Bypass vtec (knock sensor)

[JGilbert312]

Is it possible? I have a d16z6 with a p28 ecu. I do not have a knock sensor so can i run vtec without it?

how do you do what? use a p2p ecu on a OBD1 car? you cant, plain and simple...


if your car is OBD1, get a P28 ecu..

He has a p28. Since you have a D16z6 and you also have a P28 ecu, you don't need to worry about anything with a knock sensor at all...

I am confused, are you needing to run the wiring for vtec to the ecu, or are you just trying to bypass the vtec pressure switch? Both can be done easily.

If you are wanting to just run the wiring for vtec then you need to run the Vtec solenoid plug wire to A4, then you will need to run a wire to D6

Here is a pic of bypassing the pressure switch. It also shows where to wire the pins into the ecu plugs for Vtec to be wired up. I hope this helps.