My car has been jumpy in 1st and second gear since I first put the motor in back in February. What I mean is that it feels like you are pressing the gas and letting off over and over again so the car would jerk around front to back. I assumed that this was a clutch problem being as if I rode the clutch and drove it "just so" it wouldn't do that. I finally got around to swapping the clutch, flywheel, pressure plate, and throwout bearing this past weekend.
The same problem still seems to be happening. The only CEL I had before this weekend was for secondary 02 sensor. When I drove home from my buddies shop after replacing the clutch the speedometer no longer worked. I jumped the ECU and now it's throwing secondary 02 code and code 17. I left my Haynes manual at my parents house, but I am pretty sure that is the code for vehicle speed sensor. The sensor is plugged in and worked prior to clutch replacement.
Also, my idle is fluctuating. Up and down from about 1100 to 1400. Again, prior to clutch replacement the car idled fine at 900. Only CELs are code 65 (secondary 02) and 17 (VSS?).
Any ideas on these issues?




Reply With Quote


