considering buying an FC

Printable View

Show 100 post(s) from this thread on one page

08-06-2010, 01:08 PM
kain

atf breaks down rubber seals.

Quote:

Originally Posted by Boosted FC

Ummm, so what about a Meet guys?

i have no school tuesday. wanna meet up after you get off from work someplace close like mellow mushroom?
08-06-2010, 02:28 PM
JITB

Atf is used to start motors that have been sitting for along time. Poured into the cylinders/housing is supposed to restore compression for those first starts.
08-06-2010, 03:26 PM
Boosted FC

Quote:

Originally Posted by kain

atf breaks down rubber seals.

i have no school tuesday. wanna meet up after you get off from work someplace close like mellow mushroom?

I would, but I do not drive the FC during the week.
08-06-2010, 03:27 PM
Boosted FC

Quote:

Originally Posted by JITB

Atf is used to start motors that have been sitting for along time. Poured into the cylinders/housing is supposed to restore compression for those first starts.

Isn't Wiki & Google great? lol
08-06-2010, 04:01 PM
rmeyer114

what whereabouts are you guys? tryin to find a job so i can get my insurance paid and get this thing tagged..sucks losing your temp job after u get a car.. and kain you think i should put that test pipe on that i got from adam? ...will it make it substantially louder? ... still tryin to get it quiet lol .. but dont really wanna run cats on it since i probably wont need emissions
08-06-2010, 05:22 PM
JITB

Quote:

Originally Posted by Boosted FC

Isn't Wiki & Google great? lol

yea it is, but ive done it plenty of times... used it to start the old 328 Diesel that sat for 5 years, and the 735 also. Used it also when i rebuild my ole protege motors.
08-06-2010, 11:22 PM
Boosted FC

Quote:

Originally Posted by rmeyer114

what whereabouts are you guys? tryin to find a job so i can get my insurance paid and get this thing tagged..sucks losing your temp job after u get a car.. and kain you think i should put that test pipe on that i got from adam? ...will it make it substantially louder? ... still tryin to get it quiet lol .. but dont really wanna run cats on it since i probably wont need emissions

I live in Dallas & work in Chamblee at the moment. Looking for something better & closer to the house.
08-07-2010, 08:41 PM
kain

i want your job soo bad sheldon.
08-07-2010, 09:09 PM
Machado

yup Sheldon you have a bad ass job. I told Paul if you guys ever need any help let me know, Im moving right down the street from there.

I didn't know you lived in dallas? we are practically neighbors.
08-08-2010, 12:02 AM
rmeyer114

im not far from chamblee ...livin in snellville and buford one weekends
08-08-2010, 08:24 AM
kain

Quote:

Originally Posted by Machado

yup Sheldon you have a bad ass job. I told Paul if you guys ever need any help let me know, Im moving right down the street from there.

I didn't know you lived in dallas? we are practically neighbors.

really? as do i. there are tons of rotary people in chamblee including myself, so a meetup in that area would have an ok turnout.
08-08-2010, 08:26 AM
kain

Quote:

Originally Posted by Machado

yup Sheldon you have a bad ass job. I told Paul if you guys ever need any help let me know, Im moving right down the street from there.

I didn't know you lived in dallas? we are practically neighbors.

really? as do i. there are tons of rotary people in chamblee including myself, so a meetup in that area would have an ok turnout.
08-08-2010, 02:21 PM
rmeyer114

well hopefully i get some insurance soon id be totally down for a rotary meet ....grr...need job...grrr
08-09-2010, 01:56 PM
Boosted FC

lol, you guys may get your wish soon. :yes:
08-09-2010, 11:59 PM
rmeyer114

my wish of insurance might come true soon im half tempted to goto the day laborer place and earn a quick few hundred
08-10-2010, 10:08 AM
kain

elaborate. another mazmart meet?
08-10-2010, 10:11 AM
Boosted FC

Quote:

Originally Posted by kain

elaborate. another mazmart meet?

No. I was referring to you guys wanting to work @ Mazmart.
08-10-2010, 11:30 AM
JITB

Tell paul to give me a opp sheldon I can handle the fwd mazdas, and 929s..:)
08-10-2010, 06:37 PM
rmeyer114

man i wish i could score a job over at mazmart lol
08-11-2010, 06:56 AM
Boosted FC

Quote:

Originally Posted by rmeyer114

man i wish i could score a job over at mazmart lol

Yeah, everyone says that.
08-11-2010, 12:12 PM
rmeyer114

hahaha..u get good discount up there?
08-11-2010, 01:03 PM
Boosted FC

On what? That place don't have a fucking thing unless you own a Miata or Protege.
08-11-2010, 02:12 PM
rmeyer114

oh damn for real?....wheres good places to go get 7 parts around here besides the internet !? maztrix is expensive as hell
08-11-2010, 02:14 PM
Boosted FC

Bryn @ RX7Restorations
08-11-2010, 07:01 PM
rmeyer114

gracieus wheres it at?
08-11-2010, 07:14 PM
VickNotic

Quote:

Originally Posted by rmeyer114

And yes still needs exhaust gaskets I scoped em out the other day and they're shot to the max...know where I can get center console trim and ash tray??and another mirror

I have a buddy that has a 88 or 89 rx7 motor is gone but jsut the shell with everything still in there, i think it' sbeen sitting in his backyard for like 2-3 years now. was planning on picking up the shell but i have no idea about rotary 8D and he's located in NC if anything lmk
08-11-2010, 07:49 PM
JITB

Quote:

Originally Posted by VickNotic

I have a buddy that has a 88 or 89 rx7 motor is gone but jsut the shell with everything still in there, i think it' sbeen sitting in his backyard for like 2-3 years now. was planning on picking up the shell but i have no idea about rotary 8D and he's located in NC if anything lmk

i need some parts!
08-12-2010, 10:09 AM
rmeyer114

id like a better condition'd interior if i can find that...i just found out a buddy of mine has an s5 in mint body and interior condition in his garage that doesn't run ...i wanna scoop it off him
08-12-2010, 11:16 AM
JITB

Let me scoop some parts from it...I got a lot of need
08-12-2010, 11:20 AM
Boosted FC

Quote:

Originally Posted by JITB

Let me scoop some parts from it...I got a lot of need

lol, you sure do. You need to come get those 4-piston Calipers from me
08-12-2010, 11:25 AM
kain

Quote:

Originally Posted by Boosted FC

lol, you sure do. You need to come get those 4-piston Calipers from me

wont help with braking. get a 97 subaru forrester brake MC and make a up a brace for it. said to be the best combo for the fc and the stopping power is perfect.
08-12-2010, 02:17 PM
Boosted FC

Quote:

Originally Posted by kain

wont help with braking. get a 97 subaru forrester brake MC and make a up a brace for it. said to be the best combo for the fc and the stopping power is perfect.

Oh really? You got this done yet?
08-12-2010, 09:38 PM
kain

read up sheldon.

http://www.rx7club.com/showthread.php?t=852021
08-13-2010, 12:07 AM
rmeyer114

buddy of mines wantin to do that to his 89 mx6
08-13-2010, 07:44 AM
Boosted FC

Quote:

Originally Posted by kain

read up sheldon.

http://www.rx7club.com/showthread.php?t=852021

Cool. I don't need to do that though....haha
08-13-2010, 11:09 AM
kain

just do the brace though. youll feel the difference.
08-16-2010, 11:38 AM
rmeyer114

gotta job now....insurance,mods,repairs, its on now !
08-16-2010, 01:44 PM
kain

Quote:

Originally Posted by rmeyer114

gotta job now....insurance,mods,repairs, its on now !

you have it backwards. its Insurance, repairs, mods.
08-16-2010, 02:17 PM
Boosted FC

Quote:

Originally Posted by kain

you have it backwards. its Insurance, repairs, mods.

lol, it is the truth though
08-16-2010, 10:20 PM
rmeyer114

yeah i agree.im not much for organization of words lol..i gotta get this thing to pass emissions so i can get it tagged ..peter you know if this thing will pass emissions if i get the gaskets for exhaust? or am i going to have to go a little farther with it ?

Show 100 post(s) from this thread on one page