callout Nevrnuftorq at steele

[mike's02ls1]

you know we're going to steele right? thats north of birmingham near gadsden, montgomery is in lower half of the state.....just trying to make sure where you're headed

Oh I thought it was by Montgomery, never been to Steele

[NevrNufTorq]

Oh I thought it was by Montgomery, never been to Steele

nope, northeast part of the state...just thought i'd make sure where you needed to be...gl on getting a tow down there

[SPOOLIN]

steele is where all the cool guys TnT

[Incontt]

steele is where all the cool guys TnT

think they will care if we are there?

[NevrNufTorq]

think they will care if we are there?

[T.S.]

Oh I thought it was by Montgomery, never been to Steele

there is a megasquirt guy in suwanee, just thought i would throw that out there. I know he installs them. I can get you his number if you need me too.

[Incontt]

where is fatboy...prolly feeding his face trying to gain some nutz!!!!!

[Incontt]

if that aint the gayest ricer i have ever seen. I dunno if i can even be in a staging lane next to a homo like that

[Incontt]

i just noticed that big donut on the back left......prolly a thought caption...

[NevrNufTorq]

if that aint the gayes ricer i have ever seen. I dunno if i can even be in a staging lane next to a homo like that

come talk to me when you get your next hair implant!!! dont make me post up the pic of you and your gut on the scooter!!!

[Incontt]

ill bust yo ass in this g-ride. Bring on the riced out poopra!!!!!!

[NevrNufTorq]

[Incontt]

notice the poopra couldnt even pull on the mini-busa!!!!!!!!!!!

[NevrNufTorq]

notice the poopra couldnt even pull on the mini-busa!!!!!!!!!!!

that was the big diesel not the poopra...did you bang your head again???

[Incontt]

my turbo on the left....your import hamster wheel on the right!!!!! I may suck the plastic APC accesories off that turd when i spool up

[NevrNufTorq]

my turbo on the left....your import hamster wheel on the right!!!!! I may suck the plastic APC accesories off that turd when i spool up

thatll make it that much worse when i bust that a$$ on my little hamster wheel and you lose on your big honker!!!

[T.S.]

my turbo on the left....your import hamster wheel on the right!!!!! I may suck the plastic APC accesories off that turd when i spool up

Incontt what size turbo are you running on the mustang??

[Incontt]

EZ94mm billet
408- dart block
powerglide

[onebadgt]

wow, 94mm. that could suck in animals and small children lol! n this is the best thread in a while

[MR.EM1]

this will be worth the 2 1/2 hr drive...im so going

[NevrNufTorq]

wow, 94mm. that could suck in animals and small children lol! n this is the best thread in a while

thats what happened to jerry's hair!!!

[Incontt]

Superado is ready to go!!!!! Left MSS at 8:30pm tonight....next!!

Riceboy, dont make me drag you again!! You beat me to the 1/8 but then I just drove around you!!!

[Hunter02SS]

You guy's are both gay!!!!

When you both are ready to step it up a notch , give me a call in Februaury!
I will be ready! By that time both of you will have probably gone thru another MSS engine swap or repair of some sort!!

[onebadgt]

oh snap. I got $100 says hunter runs at least .5 faster and traps 10mph higher than either!

[NevrNufTorq]

oh snap. I got $100 says hunter runs at least .5 faster and traps 10mph higher than either!

not with a 6speed he wont

[NevrNufTorq]

You guy's are both gay!!!!

When you both are ready to step it up a notch , give me a call in Februaury!
I will be ready! By that time both of you will have probably gone thru another MSS engine swap or repair of some sort!!

whitney wondered where you went and wanted to know why you never came back?!?!?!?

oh yes, we talked to her!!!!!!!!!!!!

how'd you like your little pic

[onebadgt]

not with a 6speed he wont

He had an auto unless he changed it. And I still say he can with a 6speed with a sub 1.7 60ft. But all three cars are awesome

[NevrNufTorq]

He had an auto unless he changed it. And I still say he can with a 6speed with a sub 1.7 60ft. But all three cars are awesome

that car's gone and he's on to a new build and back in a t/a too

drag racing and bangin gears gets very hard to do when you start goin really fast...just unloads the chassis too many times down the track. hunter went a best of i think 10.6 on a 6speed and 9.18 on the auto right out of the box. clark went i think best of 9.8 or 9.7 but could never get really consistent with it. switched to an auto and went 9.10 on his very first pass with the auto and now runs consistent 8.7's or 8.6's with it not saying it cant be done, it's just very hard and even tougher to do it consistently

[Incontt]

You guy's are both gay!!!!

When you both are ready to step it up a notch , give me a call in Februaury!
I will be ready! By that time both of you will have probably gone thru another MSS engine swap or repair of some sort!!

Look Ill drag that truck now on the mini-busa!!!!

Yeah in February I might have hit the lottery. What can you do NOW....nothing. Even Thacker could punk yo ass right now. You go count receipts and we will count timeslips.....well David will.....I'll count how many AAA tows i have left.

[Hunter02SS]

He had an auto unless he changed it. And I still say he can with a 6speed with a sub 1.7 60ft. But all three cars are awesome

Yeah brian, when Jerry posted those 3 turbo's up on the previous page, the big one on the left is mine for my new build! LSX ,427 with 6 bolt head's and a EZ94mm billet turbo! 6 speed for the street and a TH400 for track duty.

[Incontt]

yeah Hunters was the BIG one...mine is the center one which looks so tiny now. We are gonna e-thug Hunter until he gets it going. Right now he is all blah blah blah.

[onebadgt]

Yeah brian, when Jerry posted those 3 turbo's up on the previous page, the big one on the left is mine for my new build! LSX ,427 with 6 bolt head's and a EZ94mm billet turbo! 6 speed for the street and a TH400 for track duty.

holy crap no more 67's looks like the 94mm ate them both lol, should be sick. cant wait to see it alive, you find new ways of makin us jealous all the time lol, but goodluck with the build!

[T.S.]

94mm that is a huge turbo.... when do you hit full boost at 5000rpms?? I kidding... I dont hit full boost till 3700-3800 in my little gt2876

[Incontt]

i bet you mean twins

[NevrNufTorq]

Yeah brian, when Jerry posted those 3 turbo's up on the previous page, the big one on the left is mine for my new build! LSX ,427 with 6 bolt head's and a EZ94mm billet turbo! 6 speed for the street and a TH400 for track duty.

that way his new exscuse can be, wait i need to change my tranny out


just giving you $hit buddy, it'll be the best of both worlds but i bet you'll end up sticking with the 400 once you get a taste of all that power whenever you want and only switch to the 6speed when you go on mtn runs

[Hunter02SS]

that way his new exscuse can be, wait i need to change my tranny out


just giving you $hit buddy, it'll be the best of both worlds but i bet you'll end up sticking with the 40 once you get a taste of all that power whenever you want and only switch to the 6speed when you go on mtn runs

HUH?? I am confused,what is a 40?? A 40oz. beer?
A 400 I am sure you meant!LOL!

[NevrNufTorq]

HUH?? I am confused,what is a 40?? A 40oz. beer?
A 400 I am sure you meant!LOL!

sorry i fixed it, you never did say how you liked your pic?!?!?! :boobies:

[Hunter02SS]

sorry i fixed it, you never did say how you liked your pic?!?!?! :boobies:

LOL, loved it!

[TS240]

Dave me and Ben were talking about this race tonight, this is going to be good!

[NevrNufTorq]

Dave me and Ben were talking about this race tonight, this is going to be good!

gonna be alot of fun regardless of the outcome