Twin Turbo kit $7400 plus $2000 installed which was considered a discount
wheels & tires $3500 shipped to my door
modifying a G35 is EXPENSIVE!!!
Since the car isnt selling I'm thinking about going with forged internals, that will be about $4k-6k
Twin Turbo kit $7400 plus $2000 installed which was considered a discount
wheels & tires $3500 shipped to my door
modifying a G35 is EXPENSIVE!!!
Since the car isnt selling I'm thinking about going with forged internals, that will be about $4k-6k
comptech supercharger....3 grand for used kit plus about a grand for install
work emotion wheels with tires.... about 2 grand
jic magic exhaust 900 bucks
carbon trunk.... 700 bucks
carbon hood..... 500 bucks
stereo lol... around 4 grand
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
wtf ppl, list just ONE part or some as a whole? Is it that hard to understand? DO NOT LIST EVERY parts that you own.
Well, mine would be the H22a Engine alone or may be my Racing Hart M6, Part cost is about the same - 1600. But if talking about the section then the engine swap in all is more expensive.
Originally Posted by rupertaker
I have a $3500 freaking clutch. Don't think that's the most expensive thing on my car tho. I will have to get back with you on that.
jdm tight YO!
Stand alone engine management system, not a bad way to spend $10,000
Leisa and S. 4 Life NM?
in my bike, the 900 shock
my del sol- the 2000 in suspension
my eclipse, the 4000 wheel and tire combo, and hte 1000 exhaust
My 4.44 close ratio STI 5speed and rearend. $2500 for the tranny, driveshaft, 4 axles, and rear end.
Getting it installed into my formerly automatic car, priceless. I've been getting a lot of used/free stuff lately but nothing worth mentioning.
02 WRX Sport Wagon
HKS coilovers $2000
^^ Still rockin me in your sig!! Thanks man!!
Brett (One of the true OG's, No really... ask anyone)
'15 Chevy SS
'16 K7 SXL SWP
www.facebook.com/brett.lowenthal1
R.I.P Leisa, You are never forgotten - 10/7/08
man that quote was classic right there!!!^^ Still rockin me in your sig!! Thanks man!!
I forgot the $50,000 daily driver to haul the $200,000 POS.
$3000 for B16 swap & auto to manual, & now LS/VTEC forged internals another $3000
what kind of car is this?
Stupid Auto Supra, thats what I drive, And You Can
BUY MY CAR HERE
www.mountainboost.com
www.180pix.com
vortech v2 sq kit was $2200... but it ended up costin' over $3000 once you add in the price of 42lb injectors, 255lph intank fuel pump, fuel pressure regulator, powerpipe, the msd 6abtm, and the msd distributor... so it was probably more like $3500-4000 for the blower and all the parts to get it to cooperate.
Well I'm about to buy a complete closed deck built 2.65 motor for about $6,500....For my STI
Axis, Crawford?Well I'm about to buy a complete closed deck built 2.65 motor for about $6,500....For my STI
02 WRX Sport Wagon
Probably a Crawford
$8 Washer LEDs.
wtf? $1000 brake pads? are they gold plated and diamond lined?
Maybe everything is in the yen amount?
2500 for the half cut
800 for roll cage
700 for 2 way lsd
If it doesn't fit force it. If it breaks it was meant to be upgraded!
If it doesn't break you wern't driving hard enough!
the driver.... i'd say i'm worth about a cool 10 million due to my l33t skillz.
Im thinking its a touring car, track car...right?
Stupid Auto Supra, thats what I drive, And You Can
BUY MY CAR HERE
www.mountainboost.com
www.180pix.com
turbo & accessories = 1800.00
posted by 01dc2 jdm
its just a vtack engine.
jesus, i really hope some of those prices were a typo or joke
for me, only about 2500 for a turbo kit plus extras
about 3,000 total for my turbo setup
im about to spend another 3,500 on building another motor and putting on a bigger turbo.
Perrin Fmic 1200
Apex Motorsports 3in turbo back exhaust 950
hmmmmmmmm
CTR Transmission with Kaaz LSD from HMOTORSONLINE.COM-$1200
thats prob the most expensive part i have, other honorable mentions are:
RS MAchines Sleeved Block
Wiseco Pistons
Probe Rods
i think i paid around $2000, but it was a complete shortblock (that i later tore down cause i switched rods and piston combo to CP/Eagles)
I spent around $1500 on the headwork
$700 on the header
god im going to stop before i vomit
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
mine would have to be the wheels (which are still awaiting new powdercoat due to my lack of funds) 18x7.5" volk racing TE-37's. (i paid about a quarter what they were worth) then after that would be the system build when it was in its prime. jl12w3v2 ported box, mb quarts all the way around, xtant x1001 and x604 for the amps ect ect... i spent close to 5g's and did the install myself, so yeah....
my wheels and tires on the Focus ... $999.99 ( money courtesy of Star 94) wheels and tires installed by Butler Tire
my cusco cage 800.00
advans 980.00
type r front end 2500.00
and motor shit that still needs to be built
Dont even start listing stuff that begins with "DART"
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
$700+ flywheel
4 Falken Azenis RT-215s for my car are just under $300 so tyres are cheap for me...
My fidanzas have always been like 400 max. Whats up with yours that makes it expensive?
I forgot how cheap an s13 could be. Take my name out of your avatar. It just makes you look dumb.
Didn't DirtySouthDrifter buy his car with the sr already in it?
But wasn't it some blown up car? Or did Vick racing blow it up.
Wait...I get confused as to which car Vick Racing has blown up...
Dont even start listing stuff that begins with "DART"
hahahahahah your just scared
damn dude next time you need parts let me know. the aem i coulda got you one for 1800 with a wideband UEGO. I got the hoook up on gauges as well. Coulda got you whatever coilovers you wanted for 1k. I can get what tires you want a t wholesale cost. just let me know in advance.
Posting Permissions
Reply With Quote
