Originally Posted by Z U L8R
not fair.
Race me, that might be a bit more fair.![]()
Originally Posted by Z U L8R
not fair.
Race me, that might be a bit more fair.![]()
TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos
idk if that would be fair gor you, that little z is fast as hell, what does your bmw weigh?Originally Posted by RJ's325ITS
2006 mustang gt
gears
bolt-ons
The real question here is how much the Z puts to the wheels??????Originally Posted by onebadgt
![]()
TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos
did you come out to a meet once a few months ago with a bunch of vettes, stangs, viper etc up 75 and run a white all motor ss, and a motor+spray lt1 camaro later that nite?
2006 mustang gt
gears
bolt-ons
n you have a badass bmw but i have a good feelin its more than you.Originally Posted by RJ's325ITS
2006 mustang gt
gears
bolt-ons
Do you want to run an 07 335i? If so I would be up for running.
I want to race a 335..... please bag it TO GO....Originally Posted by Evolunchbox
![]()
I can do pump 10psi...
TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos
Sounds awesome! Lets do this! I am out of town this weekend. How about on a weekday? Next weekend? Let me know!Originally Posted by RJ's325ITS
PM me and we'll work something out.
Originally Posted by Evolunchbox
DUDE CLEAN YOU PM BOX.....
Are you coming out this weekend? are we still doing a pump gas run?
Rafa,
TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos
!Originally Posted by RJ's325ITS
I am coming out for sure.
PM's cleaned up. Thanks!
sounds good m5lite, just shoot me a PM when you guys are ready to meet up.
i only have 60 psi on cylinder 2. after each run you have to let me pull over and add a quart of oil kk thx >_<!!@#!@#!@#!@!
You should rig up an oil line and pump w/ a small resovoir straight to the valve cover with a manual switch insideOriginally Posted by Z U L8R
After you rebuild the engine you can just run the line to the exhaust and have an instant smoke screen![]()
I'll run you at Tunerfest.....![]()
![]()
well as it is, i have oil jets for windshield squirters, so i think the zipties on my piston rings melted, i knew i shouldn't have used those apc zipties... depending on how long the machine shop takes...looks like the yellow z will never be seen again. 1g eclipse gsx coming soon, and the mysterious phantom predicessor to the yellow french's mustard Z shall make it's debut shortly. but when it's all said and done...i'm still slow, and wish i had AC >_<
Zip ties on your piston rings? i woulda at least used metal hose clamps! might have to machine a groove in the cylinder for the clamp & screw to slide up and down in thoughOriginally Posted by Z U L8R
![]()
I think he's scared sure is ignoring your callout![]()
![]()
![]()
Originally Posted by Z U L8R
somewhat confused? is he driving around the r.b Z? or a 1g GSX?Originally Posted by 198plus
dude letse run themI'm on Bf.c all the time are you there...?
Putting in a new HG this week![]()
I'll run my slow, POS EP3 one more time before she gets parked...
K20 with i/h/midpipe/headswap/reflash in a ~3000lb car with me in it
compared to a 170k 325is with a tune intake and cat delete it should be a good run. Would you like to meet up with us when Bannana gets his car going?Originally Posted by KPowerEP3
So far I have...
IntegraXTR
Speedminded and
BanannaFTW to do runs with.
sure. count me in.Originally Posted by M5 LITE
I"ll run. my pos is very slow
My car is factory....
Every single performance part and or modification it has was made in a factory somewhere.
I'll have my car this sunday, give me your number.
lets see if we can get this going, if not, i'll have to wait to run you for 1-2 weeks
nice vids. i love the way vettes sound. gg@dan
rafa: if ur sig is the truth, u did pretty damn good for 11psi, nice car! =] when the Phantom's ready we'll have to give it a go ^_^
I always play an open game, and all those numbers are from 2 weeks ago @ Dynolab..... I can seem to pass the 400whp markOriginally Posted by Z U L8R
. The turbo doesnt build boost after 15 psi....! it just dies..! I might try a dynopack to put some load in the rear wheels to build more than 15psi....
I'm thinking the car is too light, not enough load.. lol.
Rafa.
POS: What was the power of your Z?
TRM Stage 2 │TRM Coilovers │ TRM Pistons │ TRM Blowthrough Tuning │ TRM MAF & Injectors │ Watch My Crazy Videos
i remember the nite, i was talking about treadmill 75 in mexico lol, and i thought you were runnin c16 that nite. either way quick car. wish mine weighed less than 4000 lbs
2006 mustang gt
gears
bolt-ons
sounds like this cat is ignoring everyone hell i counted atleast 4 people that said they would race you....if you driving skills are so good the run what you brung......hell just because they make more power then you dont mean shit on the street. i see 13 sec cars beating up on 12 sec cars all day long on the street from digs of course...hell i got an 06 mustang bone ass stock with a damn cat-back and off road h-pipe that went 14.5 and ill run you on the street and in your own words IM GOING OFF MY DRIVING SKILLS.......that i can beat you. so how much change you looking to run for??
who is this directed to, and if you have a bone stock 06 gt you wanna buy some parts for it?Originally Posted by stanger04
2006 mustang gt
gears
bolt-ons
so far I have complied to race everyone who has wanted to run who will put up a fair fight....and told others with faster cars to tag along when we met up for fun runs.. regardless if their cars are inevitably going to rape mine. Feel free to tag along when we do this. I'm just waiting for everyone else to be ready. Oh yeah..you don't need much driving skill to run a 15 second car down with a mid 13's Mustang.....Originally Posted by stanger04
, nor drive a stock street car in a straight line down a smooth straight piece of asphault. I pray that you in your 06 Gt can run down my stock 93 325is or god forbid your downsyndrome
Sunday just might be a bad night to do it. I'm not sure if i'm even available then. I'm in no rush to do this however. PM me when your around and if you can be around before then. Also do you know good spots (i.e not BP esque 985 spots that are blind and risky). We'll talk and PM and set it up. I'd also like to get everyone who wants to go out (on the list) at once. So if that may take more time i'm willing.Originally Posted by BannanaFTW
Last edited by M5 LITE; 08-23-2007 at 03:02 PM.
sounds good to me, maybe get some additional runs in with others. I also got a buddy who may be interested if you are...05 TC with catback,intake+tune.Originally Posted by M5 LITE
sounds great. Bring on the TC! Lets shoot for next weekend, but if not I'm in no rush and can do it the weekend after and I believe i'll be at out town that labor day sat/sun/mon (if thats next weekend) but can possible set something up on Friday. If not we can always go the weekend after..I want everyone to be there so we can do it all at once since all of our cars are very similar. Ya'll give me feedbackOriginally Posted by KPowerEP3
i got a type R that wouldnt mind running for a lil bit of change.
to the guy that made this call-out.....send me a pm of what you got i might be intrested....
ummmmmmm dont think i have a 13 sec car it went 14.5 at 91mph if my memory is correct ill have to see if i can find the time slip.....and it actually takes alot more driving skill to run from a dig then it does from a roll everyone knows that.....
It's a mid 13 second car. I've had numerous runs with all sorts of mustangs..on and off the track...new and old. Feel Free to come out if you want. I'll send you a pm when its time with some notice.Originally Posted by stanger04
no offense but if you ran that in a 06 gt, theres somethin wrong the dealer must have taken 2 cylinders away. i trapped 103 with just exhaustOriginally Posted by stanger04
2006 mustang gt
gears
bolt-ons
+1. There was a chick at Commerce running 13.7@102-3 in a bone stock GT 6 speed.Originally Posted by onebadgt
im confussed....are you trying to tell me what my car runs????
dident you say you have a 2006 mustang gt, and ran a 14.5 @ 92. if so. somethin is wrong either your drivin a v6 or let off and coasted after 3rd gear. i meant i trapped 103 in my stang with just exhaustOriginally Posted by stanger04
2006 mustang gt
gears
bolt-ons