Quote Originally Posted by TRDwasiq
how will u fit this on 20v?? wonderin

Well the SC12, a smaller version of the same Supercharger is what was mounted to the S/C MR2's. the SC12 and 14 are very close in how each one mounts, with slight differences. basically, i cut the harness off the Previa so i'll have all the pins to re-wire onto my existing 20v/16v harness. I'd be able to use the stock S/C MR2 supercharger bracket, modify it to hold the slightly larger S/C, run an accessories belt to the new S/C using the stock 2 row crank pully and the previa tensioner, and the stock S/C MR2 supercharger pully (6-8 psi...my 10.5/1 high compression cant handle too much). once thats all hooked up, then its only a matter of piping, routing and intercooler, inlet return/Bypass valve (it came with an electronic bypass, shown in pic), then larger Saab turbo 365 injectors, RRFPR, o2 simulator, and alittle praying to god lol. in all honesty its easier then it sounds. there are plenty of ppl with them on Corollas/MKI MR2's....just not too many 20v's. i could also buy forged lower compression pistons (9.1/1) and make away with the stock 10 lb pully, or upgrade to something like a NST 18psi pully ...most likely i'll just be selling it though.