Quote Originally Posted by green91 View Post
Check ignition timing with a timing light, make sure you're using the correct mark on the pulley.

High 16s while in any amount of throttle is very lean, are you setting the FPR with the vac hose off to set the idle pressure? An adjustable FPR really isnt necessary in most cases.

Im assuming you've got stock ECU?
I'll check with a timing light when possible.
Fuel pressure was set with the vac line off at idle. I needed the regulator because of the walbaro pump it was pushing my fuel pressure into the high 50s on idle. And yea stock p2t ecu.