srsly
my 79 corolla / 83 starion
my 87 starion esi-r
mods: non running mod
otherwise stock w/ intake and exhaust
Starions/ Conquests suck balls
srsly
my 79 corolla / 83 starion
my 87 starion esi-r
mods: non running mod
otherwise stock w/ intake and exhaust
epic failure of a vehicle
Originally Posted by RandomGuy
Hmmm.......
My bro has 2 conquest,they seem ok for what they were back in the day?.I actually like them other than the wheels.
Don't rag the Conquest's. I love mine even though it's a headache.....
01' Mercedes C320 $10500 o.b.o. or trade 4 G35 coupe
http://www.importatlanta.com/forums/...9#post38098929
so you have 2 starions........ and neither of them run??
^ thats what you usually hear lol
i know of a guy with 8 of them and only 2 run lol
one of them he bought non-running, the other one...
I wouldn't want Hasan doing my wiring
most of them don't run because the owners are cheap asses
In fact I know of where one is sitting that the guy won't sell because he's going to give it to his son when he gets his driver. His son is 8 right now.
̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
I know a guy that has one that has great intensions to rebuild the motor with raceprepped rods, Weisco pistons, ARP Studs and try to make it bullet proof......one of them he bought non-running, the other one...
I wouldn't want Hasan doing my wiring
most of them don't run because the owners are cheap asses
In fact I know of where one is sitting that the guy won't sell because he's going to give it to his son when he gets his driver. His son is 8 right now.
Oh wait..... he already did and it FAILED...... now he's trying to lick his wounds and get it back together one more time....
01' Mercedes C320 $10500 o.b.o. or trade 4 G35 coupe
http://www.importatlanta.com/forums/...9#post38098929
because the machine shop didn't offer magnafluxingI know a guy that has one that has great intensions to rebuild the motor with raceprepped rods, Weisco pistons, ARP Studs and try to make it bullet proof......
Oh wait..... he already did and it FAILED...... now he's trying to lick his wounds and get it back together one more time....
̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Nah, remember, bad Wrist pin retaining clip.because the machine shop didn't offer magnafluxing
01' Mercedes C320 $10500 o.b.o. or trade 4 G35 coupe
http://www.importatlanta.com/forums/...9#post38098929
that too... just bad partNah, remember, bad Wrist pin retaining clip.
̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
who is he referring to?he already did and it FAILED...... now he's trying to lick his wounds and get it back together one more time....
stfu plzmost of them don't run because the owners are cheap asses
i spent more on my starion then you spent FOR your starion... lawl
speaking of which, did you ever mod a car instead of buying one that was already modded?
Last edited by RandomGuy; 10-24-2008 at 03:19 AM.
Yeah, that's what I've been doing with this one. I have a garage and room full of parts building :boobies: I just don't do shitty wiring
̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
room full of parts:Yeah, that's what I've been doing with this one. I have a garage and room full of parts building :boobies: I just don't do shitty wiring
BALLLINNNNNN
lol of course you won't do shitty wiring, there's no wiring involved with a stock ecu and tbi. lolol
btw there is nothing wrong with my wiring except for the fact that its not tucked, theres no wire looms, which to your, dumbfuck ass means 0mG bad wiring.
QTF....starions are gods bastard child of the automotive world lol
-Super cool .gif TO UNBAN JITB, JM, Buttons AND NEMISIS here-
No, I would have to say that would be the FIAT (Fix It Again Tony)
01' Mercedes C320 $10500 o.b.o. or trade 4 G35 coupe
http://www.importatlanta.com/forums/...9#post38098929
HAH....fiat guys laugh at Sorryons
-Super cool .gif TO UNBAN JITB, JM, Buttons AND NEMISIS here-
HAHAHAHAHAHAHAHA I laugh at starions
J/K
I own a Lancia Beta Spyder which is a Fiat.
Hey I like those cars.. Even though I have rx7.. But if u have time to jack off.. U shuld have time to work on your Starion..
Peek-a-boo mofucka what now?!
idk man, i sure do jack off a whole lot
-Super cool .gif TO UNBAN JITB, JM, Buttons AND NEMISIS here-
Sooo hassan.... You still got that corolla in the pics?
Got a 88 conquest rotting in my garage. If it was mine it would have been running a long time ago. I loved it when we first got it but now I hate it. All it does is sit in the garage and take up room that I really need. It hasn't moved in 2.5 years.
Sadly that's the downfall of some owners of these cars. Nothing against your pops, but the longer they sit, the harder they are to fix.
̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
Amen to that!
Formerly Daily Interlude
Well the only thing i have to say is they are one of the best 4 cylinders engines of all times but you need to do your job those engines are not for the do it yourselfers or wannabes out there they need to be understand and you need to know what you are doing and you need to know how to do it!
i see the picture of the broken piston and the only thing i have to say about it is that the engine in question there was a half ass build, first that piston failure was caused by a used of a stock polished unbalanced rod that may be was modified to be used as a full floating in a race piston (FAIL) you need to use a bushed good connecting rod like pauter, if you dont you are going to have those problems, second oil is the life of those engines if the oiling system is not upgraded you will FAIL again, remember the g54b was the first 4 cylinder engine in the 7's on the 1/4 mile, i have built them to go well over 650 WHP and no problems at all,
hey Hassan it is me Juan, how you doing? you say you spend a lot of $$$ on your starion? i really want to know how much LoL,
JK men, hope you doing good!
Last edited by dragoncelica; 11-10-2008 at 01:21 AM.
Funny - EP3sAreFun built an engine in his garage, put out pretty decent power. He now owns a car that has over 300whp, and oh look. That engine and car was also built in a garage. They're not for the wannabe's, thats for sure, but these are the ultimate DIY engine. Why? Because race shops won't even know where the "fuel rail" is ( lol ask EP3sAreFun about that one)
̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
OH SHIT JUANWell the only thing i have to say is they are one of the best 4 cylinders engines of all times but you need to do your job those engines are not for the do it yourselfers or wannabes out there they need to be understand and you need to know what you are doing and you need to know how to do it!
i see the picture of the broken piston and the only thing i have to say about it is that the engine in question there was a half ass build, first that piston failure was caused by a used of a stock polished unbalanced rod that may be was modified to be used as a full floating in a race piston (FAIL) you need to use a bushed good connecting rod like pauter, if you dont you are going to have those problems, second oil is the life of those engines if the oiling system is not upgraded you will FAIL again, remember the g54b was the first 4 cylinder engine in the 7's on the 1/4 mile, i have built them to go well over 650 WHP and no problems at all,
hey Hassan it is me Juan, how you doing? you say you spend a lot of $$$ on your starion? i really want to know how much LoL,
JK men, hope you doing good!
HOW THE FUCK HAVE YOU BEEN
oh yeah by alot i mean too many times the value of the car LOL
a lot has changed since you saw it last(when it was motor less)
fully built block, headwork,cam, MPI, big turbo, etc random stuff
I just gave up on it bro what have you been up to? Did you ever open up that shop in conyers?
http://www.youtube.com/watch?v=ONuXWYsKrtM
I've got an '86 TBI IROC-Z that would smoke that piece of shit
Too late. Let the baboons do that last weekend.....looks like you lose AGAIN!
http://www.youtube.com/watch?v=zfRIwA_s-Fc indeed welp nvm then
ok for every one that hates there starion just give it to me lol. no really though i am always working on my car im use to it.
So much hatred in the Starion world.
Where do I sign up?
^^ on the title of one. haha. buddy has a conquest, it ran, then turbo's oil seals blew, and now it sitting with a new turbo mounted to the mani, but it needs a new mani cuz its cracked.
lol i want one of these too...well did anyway. you guys killed it for me. didnt know they were that much of a pain in the ass.
they're not a PITA - randomguy just has had bad luck with his
̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿
they have probs that should be fixed before they break. so if you get one, have like a 1g saved up to replace stuff lol
Posting Permissions
Reply With Quote
