Results 1 to 36 of 36

Thread: 01Laser race

  1. #1
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default 01Laser race

    so I raced this cat today twice from 50+ rolls

    neck and neck til @ 120, then he pulled me @ 10 cars both times... I get him off the start just a tad, then we're even for it seems the longest, then bam it's like he's spraying a 250 shot! There's no bottle though... decent guy, I don't know why you guys give him so much shit. There's only about 5 cars on this site that can even give him a decent run...

    No video to be shared, because of new secret location...

  2. #2
    Chadbee Photography CHADbee's Avatar
    Join Date
    Oct 2005
    Location
    Kennesaw
    Posts
    20,312
    Rep Power
    50

    Default

    lasers car is pretty damn quick, dont think its slow.

  3. #3
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    Quote Originally Posted by CH@Dbee
    lasers car is pretty damn quick, dont think its slow.
    I presume you two have raced before?

  4. #4
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by FAHHQUE700
    so I raced this cat today twice from 50+ rolls

    neck and neck til @ 120, then he pulled me @ 10 cars both times... I get him off the start just a tad, then we're even for it seems the longest, then bam it's like he's spraying a 250 shot! There's no bottle though... decent guy, I don't know why you guys give him so much shit. There's only about 5 cars on this site that can even give him a decent run...

    No video to be shared, because of new secret location...
    what car were you in?

  5. #5
    Chadbee Photography CHADbee's Avatar
    Join Date
    Oct 2005
    Location
    Kennesaw
    Posts
    20,312
    Rep Power
    50

    Default

    Quote Originally Posted by FAHHQUE700
    I presume you two have raced before?
    nope, not yet. he allways told me that he didnt do "ricer rolls"

  6. #6
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    Quote Originally Posted by GTslOw
    what car were you in?
    what do you think??? His car pulls way harder up top than the red cobra you raced... I'm sure the guy you raced once he gets more fuel he can rev it past 5500 maybe to 7k like he use to, then it should pull harder up top forsure

    Quote Originally Posted by CH@Dbee
    nope, not yet. he allways told me that he didnt do "ricer rolls"
    He told me the same thing... but hey you can't resist when some punk comes reving up next to you no matter what you drive, right? That is just what I did... My car blows through the tires from a dig, so there's really no point in trying to do it on the street, hell even a prep'd track. With skinnys & slicks it's a different story, then it blows through the clutch!

  7. #7
    Certified Gearhead
    Join Date
    Apr 2007
    Posts
    690
    Rep Power
    20

    Default

    was it the black car?

  8. #8
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by FAHHQUE700
    what do you think??? His car pulls way harder up top than the red cobra you raced... I'm sure the guy you raced once he gets more fuel he can rev it past 5500 maybe to 7k like he use to, then it should pull harder up top forsure



    He told me the same thing... but hey you can't resist when some punk comes reving up next to you no matter what you drive, right? That is just what I did... My car blows through the tires from a dig, so there's really no point in trying to do it on the street, hell even a prep'd track. With skinnys & slicks it's a different story, then it blows through the clutch!
    if we are talking about the same cobra funny thing is that i was at the track with him sunday and he had no prob revving to 6700+rpm's

  9. #9
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    he didn't rev it that high when he raced you, well, he did when it wouldn't shift, that's why you pulled him in the begining, then he short shifted, and than started back reeling you in...

  10. #10
    b00sT jUnKy khan351's Avatar
    Join Date
    Aug 2006
    Location
    the motherland
    Age
    36
    Posts
    1,047
    Rep Power
    21

    Default

    so what car does 01laser have? i guessing its some kind of mustang???


  11. #11
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    Quote Originally Posted by khan351
    so what car does 01laser have? i guessing its some kind of mustang???
    01 cobra

  12. #12
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by FAHHQUE700
    he didn't rev it that high when he raced you, well, he did when it wouldn't shift, that's why you pulled him in the begining, then he short shifted, and than started back reeling you in...
    if i recall you were not even out that night so i don't know where u get your info.by the way i have already figured out you are real good at starting shit behind peoples back and i don't appreciate it

  13. #13
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by FAHHQUE700
    he didn't rev it that high when he raced you, well, he did when it wouldn't shift, that's why you pulled him in the begining, then he short shifted, and than started back reeling you in...
    btw i never claimed my car was uber fast like you tell people i say, but it was fast enough to drag your ass down the road. but let me guess you spun through 5th gear anytime you want to line that 2 tone car up again let me know maybe this time you can get some lengths

  14. #14
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by GTslOw
    if we are talking about the same cobra funny thing is that i was at the track with him sunday and he had no prob revving to 6700+rpm's

    I know what he ran and also know about spinning the tires in the Rims...Thats why he was able to... If the Slicks whould have had screws then it would have blew threw the Clutch... That car will go into the 6's... Yes Sir, Have a Nice day...

  15. #15
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by 1civic
    I know what he ran and also know about spinning the tires in the Rims...Thats why he was able to... If the Slicks whould have had screws then it would have blew threw the Clutch... That car will go into the 6's... Yes Sir, Have a Nice day...
    once again someone who doesn't know what the fuck is going on we were at calhoun all day sunday and yes he was on slicks and yes we were both blowing through the clutch.but its hard to get 1.50 60' times like he did if the clutch didn't grab some of the time.i have no problems with brandon its other people running their mouth starting shit behind their back that i have a problem with.

  16. #16
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by FAHHQUE700
    01 cobra
    You Sir are a JackAss... We make alot more power with the 2V KB cars, Quit BullShitin and bring the real car out.. Stop racing the 2 toned junk..

  17. #17
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by 1civic
    You Sir are a JackAss... We make alot more power with the 2V KB cars, Quit BullShitin and bring the real car out.. Stop racing the 2 toned junk..
    he has a baby now he needs to be at home and be the father he needs to be instead of out street racing

  18. #18
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by GTslOw
    once again someone who doesn't know what the fuck is going on we were at calhoun all day sunday and yes he was on slicks and yes we were both blowing through the clutch.but its hard to get 1.50 60' times like he did if the clutch didn't grab some of the time.i have no problems with brandon its other people running their mouth starting shit behind their back that i have a problem with.
    Easy Killer.... You just answered your own question... Yes he has a stock clutch and on Slicks it would have slipped if they had screws in them.. The rim spin in the tire thats why he only had a 1.5 60'... We have cars the pull 1.3 60's with his same setup... I wasn't being a Ass, I was messing with you on my post so chill... I don't think I have ever been a Ass to you, so why would I start now...

  19. #19
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by 1civic
    Easy Killer.... You just answered your own question... Yes he has a stock clutch and on Slicks it would have slipped if they had screws in them.. The rim spin in the tire thats why he only had a 1.5 60'... We have cars the pull 1.3 60's with his same setup... I wasn't being a Ass, I was messing with you on my post so chill... I don't think I have ever been a Ass to you, so why would I start now...
    i know he spun tires in the rims on the 26's but he was on the 28's this weekend he says these don't spin in the rim so who knows

  20. #20
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by GTslOw
    he has a baby now he needs to be at home and be the father he needs to be instead of out street racing
    You make a Good Point... WTF is he thinking....

    He is being called out for the 12th of this month.. Bring the Blk car, Load you mommy and the Baby up cause your going to a DRAG STRIP to run...

  21. #21
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by GTslOw
    i know he spun tires in the rims on the 26's but he was on the 28's this weekend he says these don't spin in the rim so who knows

    Hes On Tims Rims and They will... We all Talked about it at work, Thats why his trans is still alive and he has a clutch... .. If he would listen to us and put a Shit-O-Matic in it Then it would be a Beast... :boobies: .. But Funds don't permit and I'm sure he would rather a Fuel system so he could use the blower like it should be used.. .. But you never know, If he breaks the shit then we will see...

  22. #22
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by 1civic
    Hes On Tims Rims and They will... We all Talked about it at work, Thats why his trans is still alive and he has a clutch... .. If he would listen to us and put a Shit-O-Matic in it Then it would be a Beast... :boobies: .. But Funds don't permit and I'm sure he would rather a Fuel system so he could use the blower like it should be used.. .. But you never know, If he breaks the shit then we will see...
    he is alot like me we live on borrowed time and seem to get lucky i think i finished off a motor mount sunday i have 1 bumping now

  23. #23
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by GTslOw
    he is alot like me we live on borrowed time and seem to get lucky i think i finished off a motor mount sunday i have 1 bumping now
    Fix that shit, also Fix the clutch since you will be under the car...

  24. #24
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by 1civic
    Fix that shit, also Fix the clutch since you will be under the car...
    as soon as i do the clutch the rear end will brake so i am just gonna save my money and do them all at the same time

  25. #25
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by GTslOw
    as soon as i do the clutch the rear end will brake so i am just gonna save my money and do them all at the same time

    Yeah a 8.8 will take more than that 7.5 you got.. ..

  26. #26
    The Red One
    Join Date
    Jun 2006
    Age
    43
    Posts
    526
    Rep Power
    20

    Default

    Quote Originally Posted by 1civic
    Yeah a 8.8 will take more than that 7.5 you got.. ..
    yea the 7.5 is the worst rear in the world

  27. #27
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by GTslOw
    yea the 7.5 is the worst rear in the world
    I'm guess the 10 bolt is close in size with the 7.5.... I'm not a Chevy guy, So sorry... Etherway I would upgrade...

  28. #28
    Senior Member onebadgt's Avatar
    Join Date
    Apr 2007
    Age
    39
    Posts
    1,870
    Rep Power
    20

    Default

    wow how did i miss this thread lol, gtslow bn a ass as usual lol jk dont make me bring the neon out and bust urs,andrews, and brandons ass lol. but seriously idk bout the rear end but you def. needa clutch upgrade, there 8.8 rear ends sellin on ebay pretty cheap

  29. #29
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    won't be the first neon to beat me... there is a bunch of lil' neons that will surprise you. i dont think i've talk to but one guy with a neon with under 300hp out and about...

  30. #30
    Senior Member onebadgt's Avatar
    Join Date
    Apr 2007
    Age
    39
    Posts
    1,870
    Rep Power
    20

    Default

    ya there real quick cars if you gotta couple gs to put in them but what ive noticed is that no matter how nice or fast they are they still look like a neon and get called a neon. even when my srt was faster that my mustang i still got at least 10x more attention in the stang lol. you goin to track day andrew

  31. #31
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by onebadgt
    ya there real quick cars if you gotta couple gs to put in them but what ive noticed is that no matter how nice or fast they are they still look like a neon and get called a neon. even when my srt was faster that my mustang i still got at least 10x more attention in the stang lol. you goin to track day andrew

    Well since he run 13's I don't think he will show up... ... Hes worried that My Honda Will bust his ass in the 1/4... :boobies:

  32. #32
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    I'm not sure, just yet... car is ready, sorta I just need some 28" slicks, I have some 26s, but Tim thinks they might put me in the wall, he says I need something with a little bigger side wall

  33. #33
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    45
    Posts
    6,449
    Rep Power
    31

    Default

    Quote Originally Posted by FAHHQUE700
    I'm not sure, just yet... car is ready, sorta I just need some 28" slicks, I have some 26s, but Tim thinks they might put me in the wall, he says I need something with a little bigger side wall
    Yeah Yeah... Run that shit and see for yourself... Its not to bad.. We will be there to help you out.. Make a Shakedown pass and you'll be good...

  34. #34
    Banned
    Join Date
    Oct 2006
    Age
    47
    Posts
    142
    Rep Power
    0

    Default

    Hey, it's me....man yall are some hijackin mo'fo's...yes it's an 01 cobra ...just check the sig..oh and i also picked me up another one...


  35. #35
    b00sT jUnKy khan351's Avatar
    Join Date
    Aug 2006
    Location
    the motherland
    Age
    36
    Posts
    1,047
    Rep Power
    21

    Default

    so your 01 has an 03 motor?? if so..NIce ..and congrats on the new car


  36. #36
    Banned
    Join Date
    Oct 2006
    Age
    47
    Posts
    142
    Rep Power
    0

    Default

    Quote Originally Posted by khan351
    so your 01 has an 03 motor?? if so..NIce ..and congrats on the new car
    No, it is the original high compression engine with an 03 Eaton converion...MPH did it for me and my limiter is set to 6000rpm on the dot

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!