein, Megan Racing, Tokico Blues w/ Racing Beat springs.. and thats about it..Originally Posted by matthewAPM
Peek-a-boo mofucka what now?!
never said i have money. thats why im on TC Kline stuff. if I did, I wouldnt be racing a BMW.Originally Posted by driftjunior
DONT GET THAT SHIT. its will suck. trust me. do what I said. and run no rear bar. sounds dumb but it works.
I make less than 200....stock. i might have 210. but I weigh alotOriginally Posted by driftjunior
Well either way bimmers are pretty expensive.. and give me a site to visit so i can look at everything your telling me about. and someone at Mazmart has told me about removing the rear bar but idk, i havent had alot of seat time to perfect my drivingOriginally Posted by matthewAPM
and your car makes more than mine and mine weighs about 2800lbs.. so think about it again.. y would i race you?
Peek-a-boo mofucka what now?!
Konis and Ground Controls = best bang for the money.
is it really? i dont want to buy something that i will regret later.. can u post a site where i can take a look at some good set ups? and what do u think of polyeruthane bushings? are they any goodOriginally Posted by simontibbett
Peek-a-boo mofucka what now?!
Ground Control coilovers ftw.
Originally Posted by driftjunior
Funny you say that in the OP, but then turn right around and go 125+ mph down 985.....![]()
lol i kno but that was the last time.. havent street raced since forever and i hate doin.. dont like it at all.. next time i will hold my anger in and take it to the track..Originally Posted by AirMax95
Peek-a-boo mofucka what now?!
Smart moveOriginally Posted by driftjunior
![]()
i know.. street racing is for dumasses who rather pay tickets, than being able to double it at the track..Originally Posted by AirMax95
Peek-a-boo mofucka what now?!
anyone wanna ride with me down 575 tonight?lol
lol for what?Originally Posted by HypnoToad
Peek-a-boo mofucka what now?!
cause its lonely out there at night,lol...gotta drive over 100 miles on that road,i hate it so muchOriginally Posted by driftjunior
lol r u scared of driving in the dark or what? oh wait..... are you wanting to race?? lol 1st one to 110 winsOriginally Posted by HypnoToad
Peek-a-boo mofucka what now?!
Yeah but since this guy loves the rotary, I don't see this situation here haha.Originally Posted by Civicn33b
yea because your motor is a POS to me and like mine is to you... so keep your cheap ass engine hahaOriginally Posted by LS2_KID
Peek-a-boo mofucka what now?!
Oh yeah? What is your "reasoning" behind this motor being a POS?Originally Posted by driftjunior
Entertain me, please.Originally Posted by LS2_KID
DriftJunior - ah, has anyone ever told you to just quit being the way you are? It really isn't a good way to be, all retarded and stuff.
I have a hard time understanding what you're trying to say in a lot of your posts as a result of your abhorrent spelling, grammar and sentence structure. Some how you manage to get the words there, kind of, but well - a lot of them are just in the wrong place and it's hard to put them together to form any kind of coherant sentence. I may need my trusty Captain Crunch ring decoder for your posts.
because why would you even think of putting it in my car? that engine is designed for your car not mine. such as my engine is designed for my car not yours.. so why would i need you motor when it would just be a waste of my time and money? there is a reaso why u bought your car and there is a reason why i bought my car.. u love stock power.. and i like to make power out of my stock motor..Originally Posted by LS2_KID
Peek-a-boo mofucka what now?!
pistons motor for our cars are a waste of money.. why do the 4rotor concept corvette that GM did back in the old days... bet u dumasses didnt know about that one.. or how much it cost GM to produce a 4 rotor rotary engine.. or why they did it?Originally Posted by Civicn33b
Peek-a-boo mofucka what now?!