Results 1 to 40 of 55

Thread: Ok, so it seems we need a gun discussion thread

Hybrid View

  1. #1
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    41
    Posts
    4,628
    Rep Power
    28

    Default

    Quote Originally Posted by d-ninja
    Why should it be brass if you're reloading??

    (I don't know much about guns, thus why I'm asking)

    EDIT: Nice gun, btw.

    brass is what typically ammo cases are made out of. Some companies use a very soft steel, which is acceptable but is not reloadable due to the properties of steel and i believe the primers they use are not removable. I believe some companies use aluminum cases, these too are not reloadable to my knowledge.

    Brass is by for the most desirable, it can be reused time and time again and is soft but strong (not harmful on the gun, but very safe).

    And just for kicks and giggles:

    BRASS


    STEEL with polymer coating


    ALUMINUM
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."

  2. #2
    Moderator BanginJimmy's Avatar
    Join Date
    Oct 2005
    Location
    Hiram, GA
    Age
    47
    Posts
    7,499
    Rep Power
    32

    Default

    Quote Originally Posted by Danny
    ALUMINUM


    I was in GA Ammo earlier today to pick up a price sheet and they had a bunch of .40 with aluminum cases that they reloaded.

  3. #3
    The Thread Reaper.. The Ninja's Avatar
    Join Date
    Mar 2006
    Location
    K-Town!
    Age
    37
    Posts
    7,655
    Rep Power
    32

    Default

    Quote Originally Posted by Danny
    brass is what typically ammo cases are made out of. Some companies use a very soft steel, which is acceptable but is not reloadable due to the properties of steel and i believe the primers they use are not removable. I believe some companies use aluminum cases, these too are not reloadable to my knowledge.

    Brass is by for the most desirable, it can be reused time and time again and is soft but strong (not harmful on the gun, but very safe).

    And just for kicks and giggles:

    BRASS


    STEEL with polymer coating


    ALUMINUM
    AH, I understand now. Before I thought "reloading" meant replacing the clip and continuing firing. I didn't know it meant reusing the bullet casing or whatever. Thanks.

  4. #4
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    41
    Posts
    4,628
    Rep Power
    28

    Default

    Quote Originally Posted by d-ninja
    AH, I understand now. Before I thought "reloading" meant replacing the clip and continuing firing. I didn't know it meant reusing the bullet casing or whatever. Thanks.

    reloading is taking the magazine out and replacing with another one.

    but "ammutnition reloading" is taking the spent brass (the shell thats ejected after the gun fires) and puting fresh powder, primer and a new bullet in it. You do this all at you own house using seperatly purchased materials. It saves money versus store bought ammunition.

    here is what a reloading press looks like. You can see three cases (brass) in the photo, each is at a different station. Each station preforms a different task (press the bullet on, pour powder, reshape case, deprime, and primer). just a lil fyi thats the general idea.
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."

  5. #5
    Senior Member SL65AMG's Avatar
    Join Date
    Mar 2005
    Age
    38
    Posts
    2,618
    Rep Power
    24

    Default

    Quote Originally Posted by Danny
    reloading is taking the magazine out and replacing with another one.

    but "ammutnition reloading" is taking the spent brass (the shell thats ejected after the gun fires) and puting fresh powder, primer and a new bullet in it. You do this all at you own house using seperatly purchased materials. It saves money versus store bought ammunition.

    here is what a reloading press looks like. You can see three cases (brass) in the photo, each is at a different station. Each station preforms a different task (press the bullet on, pour powder, reshape case, deprime, and primer). just a lil fyi thats the general idea.

    nice turret press.... is that yours???
    EF SQUAD FTMFW!!!!

  6. #6
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    41
    Posts
    4,628
    Rep Power
    28

    Default

    Quote Originally Posted by SL65AMG
    nice turret press.... is that yours???
    not yet.. hopefully in the future sometime
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."

  7. #7
    Senior Member SL65AMG's Avatar
    Join Date
    Mar 2005
    Age
    38
    Posts
    2,618
    Rep Power
    24

    Default

    Quote Originally Posted by Danny
    brass is what typically ammo cases are made out of. Some companies use a very soft steel, which is acceptable but is not reloadable due to the properties of steel and i believe the primers they use are not removable. I believe some companies use aluminum cases, these too are not reloadable to my knowledge.

    Brass is by for the most desirable, it can be reused time and time again and is soft but strong (not harmful on the gun, but very safe).

    And just for kicks and giggles:

    BRASS


    STEEL with polymer coating


    ALUMINUM

    there are no aluminum cases. its just nickel plated brass.... why, i don't know.

    brass is soft and malleable, resistant to heat and stress.... steel is not.... well mainly the flexible part. a shell must be re-sized before you can reload it.

    also... some manufacturers make rounds with a "boxer Primer" and some make them with "berdan primers".... its a little inaccurate because the primer is the same but one case has 2 holes, where the primers is and some have only one in the middle. the berdan primer i believe is the one with 2 holes....


    funny thing is, is that one was a European design and one was an American design. we, in America use the European design, and vice versa.


    when you remove a spent primer from a case, you use a die with a punch in the center to knock out the primer..... you cant do that with 2 holes that are offset.
    EF SQUAD FTMFW!!!!

  8. #8
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    41
    Posts
    4,628
    Rep Power
    28

    Default

    Quote Originally Posted by SL65AMG
    there are no aluminum cases. its just nickel plated brass.... why, i don't know.

    brass is soft and malleable, resistant to heat and stress.... steel is not.... well mainly the flexible part. a shell must be re-sized before you can reload it.

    also... some manufacturers make rounds with a "boxer Primer" and some make them with "berdan primers".... its a little inaccurate because the primer is the same but one case has 2 holes, where the primers is and some have only one in the middle. the berdan primer i believe is the one with 2 holes....


    funny thing is, is that one was a European design and one was an American design. we, in America use the European design, and vice versa.


    when you remove a spent primer from a case, you use a die with a punch in the center to knock out the primer..... you cant do that with 2 holes that are offset.

    There is aluminum cases.
    copied from ammo distributor website:

    CCI Aluminum cased Blazer

    *

    Aircraft-grade, heat-treated aluminum cartridge cases
    *

    Famous, sure-fire CCI priming *High-performance without high cost
    *

    Built to US quality standards *American-made

    Blazer cases are not intended to be reloaded.

    Available in 9mm, .40 and .45 acp

    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!