Fresh Noobie

[MsTibTib]

8"

[JITB]

8"

i say your gonna have to go wider than that 8 and 9.5 to fit the kit right. Id suggest to try to find a lower offset wheel for the front im sure those 8 you have on there are probrably high 40+ offset. If you get a lower offset like a 20, you can get away with 9 - 10 all around... . u mayneed to trim the kit fender walls... make sacrfices!

[MsTibTib]

i say your gonna have to go wider than that 8 and 9.5 to fit the kit right. Id suggest to try to find a lower offset wheel for the front im sure those 8 you have on there are probrably high 40+ offset. If you get a lower offset like a 20, you can get away with 9 - 10 all around... . u may need to trim the kit fender walls... make sacrfices!

Yea I do think mine is 40+. I take that back with the 18x8 though because they just have a 18x7.5 with an offset of 42 and they have a 18x8.5 with an offset of 15 and another with 40. I could also do a 19x10.5 in the rear with an offset of 25. It doesn't have a 18x8 listed. If I trim the fender I probably will go with the 18x8.5, and 18x9.5(both with an offset of 15)

[BKgen®]

19x10? lolol.... Let me know how that works out for you

Anything 18x8.5 or wider will most likely rub if lowered, even with an offset of +30. Even if you run +25, I don't see it ending well with 19's. Not much room at all under there.

Ask me how I know.

Not bad so far though... just never been a fan of the Min style kits -- Or any kits for that matter. Front lip, maybe skirts and you're set IMO.