perfect jdm tilt for your exhaust
im looking for a shop to put on a hks hi power on my ef hatch soon and wanted to know a good shop to give me a nice tilt i have seen some BAD jobs and dont want mine to look like that im on the southside but work and spend alot of time in marietta so any help would be great
you do not need a jdm tilt
<---Click it.
shuddup!! i want one dammit did you get your mounts yet?
mounts are in, just waiting for my poly inserts
lmk I know some one that is cool as ****,plus can do some welding,an exhaust work he has his own shop also, Pm me for his number , he's location is in Ellenwood,GA
make it look like a hard on tilt. jdm tyte
Pm'ed
go to mainstream performance in powder springs
i wouldnt make it before they close!!
you need to customize yours then, right? I think mainstream would do a great job, and they are nice people.
why tilt unless it needs to be tilt for a straighter exhaust flow?
to collect rain so the base weld at the bottom of the muffler rusts through.Originally Posted by redrumracer
Exactly, one 45 degree angle is alot straighter not to mention less difficult to make then two 90 degree angles. I prefer running it straight out but that depends on the original exhaust and bumper design (side of outlet).
Plus having it at an angle can sometimes allows more ground clearance in the rear, if you're often trailering or towing the car that may be useful...
Lol the best answer in here.
Garage-Sixgun
If you're gonna do it, overdo it.
Dirty Octopus Photography. Magic with a shutter!
Exactly. The people these days have no clue.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
LOL@"jDmTiLt"
][STREETLOVE][
theres no correct way to have a tilted exh on a ef anyway
Wrong, but there is no one who will run it the correct way to do the "JDM tilt
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
pm sent.........
its gonna look really goofy...Wrong, but there is no one who will run it the correct way to do the "JDM tilt
have a exhaust running under the control arm, and allllllll the way over to the opposite side where the cutout in the bumper is for th exh. more power to u!
You don't get it. The only reason an EF would NEED the tilt from a functional standpoint would be if it was ran like the JDM RS*R exhaust is ran on the DC2, which is under the gas tank.its gonna look really goofy...
have a exhaust running under the control arm, and allllllll the way over to the opposite side where the cutout in the bumper is for th exh. more power to u!
Follow how the exhaust is ran on this car. It is under the gas tank. Less bends=more power.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
You don't get it. The only reason an EF would NEED the tilt from a functional standpoint would be if it was ran like the JDM RS*R exhaust is ran on the DC2, which is under the gas tank.
Follow how the exhaust is ran on this car. It is under the gas tank. Less bends=more power.
oh i know all that, its obvious hes not goin for a need, hes goin for a look, but i see what u mean if he runs it without the last bend and go right under the tank. But its gonna scrape like crazy.. and like a guy said earlier, it will collect water, and rust on the first weld after the muffler...lol
i had the gangsta tilt on my pro, but i had to.
id rock one of these type on the ef..
No BTLFED, you know just as well as I do that no amount of power in a car makes you feel like a man unless your exhaust has a tilt. I mean damm man, this kid is reaching out to us on a base level as human beings, with his dreams and his weakness for all things JDM. We must embrace him, coddle him like a child and nurse this JDM fetish of his, support it as it were. Who are we to sh!t on his dream of a perfectly tilted exhaust pipe...You don't get it. The only reason an EF would NEED the tilt from a functional standpoint would be if it was ran like the JDM RS*R exhaust is ran on the DC2, which is under the gas tank.
Follow how the exhaust is ran on this car. It is under the gas tank. Less bends=more power.
Garage-Sixgun
If you're gonna do it, overdo it.
Dirty Octopus Photography. Magic with a shutter!
Mainstream Performance!
Boost under slow construction...
Jay why don't you want it straight back lol, you don't want to be in the same category as myself
Some friend you are
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Maybe I can help...
You didn't put the proper degree angles on it. No numbers. How is anyone supposed to know the exact and proper measurements to give to the Pep Boys pipe bender?
Garage-Sixgun
If you're gonna do it, overdo it.
Dirty Octopus Photography. Magic with a shutter!
lmao perfect diagram
jdm titls ftl
I've never seen a tilted exhuast on a hatch, usually just on drift cars. I can't imagine it looking too good, but if it's what you want go for it.
lmao at this thread i really should have put my flamesuit on first! ok maybe i should have made it more clear of what i am looking for the above pic of NAIZBST's car is exactly what im trying to do i want the look that my apexi N1 catback has on my teg as far as the importance of the tilt or how much its tilted i could care less what some ppl on this board think of it or if it will rust out ive been to hella meets and seen clean cars with the "JDM TYTE" tilt and i personally like it as far as how it will look on my hatch i have seen that too.
I am clearly not going to have it to close so that it burns my bumper i want a evo look to it i guess its hard to explain what i want as i can point it out better with the exhaust in my hand than i can type it but i will post a pic to help with what i am trying to go for.
Last edited by JDMJAYDC2; 11-12-2007 at 05:21 PM.
as you can see its a slight tilt and upwards angle that im looking for NAIZBST's car is exactly what i want now if you can point me in the direction of a shop that can do this then reps to you if not then i ask that you do not respond in this thread
The Ricist community frowns upon your senseless shenanigans
Besides, Mandrel bent pipes will get you the most power if you don't have enough clearence for straight piping + JDM tilt. I think it's ricey as hell to do JDM tilt on a car with multiple bends. It will hurt performance more than anything. But that's your vehicle and no one can change your mind so good luck to you
K series 626. That's right. It's got a K in it.
we are open m-f
M,W,F 10-6
T,Th 10-8
If you want us to do it.
The EMPIRE
Posting Permissions
Reply With Quote
