b16 slow rev problem

[HolleyStyle]

just put a b16a into a 99 civic, got as tps code, ive tried to check it and the voltage is way high, so i put a new one on it and it does the same thing. but the problem is that it revs really slowly, any opinions as to what else i should be checking or is the tps what would be causing this problem

[JF868849]

Check the timing

[Theycall_Metue]

i believe the tps and map plug is interchangeable. make sure it isnt mixed up also.

[turbob20]

x2 on the plugs!

[RBS]

flywheel is too heavy





























TPS and MAP plugs are incorrect, timing is off, or ECU is bad.. im sure there is a CEL, check it and post the code.

[terrytowe22]

Can't u adjust the tps sensor?

[RBS]

Can't u adjust the tps sensor?

you can, but even a TPS sensor adjusted VERY wrong wont make a car rev THAT slow... only it being backwards or mix-matched plugs would do that.

[RBS]

now that i think about it, im assuming you are going from a D16y7 to a B16? if you are and you are using the original D16y7 engine harness, swap the 2 OUTER wires on the TPS plug... D16y7 throttle bodies use a backwards sensor. Although, if your coming from a D16y8 then disregard what i just posted LOLOL