FS. 1990 240sx hatch w/rebuilt DOHC (project car)
started as a single cam auto. rebuilt a dohc and swapped to 5speed. car started knocking due to a rod not being torqued correctly. motor was rebuilt again and the turbo kit is close to being completed. before its picked up it will have the manifold, turbo, DP (just 90s down...will need to be completed to hook up to exhaust of your choice) oil lines ran, and all intercooler piping ran. will include a N60 maf as well as a stock maf and i have a few ecus and extra parts. ill have the car in the position where it will start up...but obviously if you drive it and hit boost with stock injectors and stock maf its not gona last to long.
im not in the position were i can spend money on this and its sittin in my parents driveway so it has to go.
few specs on it...
block was honed and deck was milled.
new Rings, new ACL bearings
Arp headstuds, cometic head gasket
new oem timing kit, and oil pump kit.
new water pump, new thermostat
new water temp sensor, new radiator hoses
new oem clutch, tranny has no grinds
NOW this is a project car. it needs the current speed sensor swapped(i have another one already) for the speedo to work. the front bumper will need to be trimed and put back on, theres a dent in the passenger fender, needs injectors and ecu for the turbo kit to be finished, and needs an electric fan. the clear coat is coming off all over, bumpers are faded. and a headlight motor. the suspension, interior, and exterior are completely stock.
ask any questions. and ill leave a link with the complete build thread...
http://www.maconracers.org/forum/showthread.php?t=8004
my bottom dollar price is $2000. not a cent less. car is located in Warner Robins GA, bout 2 hours south of atlanta. but i am willing to tow it up for the right deal
Reply With Quote
