Gone.. Please Delete!!
What I have is a 1990 crx shell i picked up from J-rock several months back.. i HATE seeing it have to go without finishing it, but im moving and have no choice... to start with, the car MUST be towed from its current location and buyer MUST have towing capabilities..
Make:Honda
Model: CRX HF
Year:1990
Mileage: exempt
VIN: JHMED8360KS000224
Title in hand!!
This CRX is a HF body.. (which means it is already wired for MPFI, obd0) (this also means it HAS AIR CONDITIONING!!!!)
when i got it, there was no interior/ motor, suspension, etc...
currently,
Interior
Exterior
- Full interior.. There is only 2 pieces missing..
- SI seats
- SI gauge cluster
- SI door panels
- AMAZING black carpet
- Nifty trunk flooring with cargo door
- etc...
Brakes
- NEEDS WORK..
- it is all there though.. the only thing missing is the front bumper because i didnt think it was worth living...
- All moldings though, are currently inside the car.. nothing missing
- SI front lip will be included!!
- Headlights will come with 6k HIDS
Wheels
- DA Integra front brakes (new rotors and pads, surface rust included!)
- Integra Rear Disc brakes will be included with the car (needs new pads)
- Integra Master cylinder/ brake resevoir
Suspension
- 15" Gold Enkei EUM5s...
- Tires have good tread...
exaust
- stock, except the rear springs are cut.... a lot
![]()
- i will include 2 tokico lowering springs to replace them with though..
- front tie rod ends needs replacing
- Greddy Evo 2 muffler
- resonator
- High flow cat (or regular cat)
- all needs to be welded to fit..
engine for the little guy
VIN- 4320170
trans VIN- YS1- 1061199
- the engine i have is a B18A1 out of a 1992 Intergra, so it is OBD1... included will be.....
- FULL engine harness
- NEW gaskets/ seals (have receipts and excess gaskets [ie the head gasket])
- New timing belt, water pump, tensioner, etc.. (have receipt)
- JG 301 Stage 2 LS cams
- Unorthodox Racing Cam Gears
- Polyurethane Conversion Motor Mounts for Bseries into a CRX (have receipt)
- unkown aftermarket 4-2-1 header
- 450 cc DSM injectors (not installed)
- I will also include a spare LS head for building... (or w/e you wanna use it for)
- transmission and longblock ARE seperated, but can be reassembled if buyer prefers
everything is there to get the motor put into the car and cranked, and a couple of things need to make it driveable... any questions, LMK!!
here is the build thread i started up for it.. it will have a lot of 411 and best pics as well
http://www.importatlanta.com/forums/showthread.php?t=221072
Price for everything is gonna be $1500obo...
again, the only reason im selling is because im moving and need it gone...
onto the pics...
again, if you check the thread you can see a lot more pics as well..
Best means of contact is via text/call at 706-662-4098.. if i dont answer, just leave a message.. PMs are good too!! Thanks in advance IA































Reply With Quote



[/URL]