sr20 240sx project CHEAP $3000

[m3th0d]

Hey, I have a project1991 240sx hatch for sale.
Blacktop sr20:
Forged eagle rods
Cosworth metal headgaket
Arp head studs
Ngk iridium spark plugs
Isis wide oil pan
K&N oil filter
Royal purple full synthetic oil
Vh45 injectors 370cc
Garrett t25
Greddy lightweight aluminum pulleys
Welded bov flange hotpipe
Greddy type rs bov
Greddy intercooler and piping
3” downpipe
Stage 3 clutch
Jecs maf
K&N air filter
Koyo aluminum racing radiator w/ 2 supersonic fans
Cx racing coilovers(10k front, 8k rear)
Greddy strut tower bar
Greddy turbo timer
Apexi sacf II
Pro comp air/fuel wideband
Pro comp ultralite boost gauge
Kenwood headunit
Walboro 255 fuel pump
New front calipers
New rotors all around
Cemi metallic pads on the front
Organic pads on the rear
25mm spacers on the fronts

Has power steering
The car currently needs larger injectors or could possibly do with a tune, one of the jecs 750cc injectors i had in it died on me so i put the stock ones in. the motors been bored and honed she was running awesome and had great pick up spiked at 15lbs before the injector change. It will idle fine with the 370s but will start to chop up when you give it gas it starts to lean out.

I had started to pull the sr and put it in an ae86 and had plans to put a ka in the 240 untill i ran into more important obligations with college, i did not reconnect the safc(manual can be found online) or the ignition wiring to the ecu so that would need to be redone for her to start. I honestly would love to keep her but i dont have the funds or the time to finish her up.

Its got a clean title and ALL the part and build receipts on the motor, it has been built professionally at a shop. The frame and the body are in immaculate condition no rust and the body is strait minus the paint. There is also a sharknose bumper and a hood the car. Im only looking for 3k, i know everything is worth more my loss is your gain. I need her gone quick i have classes to pay for, text me anytime 404 453 9248. Thanks for looking!

[-EnVus-]

Cheap lol

[ruah_23]

What are the parts that need install?

[m3th0d]

What are the parts that need install?

the safc neds to be wired in and the turbo timer, the car was recently running i have friends who can vouch. i changed out the injectors back to stock and unfortunately do not have time or the money to invest in getting it running again i had pretty much pulled the motor to put it in an ae86 and then found out i got a good paying job thats long distance thats going to help me with college :/