Results 1 to 39 of 39

Thread: THE best 9mm home defense ammon is...?

Hybrid View

  1. #1
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    41
    Posts
    4,628
    Rep Power
    28

    Default

    all ammo is not created equal and dont be under the impression that after shots fired, the BG is going to run.

    I met someone in a course in november that survived a home invasion a few months prior. He fired .45gap rounds at the BG that had just broken down the front door, he was waiting at the end of the hall, because the knocks were suspecious, and he didnt reconize them. Soon as the BG (and his 2 accomlices) opened the door, they saw him standing 15+ feet away, the BG ran at him. The good guy drawed and fired 6 rounds, all of which got caught up in the the jean jacket and sweater that the BG was wearing. Once face to face he he put the muzzle up against the BGs side, and fired one round through the torso. BG drops to the ground, and starts reaching for a weapon, good guy fires one through the guys neck. 2 other guys left the get away car running in the driveway.

    So of 8 rounds fired, 6 got stuck in clothing. Needless to say, he did some ammo research after that Rounds fired were Rangers if i recall correctly.

    One of these days im going to do some of my own testing.

    Story was verified by the instructor and another student in the class (both personal friends of the guy).
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."

  2. #2
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    24

    Default

    Like danny mentioned. Not all ammo is created equally. That being said there is no one stop shop for your ammo needs. POA/POI, consistency, misfire, ftf/fte (ammo related), over penetration, under penetration, cleanliness, etc...

    Anytime i build a new gun i usually end up running atleast 50rds of about 8-10 types of personal defense ammo through it to narrow down the top 3 for final testing. Of those 3 i usually shoot an additional 100-150 rds of each out of the gun. IT GETS CRAZY EXPENSIVE but i atleast know that when i draw and shoot i know where the poa/poi is, felt recoil, penetration, and that its the best possible round on the shelf for my needs.

    Target ammo usually ends up being whatever the cheapest lead slingin bullet i can find is! Which will hopefully be some reloads soon.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.

  3. #3
    ...EXTERMINATE... cpearson's Avatar
    Join Date
    Jan 2008
    Location
    Rome, GA
    Age
    42
    Posts
    1,629
    Rep Power
    21

    Default

    Quote Originally Posted by Truegiant View Post
    Like danny mentioned. Not all ammo is created equally. That being said there is no one stop shop for your ammo needs. POA/POI, consistency, misfire, ftf/fte (ammo related), over penetration, under penetration, cleanliness, etc...

    Anytime i build a new gun i usually end up running atleast 50rds of about 8-10 types of personal defense ammo through it to narrow down the top 3 for final testing. Of those 3 i usually shoot an additional 100-150 rds of each out of the gun. IT GETS CRAZY EXPENSIVE but i atleast know that when i draw and shoot i know where the poa/poi is, felt recoil, penetration, and that its the best possible round on the shelf for my needs.

    Target ammo usually ends up being whatever the cheapest lead slingin bullet i can find is! Which will hopefully be some reloads soon.

    That is what I would absolutely love to do! My main problem now is actually acquiring any HP's! No one has any home defense ammo, in part I'm sure because of Obama, which is another story for another time. Nonetheless, I've found site's I can order ammo from, but most are backordered, taking roughly 3 - 4 weeks to arrive. There is a gun show coming to Rome this weekend, which I will be attending bright and early Saturday morning to scour the vendors for ammo, or even possibly a reloader. Anyone make their own rounds here? What is the general cost of purchasing start up materials? Reps will be given to EVERYONE as soon as I am able. Thanks for all of the input guys! It is GREATLY appreciated.

  4. #4
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    41
    Posts
    4,628
    Rep Power
    28

    Default

    Quote Originally Posted by cpearson View Post
    Anyone make their own rounds here? What is the general cost of purchasing start up materials? Reps will be given to EVERYONE as soon as I am able. Thanks for all of the input guys! It is GREATLY appreciated.
    Me and redefinedm3 just went 50/50 on a reloading setup. Allthough we are still in the test and tune phase, before producing bulk, it seems to be promising.

    Our estimated cost is about $7 per box of 50, 45acp. Sunk costs and our time are not included.
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."

  5. #5
    ...EXTERMINATE... cpearson's Avatar
    Join Date
    Jan 2008
    Location
    Rome, GA
    Age
    42
    Posts
    1,629
    Rep Power
    21

    Default

    Quote Originally Posted by Danny View Post
    Me and redefinedm3 just went 50/50 on a reloading setup. Allthough we are still in the test and tune phase, before producing bulk, it seems to be promising.

    Our estimated cost is about $7 per box of 50, 45acp. Sunk costs and our time are not included.
    Nice; that definitely sounds like the way to go then. I've got two other guys who want to go in with me here in Rome. Sounds like it would be worth the start up cost.

  6. #6
    Certified Gearhead
    Join Date
    Jun 2007
    Location
    Around
    Age
    47
    Posts
    451
    Rep Power
    20

    Default

    Quote Originally Posted by cpearson View Post
    There is a gun show coming to Rome this weekend, which I will be attending bright and early Saturday morning to scour the vendors for ammo, or even possibly a reloader.

    I just went to a gun show here in Macon this Saturday. The reloaded ammo has gone up recently. and for a box of 500 9mm reloaded target rounds was $147.00. If you break it down thats $0.29 a piece. So now that is more expensive than target rounds bought at Wal-Mart. I think reloading will be the way to go, if you are looking to saving money and doing some heavy range shooting. My father used to do a lot of reloading back in the day, when he was a police officer, and it ended up a lot cheaper in the long run if you dont mind a little bit of work.

  7. #7
    ...EXTERMINATE... cpearson's Avatar
    Join Date
    Jan 2008
    Location
    Rome, GA
    Age
    42
    Posts
    1,629
    Rep Power
    21

    Default

    Quote Originally Posted by 99hatch View Post
    I just went to a gun show here in Macon this Saturday. The reloaded ammo has gone up recently. and for a box of 500 9mm reloaded target rounds was $147.00. If you break it down thats $0.29 a piece. So now that is more expensive than target rounds bought at Wal-Mart. I think reloading will be the way to go, if you are looking to saving money and doing some heavy range shooting. My father used to do a lot of reloading back in the day, when he was a police officer, and it ended up a lot cheaper in the long run if you dont mind a little bit of work.
    That's what I was hoping to do. I have an engineering background, so love building machines and 'tinkering,' which should only heighten my reloading experience.

  8. #8
    ...EXTERMINATE... cpearson's Avatar
    Join Date
    Jan 2008
    Location
    Rome, GA
    Age
    42
    Posts
    1,629
    Rep Power
    21

    Default

    Quote Originally Posted by Danny View Post
    all ammo is not created equal and dont be under the impression that after shots fired, the BG is going to run.

    I met someone in a course in november that survived a home invasion a few months prior. He fired .45gap rounds at the BG that had just broken down the front door, he was waiting at the end of the hall, because the knocks were suspecious, and he didnt reconize them. Soon as the BG (and his 2 accomlices) opened the door, they saw him standing 15+ feet away, the BG ran at him. The good guy drawed and fired 6 rounds, all of which got caught up in the the jean jacket and sweater that the BG was wearing. Once face to face he he put the muzzle up against the BGs side, and fired one round through the torso. BG drops to the ground, and starts reaching for a weapon, good guy fires one through the guys neck. 2 other guys left the get away car running in the driveway.

    So of 8 rounds fired, 6 got stuck in clothing. Needless to say, he did some ammo research after that Rounds fired were Rangers if i recall correctly.

    One of these days im going to do some of my own testing.

    Story was verified by the instructor and another student in the class (both personal friends of the guy).

    Wow, that is a crazy story. I'm very glad the guy made it out alive. We were just broken into about two months ago and all I had at that time was a single shot .410 shotgun, which is practically useless against a home invasion. We did have an alarm system that scared the intruder off. Luckily, my Wife bought me a S&W M&P 9mm as a Valentines Day gift! So, after running some cheap rounds through it, I've been diligently researching and trying to locate home defense rounds. Eventually, I would love to acquire a reloader and begin shelling my own rounds. Thanks for the input!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!