94 civic hb kswap

[urcarislower]

Make: honda
Model: civic hatchback
Year: 1994
Mileage: unknown car title said exempt but the cluster in car said 96k but didn't work
Options: not many more of a race car lol
Engine: k24/k20
Vin#: 2hgeh235xrh512702

Mods:
Engine:
Bottom end is a k24a1 with standrad bore 87mm wiseco 12.5/1 pistons, Manley h beam rods, acl bearings rod&crank, type s oil pump, all balanced with balance sheet.

Head: is a type-s with supertech vavle/springs/retainers, kelford 179-b cams, rbc intake mani w/ hybrid racing 74mm TB, hybrid racing CAI, hybrid racing fuel rail, rc750 injectors, Arp head studs

Trans: is a 2009 civic si w/ a comp super single clutch(can upgrade it to a twin if wanted) stock axels 2 sets.

Engine management: kpro

Chassis: 94 eg hb w/ tokico blues and ground control coils, traction bars, back half cage, disk brakes all around, bwr RLCA's, carbon fiber hood/mirrors/wing, enkei rpf1s with new tire all around. Might be forgetting a thing or two

Interior is like barely there underwear lmao a dash some carpet 2 corbeau seats and door trim. No ac/ heater and none of it there if you wanted it.

Car is currently on a hondata preloaded tune thats similar in compression so it will need further tuning, cranks and runs and you can drive it but its not great i wouldn't try driving it anywhere. Clean and clear title in hand

Cons: no heat or ac
Speedometer doesn't work (have a k-tuned converter but don't have a working speedo)
Body's not flawless (needs painting of the bumpers and tailgate)

Asking price is 8000obo

Now on to the pics ( forgive them as its been raining the last couple days and I will get better one once I clean the car up hopefully this weekend)

[1civic]

Explain the std. bore piston.. you dropped an 87mm piston in there?

Do you have receipts for machine work?


And there is no such thing as a "Base Tune" clearly driving the car would only cause problems since A/F, cam timing, ign is W-E-T-F right now...LOL

[urcarislower]

Yes they are standard bore 87mm pistons and no they weren't just dropped in there, the time was taken to make sure the valve reliefs were put in the proper orientation and the cylinder walls were prep'd

Yes I have paper work from the machine shop

Base tune was the wrong wording should of said running a preloaded tune for a similar set that's already on the kpro software

Sorry for all the confusion

Edited the points 1civic made thanks guy

[1civic]

Yes they are standard bore 87mm pistons and no they weren't just dropped in there, the time was taken to make sure the valve reliefs were put in the proper orientation and the cylinder walls were prep'd

Yes I have paper work from the machine shop

Base tune was the wrong wording should of said running a preloaded tune for a similar set that's already on the kpro software

Sorry for all the confusion

Edited the points 1civic made thanks guy

Some folks don't know, so never assume that we do..

[urcarislower]

No reasonable offer overlooked. I have found another car I'd love to have. Someone wants the start of a great all motor street class car. Even has nitrous lines and solenoid that come with car. That's why the bore was left stock.

[urcarislower]

7k firm! Someone buy it

[clarkbenji]

7k firm! Someone buy it

Call me asap 6784998297