Quote Originally Posted by carrascopa
haha... nah man.. i want the method to it.. i know there is one ..
5. Finally correct the colors of the corner cubes!

Use the CORNER FLIPPER RIGHT or CORNER FLIPPER LEFT sequence. The CORNER FLIPPER RIGHT rotates one corner cube clockwise in place, and forces the next corner to rotate in the other direction. The CORNER FLIPPER LEFT rotates one corner cube anti-clockwise in its place, and forces the next corner to rotate in the other direction. Note that the CORNER FLIPPER RIGHT is equal to two CORNER FLIPPER LEFTs; so if you only want to learn 4 move sequences instead of 5, you can leave out one of the two CORNER FLIPPER sequences.


The CORNER FLIPPER RIGHT move sequence. Hold the whole cube like this before performing the sequence. Make sure the corner cube you want to make the right color is at the front!

The moves of the CORNER FLIPPER RIGHT sequence (advance from left to right):

The CORNER FLIPPER LEFT sequence. Hold the whole cube like this before performing the sequence. Make sure the corner cube you want to make the right color is at the front!

The moves of the CORNER FLIPPER LEFT sequence (advance from left to right):
Here you have to advance step by step zigzagging through the corner cubes. Choose the first to correct randomly or start next to an already correct corner.

There are three possibilities here:
5.1. If only one of the two corners rotated with the sequence gets the right color orientation, turn your Rubik's Cube so that the remaining wrong color corner cube is on the front at the top.

5.2. If both corner cubes get the right color orientation, use the sequence on one after the other of the corner cubes. Hold the whole cube carefully.

5.3. If two opposite corner cubes are the wrong colors, but the other two corners of the same layer are right, don't get frustrated. Use one of the CORNER FLIPPER sequences on one of the wrong and on one of the right corner cubes. This will make one corner right and the other corner wrong. Use the sequence on the corner that is now wrong and the corner that was wrong.

Ensure the cube you want to color-orientate is at the front and on top.

When only two corner cubes have the wrong color-orientation both will be OK if you have used the proper CORNER FLIPPER sequence. If you have done that you have solved the cube.


CONGRATULATIONS!

REP PLEASE!!!