S13 Custom dash pieces

[gijeff1805]

I used the stock center console and covered it with a thin cloth material so i could lay fiberglass on it...i fiberglassed it a couple times to make it nice and sturdy and then its just alot of sanding and what not and you can keep laying on just fiberglass resin and hardner

the gauge cluster i used plexiglass pretty much and started tracing the inside so i could have an idea on what shape and size and then sanded from there to get it to fit

[speedminded]

I used the stock center console and covered it with a thin cloth material so i could lay fiberglass on it...i fiberglassed it a couple times to make it nice and sturdy and then its just alot of sanding and what not and you can keep laying on just fiberglass resin and hardner

the gauge cluster i used plexiglass pretty much and started tracing the inside so i could have an idea on what shape and size and then sanded from there to get it to fit

lolol, why not get a sheet of plastic or aluminum and simply cut it to fit? It would only cost a few bucks at most and take 15 minutes.

You could even get a sheet of carbon fiber that size for under $20.