Results 1 to 15 of 15

Thread: Best way to touch up paint chips?

  1. #1
    IA Member FostyTG28's Avatar
    Join Date
    Jul 2010
    Location
    Lawrenceville
    Posts
    94
    Rep Power
    0

    Default Best way to touch up paint chips?

    Alright so before I bought my Maxima, the guy must have been driving behind a truck/car that sent some rocks at my Max. Now theres a bunch of spots on the hood where the rocks chipped the paint. I already have the small bottle of touch up paint that I ordered from Nissan, but now that it is here, I'm afraid I'm gonna fuck it up and make it look worse. Anyone have any tips on how to do it right? If a picture is needed, I can have one up tomorrow afternoon since its too dark out now to get a clear pic.

    Thanks
    2001 Nissan Maxima SE
    1989 Ford Crown Victoria LTD
    Stay FROSTY

  2. #2
    IA's Resident Medic Bacon's Avatar
    Join Date
    Oct 2007
    Location
    McDonough
    Age
    38
    Posts
    10,591
    Rep Power
    34

    Default

    Go to Autozone or something. They should have bottles of touch up paint specifically for your paint code.
    Quote Originally Posted by Echonova View Post
    Bitches love bacon.

  3. #3
    IA Member FostyTG28's Avatar
    Join Date
    Jul 2010
    Location
    Lawrenceville
    Posts
    94
    Rep Power
    0

    Default

    I've already got the paint, I'm just afraid that my DIY will make it look worse haha
    2001 Nissan Maxima SE
    1989 Ford Crown Victoria LTD
    Stay FROSTY

  4. #4

    Default

    Autozone touch-up is your best bet, just make sure you find matching color and dont over use it, try using minimal amount depending on the size of damage/chip and then add more paint if needed.

  5. #5
    Share the road SLOWR/T's Avatar
    Join Date
    Mar 2005
    Location
    G-net
    Posts
    4,344
    Rep Power
    25

    Default

    Depending on the size area you are working with it might be better to just spray it. If thats not a option though the best way that I have touched up a car is just to touch up the area that you are wanting to. Be sure that you put enough over it to cover the full chip. Go back after a couple days (once it has dried good) and take 2000 grit sand paper, water sand the area around the chip to get any excess paint off you left behind. It would be best to you a block to do this because your fingers will go into the chip and sand out the paint you have in there. If you are careful and don't go over the chip are to much you will leave the paint you touched up in the chip, then you can just buff it out. You can PM me if you have any questions.
    One Big Ass Mistake America

  6. #6
    325is NJSC's Avatar
    Join Date
    Dec 2009
    Location
    Buford
    Age
    38
    Posts
    261
    Rep Power
    15

    Default

    I haven't had any experience with paint but I can remember working with a guy and he said using the right brush also has a lot to do with it. He would also just use clear in chips if the car had any sort of flake in it. Any thoughts on that?
    that's how I roll

  7. #7
    Certified Gearhead jimjam187's Avatar
    Join Date
    Oct 2005
    Age
    42
    Posts
    463
    Rep Power
    19

    Default

    low grit sandpaper 2000, use the touch up paint then buff and wax, works great.

  8. #8
    Certified Gearhead jimjam187's Avatar
    Join Date
    Oct 2005
    Age
    42
    Posts
    463
    Rep Power
    19

    Default

    Quote Originally Posted by SLOWR/T View Post
    Depending on the size area you are working with it might be better to just spray it. If thats not a option though the best way that I have touched up a car is just to touch up the area that you are wanting to. Be sure that you put enough over it to cover the full chip. Go back after a couple days (once it has dried good) and take 2000 grit sand paper, water sand the area around the chip to get any excess paint off you left behind. It would be best to you a block to do this because your fingers will go into the chip and sand out the paint you have in there. If you are careful and don't go over the chip are to much you will leave the paint you touched up in the chip, then you can just buff it out. You can PM me if you have any questions.
    Sorry didnt read his, but waht he said!

  9. #9
    IA Member FostyTG28's Avatar
    Join Date
    Jul 2010
    Location
    Lawrenceville
    Posts
    94
    Rep Power
    0

    Default

    Awesome, thanks for the info. I'll probably do this over the weekend so the paint has maximum amount of time to dry and whatnot before I drive my Max again
    2001 Nissan Maxima SE
    1989 Ford Crown Victoria LTD
    Stay FROSTY

  10. #10
    I♥mydick ٩(-̮̮̃•̃)۶ FasTech's Avatar
    Join Date
    Mar 2008
    Location
    Middle, Ga
    Age
    35
    Posts
    12,577
    Rep Power
    35

    Default

    I'm going to make this as simple as I can possibly put it. DO NOT attempt to apply any body work, paint, etc to ANY car if you have no experience at all, right now. 99% of the time, people screw simple fix problems like this most of the time. Not trying to knock you or anything by no means... but stuff like this takes practice and time on shit of no value. lol. That cheap crayon shit you buy fron Advance and Auto-zone do NOT work as promised. You may or may not like the finial apperance of the finished product after you're done. And, from past reviews, you won't.

    I use to do small body work and its really not hard, just takes time to get better. Practice, practice, practice... Find an old hood or etc, read up some tech articles and practice doing it the right way. Then fix your problem the right way so you won't worry about it looking worse. Plus, alittle knowledge in body work doesn't hurt anyone.
    "Damn, Its Tyler"
    RaceReadyDevelopments

  11. #11
    Newbie Photodude RBS's Avatar
    Join Date
    Dec 2006
    Location
    All Over U S A
    Age
    33
    Posts
    4,685
    Rep Power
    24

    Default

    if its chips throught the clear and into the color coat, it will be hard to fix. generally you just get the part repainted if its bad, but if its in the clear you can do VERY minor wetsanding and buff it out.

  12. #12
    IA Member FostyTG28's Avatar
    Join Date
    Jul 2010
    Location
    Lawrenceville
    Posts
    94
    Rep Power
    0

    Default

    A lot of it is chipped all the way throug the color layer, and don't worry, I don't have the cheap AutoZone paint. I ordered it directly FROM Nissan
    2001 Nissan Maxima SE
    1989 Ford Crown Victoria LTD
    Stay FROSTY

  13. #13
    Certified Gearhead
    Join Date
    Jan 2009
    Location
    West Ga
    Age
    40
    Posts
    285
    Rep Power
    16

    Default

    I do touch up painting for a living if your wanting to get it done professionally...

  14. #14
    too legit to quit HateCity24's Avatar
    Join Date
    Jan 2007
    Location
    snellville/ gwinnett
    Age
    36
    Posts
    186
    Rep Power
    18

    Default

    find a paint PEN matching your color code. Got one offline for my epb civic. Has a real fine felt tip with paint on one side then you flip it over and it has a real fine tip clearcoat on the other. Not gonna look like a professional job but will look much better than blobbing it on with a brush. worked great for my little chips.
    Daily. Ej8 with em1 front end conversion in the works.
    Drift slut: 91 miata.

  15. #15
    I VTEC'd your mom Humphrizzle's Avatar
    Join Date
    Oct 2005
    Location
    Newnan
    Age
    35
    Posts
    11,007
    Rep Power
    34

    Default

    thoroughly clean the work area
    apply touch up paint to the damaged area.
    wait until dry
    wetsand with 1200 grit wet/dry sandpaper
    buff until clear.

    good luck.
    Quote Originally Posted by MR.EM1 View Post
    learn to english

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!