FS//FT 96 Teg LS--T Show Winner

[LS--T]

1996 Acura LS Turbo.

$13,000 OBO Still open to trades. Show me what you have!
Will entertain Trade offers. (NOT LOOKING FOR backyard PeeWee My mom and dad gave me this Civic BS) Serious Cars only. Show me the money or show me what you got!!!
Im at [email protected]

Completly and Professionally Built by the best HONDA Tuner in Tampa Bay (IMO) The car was built by John (LHT owner) and owner of the 600WHP plus Yellow Type R that was featured on the cover of Turbo Magazine this past Feb. 08. This Teg is the mini me version of it. Any questions on this car and John will verify anything you need. So I have proof.
Here is the site of the shop that built the car... lhtperformance.net
Outside
Complete In and Out Body Paint job done by the dealer (Factory Silver color code)
Type R Wing and Front Lip
Wings West Skirts and Rear Lip
98 and up Tails
17" VOLK Racing LE series rims with 80% rubber
Greddy EVO2 Exhaust
Complete Tokico Suspension setup

Motor:
265WHP on only 14lbs and pump gas with a mild tune. Lots more potential with a larger turbo and down pipe.
6month old Factory Purchased Acura Integra Type R Tranny with a Stage 3 Competition Clutch set up w/ fly wheel (yes LSD)
HONDATA S300 setup
The entire block and head was rebuilt for this turbo set up. The motor is begging for more Boost. Im satisifed with where its at now. But it has plenty more in it. Pulls hard in every gear. More specifics available for potential deals.

MODIFICATIONS TO ENGINE AND CAR
B18B Block
CRP Pistons and Rings 9:5:1 comp
Eagle H-Beam Rods
Complete Chemically cleaned Block and Head treatment
Port and Polish Head
Complete Skunk 2 Valve train
retainers, doubled springs ect
non-Vtec Crower Cams
Skunk 2 Intake Manifold
70mm Throttle Body
Custom Chrome Piping all around from LHT performance
Greddy Turbo and Manifold (This is where all the power is being held up at)
Walboro Fuel Pump
Cant remember injector size, I know they arent the ones with the Greddy kit.
TIAL sequential BOV
Custom Chromed Heat shield
EVO2 Can with 2.5 pipes
Hondata S300 Managment System
B18c5 Type R Tranny
Competition Clutch stage 3
w/ Lightened Flywheel
Fluidyne Radiator
FAAL Fans
JDM Honda MOMO Steering Wheel
TENZO R Racing Seats
DC Sports Bars all around
Camber kits front and rear
and of course an Alarm System.



Photos wont do it justice but here it goes.
This car has won a number of "Best Honda" "Best in Show" Best Motor" show catagories. This car is plenty of show and go with room to grow.

[LS--T]

Oh Almost forgot..

Has 118K on Body
About 40K on the Motor Build
and about 5K on the Type R Tranny.

[LS--T]

More Shots...

[IndianStig]

SICK!

bump from me unlike the kid with the RSX

[LIKEG6]

I have seen this thing riding around town a couple of times and it looks great!!

You should come out more often and hang out. If you want to I'll let you know where people actually hang out at.

[JDMEK18]

Man.. just clean!!! Love the teggy!

[mr.koupe]

seen this in person. very nice teg, well worth the money and very nice guy glws man

[MistaCee]

Man just sick and with the older front end too.

[FasTech]

Very nice, G/l with the sale!

[pt_tng]

damn thats clean yo g/l wit sale

[Vteckidd]

Nice car but for $13,000 you need to post up

More detailed pics
More info on the turbo setup (size, wg, injectors, etc)
Dyno Sheet
More detailed ENgine INfo (What pistons, rods, what exactl was replaced?)

Thats alot of cash for a sub 300whp car with no VTEC. For reference ILOVEBOOST sold his 630whp LS TUrbo for $14,000 an his was a 2000 model.

Your asking alot, so i would post as much info as possible, not saying your car isnt worth it, but from the info you posted it looks like a LS turbo with a decent paint job, which is a dime a dozen.

[IndianStig]

^It is 13k OBO, I reckon this car will go for $10-11k.^

Info would still be nice though.

Being built by a legit shop and with bling factor, its well worth the money. If someone were to buy this car and build an LS/VTEC then boost it, it would be sickkkkkkkkk.

[sikfricks]

nice to see someone else with that front end i thought about a conversion but everyone already has it

[southside]

^^^JUst ITR that Bit*h

[lmbluke]

clean, bump!

[Killer]

looks great man.. gl..

[matthewAPM]

this is by far one of my favorite tegs!

GL

[LS--T]

Thanks for the props.
Not in a rush whatsoever. Guys in Columbus know, I've talked about parting ways with this Teg for the past 4 months. I didnt build this car overnight, and so I wont just give her away. I entertaining offers. 13K is more than fair for this car and its level of build. Corners werent cut. The shop is more than reputable and will stand behind this cars reputation.

As far as Just being an LS-Turbo.... I havent had to worry about anything V-Tech Blowing past me as of yet. You can easily see the money that was put into this car. If I seriously thought V-TECH would have given me so much more. It wouldnt be nothing for me to add it. LS Motor is a far better platform to use out of the box for Boost. Who needs V-Tech when your boostin anyway?
More photos and serious details can and will be given to serious people.
Thanks

[Vteckidd]

Thanks for the props.
Not in a rush whatsoever. Guys in Columbus know, I've talked about parting ways with this Teg for the past 4 months. I didnt build this car overnight, and so I wont just give her away. I entertaining offers. 13K is more than fair for this car and its level of build. Corners werent cut. The shop is more than reputable and will stand behind this cars reputation.

As far as Just being an LS-Turbo.... I havent had to worry about anything V-Tech Blowing past me as of yet. You can easily see the money that was put into this car. If I seriously thought V-TECH would have given me so much more. It wouldnt be nothing for me to add it. LS Motor is a far better platform to use out of the box for Boost. Who needs V-Tech when your boostin anyway?
More photos and serious details can and will be given to serious people.
Thanks

First off its VTEC

Secondly, you have a 265whp LS, its a 14 second car.

Thirdly Youll be hard pressed to make over 350whp with a stock LS head, VTEC heads can make 600whp stock. ive done it.

You have a nice paint job, off the shelf exhaust(thats prob too small), Volks, an a lip kit.

Im sorry i dont see the $13,000 price tag.

Ive been around a long time, ive seen cars go for big money.

IF YOU WANT TO SELL IT PLEASE LIST MORE DETAILS.

You say you have a built motor with 40k miles but NO MENTION OF WHAT PARTS, WHAT WAS REPLACED, etc. I mean for all we know you could of thrown used rods an piston in it an reused the oil pan, timing belt, water pump, bearings, etc.

You posted 1 decently size pic, the rest are too small IMO.

You didnt post a dyno chart to show what the a/f ratio was or even back up the claim in power or even show a powerband.

I mean do you have a T3 Super 60 or a GT35R. Does it have a cool power band or some **** that doesnt spool till redline. An what is your redline? if you have a built head we can assume it spins to 8000. If its stock then it revs to 7000.

WHat manifold is it? Log? Tubular? What size Downpipe? What size Wastegate? Ebay knockoff Wastegate or Namebrand?

WHat kind of BOV?

PVC piping for your FMIC or name brand?

WHat injectors? Cheap DSM or are they RC or Precision?

I mean you want big money, you need to post BIG MONEY STATS

I dont see that.

[Paul_s]

thank god.. at first when i saw "show" i was like o ****.. but s**t Damn nice teg.. props for u man

[hondakid2]

trade for a type r hatch 98?

[LS--T]

Mr. Kidd

Thanks for the spelling lesson and time invested in sharp shooting threads.
Obviously you have enough time on your hands to do so. If you have been "around a long time" and are so proficient in your craft, then I congradulate you. I am trying to get out of this game and move on. I am almost 30 years old with a wife and two kids. I am entertaining offers and seeing whats available. Which you have done neither but sharp shoot without any intent nor have you indicated. I simply and clearly said that More photos and info will be given to SERIOUS people. You dont fit that catagory so find another thread to jack! What I gave for initial info was obviously good enough for the numerous people whom have already IM and emailed me offers. Since this ad didnt meet your threshhold for info, then find another. I am in Iraq at the present time and created this post from out here to guage interest. So I will only make the distant effort to get my wife to forward me photos and reciepts when there are serious people negotiating. The resources I have are limited. Like I said, Im in no rush. This car isnt going anywhere til I see what I like or the money is right. Thanks.

[bb4pimp]

^ yeah man you said it reight , and awesome teggy reps man,

[LIKEG6]

I have somethin with VTEC that will blow by you lol

[Vteckidd]

Mr. Kidd

Thanks for the spelling lesson and time invested in sharp shooting threads.
Obviously you have enough time on your hands to do so. If you have been "around a long time" and are so proficient in your craft, then I congradulate you. I am trying to get out of this game and move on. I am almost 30 years old with a wife and two kids. I am entertaining offers and seeing whats available. Which you have done neither but sharp shoot without any intent nor have you indicated. I simply and clearly said that More photos and info will be given to SERIOUS people. You dont fit that catagory so find another thread to jack! What I gave for initial info was obviously good enough for the numerous people whom have already IM and emailed me offers. Since this ad didnt meet your threshhold for info, then find another. I am in Iraq at the present time and created this post from out here to guage interest. So I will only make the distant effort to get my wife to forward me photos and reciepts when there are serious people negotiating. The resources I have are limited. Like I said, Im in no rush. This car isnt going anywhere til I see what I like or the money is right. Thanks.

Look *******, i was VERY POLITE.

I moderate this site, and if you read our RULES, it states to follow a certain template. It states to provide AS MUCH INFO AS POSSIBLE.

You also have a whopping 5 posts. So, being the new guy that you are no one knows ANYTHING ABOUT YOU so you have ZERO CREDIBILITY.

You are asking $13,000 and telling people to "SHOW YOU THE MONEY" and "DONT TRADE ME POS CARS FOR THIS GEM!"

Well then how about a some concrete info on what you have spent on the car.

I dont need your wife to post receipts but dont tell me you dont know what was done to the engine. You obviously have enough time in Iraq to post a 45 line paragraph to me.

If you SIMPLY HAVE NO IDEA what is done to the car, you just had someone build it for you, then POST THAT.

If you have so much money in the car why cant you say where its at?

Right now you have listed a car worth $6000-7000, there are 10 integras making that power with those mods for sale in atlanta right now.

Im just trying to help you sell your car, because all the guys saying "bump" or "i love this car its so clean" dont have the money to buy it and dont let it think that they agree with your asking price.

If you want people to pay that kinda dough, you better have more information.

I have an integra im going to try an sell for a friend for the same price as yours , an its NA, and i have 4 pages of mods done to it. I have receipts, etc.

Instead of taking offense, listen to me, your car WONT SELL without you posting the stuff i asked for. ANd im tempted to close this thread until you post more info, because it becomes a BUYER BEWARE the more an more you stall.

[LS--T]

Here goes...
B18B Block
CRP Pistons and Rings 9:5:1 comp
Eagle H-Beam Rods
Complete Chemically cleaned Block and Head treatment
Port and Polish Head
Complete Skunk 2 Valve train
retainers, doubled springs ect
non-Vtec Crower Cams
Skunk 2 Intake Manifold
70mm Throttle Body
Custom Chrome Piping all around from LHT performance
Greddy Turbo and Manifold (This is where all the power is being held up at)
Walboro Fuel Pump
Cant remember injector size, I know they arent the ones with the Greddy kit.
TIAL sequential BOV
Custom Chromed Heat shield
EVO2 Can with 2.5 pipes
Hondata S300 Managment System
B18c5 Type R Tranny
Competition Clutch stage 3
w/ Lightened Flywheel
Fluidyne Radiator
FAAL Fans
JDM Honda MOMO Steering Wheel
TENZO R Racing Seats
DC Sports Bars all around
Camber kits front and rear
and of course an Alarm System.

Everything was done in FL. either by myself and brother in Law.
or by John at LHT.

[Vteckidd]

was that so hard? good looks like you spent alot of money, free bump and good luck

[-S Double C-]

I vouch for the car it's clean, ive seen it around town a few times. And im not a newbie and i have plenty of credibility motha ****as!! LOL!

[LS--T]

Thanks, appreciate the props!

And thanks for the offers thus far. Havent seen the right one yet.

[MR.EM1]

bump good sh1t...be safe in iraq

[LS--T]

TTT

[GSRteg®]

I actually like this car and the body kit makes it look hot with an aggressive stance.

[LS--T]

Thanks
I tend to go for a clean yet classic look.

For those who have seen the car and gave props. Thanks

[gotrice?]

sick bro!!

[bigdare23]

Damn, people doing it like this on Benning now LOL. Mad props. Since this car was built by LHT, I pretty sure it hold up for a good minute, unlike local cars running around here. What can I say reliability cost money! I hope you get what you're asking for homie!

[LS--T]

Thanks for the note man!
Have had quite a few trade offers and am still looking around to see what else pops up.

[LS--T]

Bad Desert Weather Bump

[boostedb16]

this may be a dumb question but would you part the wheels? never hurts to ask.

[matthewAPM]

Look *******, i was VERY POLITE.

I moderate this site, and if you read our RULES, it states to follow a certain template. It states to provide AS MUCH INFO AS POSSIBLE.

WOO, im glad that you think ur a real badass because you a mod...

[LS--T]

this may be a dumb question but would you part the wheels? never hurts to ask.

Absolutley not, nice try.
Car comes complete as is.