Page 1 of 2 12 LastLast
Results 1 to 40 of 50

Thread: B-SERIES RACE PARTS!!!!!! LIQUIDATION!!!!!

  1. #1
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default B-SERIES RACE PARTS!!!!!! LIQUIDATION!!!!!

    dual bosch 044 fuel pump set-up:



    1 bnib aeromotive fpr new
    2 -8 prolite feed lines
    2 mallory FI filters
    2 bosch 044 pumps
    2 -8 steel braided lines
    Magnafuel -8 to -10 Y distribution block
    2 -10 AN to Flare fittings new
    12ft of Moroso Alum 5/8th hard line
    Aeromotive fuel filter
    -8 steel line to rail
    -6 return line
    -6 banjo fitting back into tank.


    $650 obo sump is not included















    95 gsr head:



    hot tanked and crack checked

    port-flow stage 3 port and polish

    supertech stainless steel nitride coated valves

    3 angle competition valve job

    combustion chambers deshrouded and shaped

    new valve seals

    supertech dual valve springs

    supertech titanium retainers



    this head came straight from laskey racing and was never used. im done with honda's so this has to go. here is alink so you can see the cost of this build. keep in mind i used my own gsr head so the price you see is what it cost to build this head http://laskeyracing.com/shop/portflow.htm . once again this head was never used. $1400 obo this price is more than fair considering the amount of money it would take to build this same set-up.































    obd-1 gsr distributor with msd cap, msd 6al box, msd blaster coil, msd wires $300 obo







    act AI4-XXG6 clutch kit maxx xtreme pressure plate and 6-puck sprung race disc. retails for $660....im giving it away at $450! that price is firm. this has never been used. the pressure plate has been un wrapped but never mounted disc is still wrapped.







    -10 an hose and fittings..pm me what you want







    also have the following items but now pictures just yet. my camera is jacked up. please pm or text me for pics on the following items:



    un-cut 95 gsr harness very complete $115

    stewart warner shiftlight/digital tach $100

    stewart warner fuel pressure guage and sender $75

    bdl 72mm throttle body and vacuum spacer comes with tps..no map $300

    summit battery relocation kit - $50..only 1 left!

    b series axles $50 each

    obd-1 b series alternator $75



    most prices are obo but please be reasonable. pm me here to ask any questions or text me at 478 550 8304. i am located in perry ga and i am willing to meet half way but no further. if we cannot meet half way i will ship anything at your expense..you will pay actual shipping charges.
    Last edited by japan4racing; 11-20-2008 at 02:53 PM.

  2. #2
    FLOSSIN' MR.EM1's Avatar
    Join Date
    Mar 2008
    Age
    38
    Posts
    1,377
    Rep Power
    21

    Default

    wow good stuff
    FL

  3. #3
    General Tech Hater
    Join Date
    Aug 2005
    Age
    41
    Posts
    1,935
    Rep Power
    23

    Default

    dibs on relocation kit sucka!
    Official "Delete the clubs/crew section of IA" Member #1


    Quote Originally Posted by chouston86 View Post
    So this is how it goes down when I beat you I want the cash and the respect. To some people thats more important. Sounds familiar?

  4. #4
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    werd b-rett gets the relocness monstAr!!!! and i have another brand new one for $50 from a freind so if anyone wants one let me know!!!
    Last edited by japan4racing; 11-09-2008 at 12:37 PM.

  5. #5
    cravin a s2k
    Join Date
    Mar 2005
    Location
    Cookeville, Tennessee, United States
    Age
    38
    Posts
    757
    Rep Power
    22

    Default

    what car are the traction bars for? and do you still have the sleeved block?

  6. #6
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    traction bars will fit 92-2000 civic and 94-01 tegs. block is gone....this is all i have left with the exception of my gsr trans and wavetrac lsd which will not be sold just yet.

  7. #7
    02 WRX patrick4588's Avatar
    Join Date
    Feb 2007
    Location
    warner robins
    Age
    38
    Posts
    2,329
    Rep Power
    22

    Default

    keep messing around and dont put the tranny together til this summer so i can buy it
    GCO Member
    NRA Member

  8. #8
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    ttt...i gotta move this stuff fast

  9. #9
    The names "Skeezy1" Samhonda95's Avatar
    Join Date
    Jul 2007
    Location
    South Ga. (Pelham)
    Age
    44
    Posts
    491
    Rep Power
    20

    Default

    bump for great stuff

    i'm in the market for all this stuff but low in cash right now

  10. #10
    Classic Celica
    Join Date
    Mar 2005
    Location
    Orlando, FL.
    Age
    45
    Posts
    370
    Rep Power
    22

    Default

    is the cat for sale? my girlfriend wants.

    '84 Toyota Celica GT :boobies:

  11. #11
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    haha thats my moms cat she is not for sale..thanks fot the bump!!!

  12. #12
    Boosted 2 Perfection GSRTURBOTEG's Avatar
    Join Date
    Nov 2007
    Location
    The Jungle
    Age
    44
    Posts
    629
    Rep Power
    20

    Default

    hey Matt, sad to see you sell your stuff wish I had another project to take it off your hands. GLWS

  13. #13
    cravin a s2k
    Join Date
    Mar 2005
    Location
    Cookeville, Tennessee, United States
    Age
    38
    Posts
    757
    Rep Power
    22

    Default

    i may get those traction bars from you this weekend if any of my stuff sells.

  14. #14
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    better hurry..i got 3 ppl interested! 2 are local!

  15. #15
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    ttt

  16. #16
    DA with a lil sumtin Dev's Avatar
    Join Date
    Jul 2008
    Location
    Rome
    Age
    37
    Posts
    1,899
    Rep Power
    21

    Default

    will traction bars fit a sol?

  17. #17
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    injectors just sold and these traction bars will def fit a del sol

  18. #18
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    bumpity bump!!!!!!

  19. #19
    02 WRX patrick4588's Avatar
    Join Date
    Feb 2007
    Location
    warner robins
    Age
    38
    Posts
    2,329
    Rep Power
    22

    Default

    Quote Originally Posted by LSTurboHatch
    i may get those traction bars from you this weekend if any of my stuff sells.
    you can get the bars and my ic piping in one trip!
    GCO Member
    NRA Member

  20. #20
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    bump

  21. #21
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    the tank from the breather set-up is sold still have all lines and fittings

  22. #22
    cravin a s2k
    Join Date
    Mar 2005
    Location
    Cookeville, Tennessee, United States
    Age
    38
    Posts
    757
    Rep Power
    22

    Default

    ^^traction bars sold too

    patrick said something about you might have some lensos i can buy. pm me if you do

  23. #23
    02 WRX patrick4588's Avatar
    Join Date
    Feb 2007
    Location
    warner robins
    Age
    38
    Posts
    2,329
    Rep Power
    22

    Default

    he sold em
    GCO Member
    NRA Member

  24. #24
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    yea lensos are gone...still got other stuff

  25. #25
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    bump

  26. #26
    Certified Gearhead
    Join Date
    Oct 2008
    Age
    43
    Posts
    264
    Rep Power
    19

    Default

    that head job makes me feel all warm and fuzzy inside

  27. #27
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default



    that sounded weird

  28. #28
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    up top...lets move this stuff

  29. #29
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    up top..make some offers this shits gotta go

  30. #30
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    time to move this stuff

  31. #31
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    edelbrock manifold just sold!!!! come on ppl buy my stuff so i can get a vette!

  32. #32
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    ttt

  33. #33
    cravin a s2k
    Join Date
    Mar 2005
    Location
    Cookeville, Tennessee, United States
    Age
    38
    Posts
    757
    Rep Power
    22

    Default

    i got 1000 cash for the head.... let me know.

  34. #34
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    hey man i just got your text....i cant do 1000 thats way too low

  35. #35
    cravin a s2k
    Join Date
    Mar 2005
    Location
    Cookeville, Tennessee, United States
    Age
    38
    Posts
    757
    Rep Power
    22

    Default

    didnt mean to lowball you man. i just thought i would offer. i got another 200 now. just trying to get the rest of it. i wish you still had that IM

  36. #36
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    up top...gotta move this shit so i can make room for the vette

  37. #37
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    make offers

  38. #38
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    ttt

  39. #39
    cravin a s2k
    Join Date
    Mar 2005
    Location
    Cookeville, Tennessee, United States
    Age
    38
    Posts
    757
    Rep Power
    22

    Default

    ive got the money for that head. ill text you later on today. you dont happen to have an intake manifold for a GSR do you?

  40. #40
    NOT BUILTED japan4racing's Avatar
    Join Date
    Mar 2005
    Location
    middle ga
    Age
    44
    Posts
    2,574
    Rep Power
    25

    Default

    nope no intake manifolds..let me know on that head i got a local guy that wants it

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!