B18C5 (Type-R) HEAD - COMPLETE

**Benefit** · 02-25-2008, 09:49 AM

I have up for sale a complete head from a b18C5 (type-r) from a 2001 type-r , this includes EVERYTHING but the valve cover, the valve cover can also be purchased for the right price

.

The head is hand port and polished on the intake side , it made 176whp and 143tq from just the port and polish.

i will NOT part out , i am selling this as a whole , which means it includes
cams , valve springs , valves , retainers , everything...just slap it on your b-series block or whatever...OR you can buy my whole longblock, PM me for details.

1200$

i can be reached at AIM = benefitx but its best if you call me 678-462-8928

**Benefit** · 02-25-2008, 01:50 PM

bump

**mr.koupe** · 02-25-2008, 02:10 PM

nice gl. i got 1k on it ..... lol @ my lowball

**Benefit** · 02-25-2008, 02:38 PM

offers are great, keep them coming.

**GSRteg®** · 02-25-2008, 04:33 PM

For $1,500 the VC should come with it just my

**Batlground** · 02-25-2008, 04:50 PM

A type-R head is port an polished by hand from the factory.

A type-R makes 170whp bone stock but there is NO WAY it made 143/TQ. NOT POSSIBLE with stock header on it.

The HIGHEST 1.8L TQ i have ever seen was DA_UNKNOWNs ITR and it made 132TQ (he had an RMF header, $3000 skunk2 cylinder head, Skunk2 PRO1 cams.)

YOu can ask whatever you want but the head is worth:
$300-350 for cams
$400-500 for the assembled head minus cams
$150 for the distributor
$100 for the valve cover
$100 for the intake manifold
$75 for the TB

You are better off parting it out.

**Berta** · 02-25-2008, 04:57 PM

My stock itr head made 135 torque w/ a dc 4-1(non-jdm itr) tuned by Ed@Balanced. I dont know about the 143 tho.

**Batlground** · 02-25-2008, 05:05 PM

Originally Posted by Berta

My stock itr head made 135 torque w/ a dc 4-1(non-jdm itr) tuned by Ed@Balanced. I dont know about the 143 tho.

wow, thats alot. ive never seen over low 130s on a stock block OEM honda, but you had at least an aftermarkt header

on a cast header, thats nearly impossible IMO

**Benefit** · 02-25-2008, 05:44 PM

maybe it was 134?

**Benefit** · 02-25-2008, 05:45 PM

acura would charge you 3000$ for the head , and here is an ebay link to 01 R head for 1700$

http://cgi.ebay.com/ebaymotors/LAS-V...spagenameZWDVW

**Benefit** · 02-25-2008, 05:51 PM

Originally Posted by Batlground

A type-R head is port an polished by hand from the factory.

A type-R makes 170whp bone stock but there is NO WAY it made 143/TQ. NOT POSSIBLE with stock header on it.

The HIGHEST 1.8L TQ i have ever seen was DA_UNKNOWNs ITR and it made 132TQ (he had an RMF header, $3000 skunk2 cylinder head, Skunk2 PRO1 cams.)

YOu can ask whatever you want but the head is worth:
$300-350 for cams
$400-500 for the assembled head minus cams
$150 for the distributor
$100 for the valve cover
$100 for the intake manifold
$75 for the TB

You are better off parting it out.

these estimated figures you have given round about to 1400$.

and they stopped hand port and polishing them after 97 or 98 (forgot) because it was cheaper by machine. i dont know what Rob did but i am just posting from what i have been told.

**Batlground** · 02-25-2008, 05:56 PM

Originally Posted by Benefit

these estimated figures you have given round about to 1400$.

Thats what im saying, no one is going to giv you $1400 on here

Part it out, youll make more an faster

**Benefit** · 02-25-2008, 05:59 PM

We will see, i have gotten a couple PM's , let see if anyone pulls through wanting to rebuild a B18C5.

**jadakid88** · 02-25-2008, 06:04 PM

y are you parting? you must be goin k series?

**Benefit** · 02-25-2008, 06:26 PM

^^ read the description please.

**jadakid88** · 02-25-2008, 06:41 PM

i did! it says nothing why you are gettin rid of it!

Originally Posted by Benefit

^^ read the description please.

**jadakid88** · 02-25-2008, 06:43 PM

QFT! i was just askin btw![QUOTE=Benefit]I have up for sale a complete head from a b18C5 (type-r) from a 2001 type-r , this includes EVERYTHING but the valve cover, the valve cover can also be purchased for the right price

.

The head is hand port and polished on the intake side , it made 176whp and 143tq from just the port and polish.

i will NOT part out , i am selling this as a whole , which means it includes
cams , valve springs , valves , retainers , everything...just slap it on your b-series block or whatever...OR you can buy my whole longblock, PM me for details.

1500$

i can be reached at AIM = benefitx but its best if you call me 678-462-8928

**VickNotic** · 02-25-2008, 06:44 PM

looking for any trades?

**94excoupe** · 02-25-2008, 07:21 PM

jadakidd88 her is your answer he has a thread for the block. by the way you should probably let people know that this motor was run low on oil

quote=benifit(i have up for sale a b18c5 (type-r) shortblock, it includes all the internals

crank , rods , pistons , oil pan , baffle

the only thing is that it is knocking , it can be rebuilt , it was ran low on oil and has a knock...i am just going to put a JDM B18C in my car because all i have time for is a swap. i simply have no time for a rebuild since i go to college , and have work in between while still paying off the car.

i can be reached at AIM = benefitx but its best if you call me 678-462-8928

500$)

**DoriDori** · 02-25-2008, 07:36 PM

Originally Posted by Benefit

The head is hand port and polished on the intake side , it made 176whp and 143tq from just the port and polish.

[/b]

B18c5 heads are ported and polished by honda already. 96+spec is hand polished, and 98+ was port/polsh by machine. So what work did you have done to it?

**PURP** · 02-25-2008, 08:18 PM

Originally Posted by DoriDori

B18c5 heads are ported and polished by honda already. 96+spec is hand polished, and 98+ was port/polsh by machine. So what work did you have done to it?

^^^ read the post the head is a 01 so he had to port and polish HIMSELF... he knows factory machine porting was done 98+ so THIS 01 head has been ported and polished MORE. GL with sale man

**kainkauz** · 02-25-2008, 10:17 PM

good luck free bump

**Benefit** · 02-25-2008, 11:00 PM

^^thanks , last bump of the night.

**Benefit** · 02-26-2008, 12:02 PM

bump!

**Benefit** · 02-26-2008, 04:50 PM

bump , really want to sell the whole longblock as one piece.

**Benefit** · 02-26-2008, 07:51 PM

bump

**bRiAnMcIvIcS** · 02-26-2008, 09:02 PM

I will even trade you a skunk2 intake mani(brand new in the box) for your intake manifold and throttle body? I bought it for $250. What do you think??? If you need money on my part i'll give you an extra $50. lmk.

**Benefit** · 02-27-2008, 02:26 PM

bump

**pimpstaman90** · 02-27-2008, 04:22 PM

Originally Posted by Benefit

acura would charge you 3000$ for the head , and here is an ebay link to 01 R head for 1700$

http://cgi.ebay.com/ebaymotors/LAS-V...spagenameZWDVW

THATS WHY IT HAS "0" BID(S)

MY BOY GOT HIS FROM HONDA PARTS CONNECTION FOR $1350... WHOLE HEAD WITH THE COVER AND STUDS...

**speedminded** · 02-27-2008, 04:28 PM

Originally Posted by pimpstaman90

THATS WHY IT HAS "0" BID(S)

MY BOY GOT HIS FROM HONDA PARTS CONNECTION FOR $1350... WHOLE HEAD WITH THE COVER AND STUDS...

That's impressive for HPC!

I think Honda/Acura cost is around $1,500-1700 but that's AT cost...that's how I got my new shortblock AND complete head unassembled for under $3k brand new

**TheChosenOne** · 02-27-2008, 05:15 PM

Sammy! HOW THE PHUCK did you blow up that Type R! Damn it would suck to be you right now. Anyway... what are you gunna put in it?

**Benefit** · 02-27-2008, 05:30 PM

JDM B18C

**SPOOLIN** · 02-27-2008, 05:33 PM

ill give 150$ for the intake cam!

**Benefit** · 02-27-2008, 05:44 PM

read description please

**Benefit** · 02-28-2008, 02:26 PM

bump

**scrxils** · 02-28-2008, 05:48 PM

good luck man

**Benefit** · 02-28-2008, 10:48 PM

night bump

**TRDwasiq** · 02-28-2008, 11:05 PM

bumpyyyyyyyyyyyyyyyyyy

**i4_garage** · 02-29-2008, 10:37 AM

What a ripp-off! Hand port and polished? Did you even throw it on the bench flow to see the results because it can even hurt the velocity and cfm w/o that machine. Good luck if you can find a dummie to buy it for that price.

**Benefit** · 03-01-2008, 02:31 PM

bump

Thread: B18C5 (Type-R) HEAD - COMPLETE

Thread Tools

Display

B18C5 (Type-R) HEAD - COMPLETE

Posting Permissions

About us

Announcement