help with bleeding my clutch line.

[-EnVus-]

make sure the lil plunger is pumping in the master cylinder

[DeeAOne]

make sure the lil plunger is pumping in the master cylinder

i dont see why it wouldnt because its brand new. the plunger is working, but is the seal good inside, thats the question.

[-EnVus-]

i dont see why it wouldnt because its brand new. the plunger is working, but is the seal good inside, thats the question.

Ok first try this Disconnect the feed line that goes to the slave from the master and hold your finger over it while a person slowly presses the clutch.
That will check for pressure and also tell it it is a constant pressure to the finger or weak.