Results 1 to 7 of 7

Thread: Same Cobalt that was called out before?

Threaded View

  1. #3
    RIP Leisa! The Yousef's Avatar
    Join Date
    Mar 2005
    Location
    Woodstock
    Age
    41
    Posts
    23,188
    Rep Power
    48

    Default

    **edit**

    i'm a moron..this is the GM stage 3 package:
    http://www.crateenginedepot.com/stor...6kpndYSzAvegT7



    Take your Cobalt SS to the next level with our Stage 3 Off-Road kit!

    The Stage 3 kit consists of the following:
    • Smaller, 76mm supercharger pulley
    • 2-pass intercooler end plate
    • Unique PCM which includes a calibration for the smaller pulley, an adjustable rev limiter, a 100 octane mode, and a nitrous algorithm.

    Our Stage 3 kit will take your supercharged Ecotec to a whole new level of performance. Stage 3 takes horsepower output to 248 on 93 octane fuel and to 260 horsepower on 100 octane fuel.
    In addition to the power increase, you'll also get an adjustable rev limiter and calibration for a 50 shot of nitrous (nitrous kit not included).
    For best power, we recommend also installing a high-flow exhaust.

    The PCM is equipped with a user adjustable rev limit from 6750 to 8000 rpm. The rev limit is adjusted by pressing on the throttle pedal with the ignition on and engine off. At about 50% throttle the tachometer will show the current rev limit. Pressing the throttle further will adjust the rev limit in 250 rpm increments. This PCM is also equipped with a control scheme for the equivalent of a 50-horse shot of Nitrous. The PCM will automatically provide the proper spark and fuel for A Nitrous up to 500 rpm below the current selected rev limit when the trigger is activated. Click here to download Instruction sheet
    Last edited by The Yousef; 02-26-2007 at 02:01 PM.
    Val RIP
    Quote Originally Posted by Halfwit
    my only rule in life
    1: NEVER UNDER ANY CIRCUMSTANCES, DATE A GIRL OFF IA, OR TELL A GIRLFRIEND ABOUT IA.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!