Results 1 to 13 of 13

Thread: LS/VTEC Head gasket

Hybrid View

  1. #1
    www.MSSRACING.com SPOOLIN's Avatar
    Join Date
    Aug 2005
    Location
    Northwest Georgia
    Age
    42
    Posts
    5,777
    Rep Power
    28

    Default

    Quote Originally Posted by RBS View Post
    use cometic for custom sizes
    Please dont give bad advice. I wouldn't put cometic on my Lawn Mower.

    Golden Eagle takes OEM headgaskets and CNC machines them to work perfect with their LSVTEC conversion dowels. Otherwise, you can use an LS headgasket (for an 81mm-82mm bore) or a VTEC headgasket (for an 81mm-82mm bore) and take a dremel and open up the dowel holes on the exhaust side (to fit the LSVTEC Conversion dowels) a tad to let the dowel fit in it. Just take your time, ive been doing this for 6 or 7 years everytime and its never failed...takes literally 2 or 3 mins to do it. If using 83mm to 85mm you need to get the B20 Headgasket if you are wanting an OEM one to work off of.
    www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
    Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel

  2. #2
    Senior Member
    Join Date
    Jun 2006
    Age
    44
    Posts
    1,133
    Rep Power
    22

    Default

    Quote Originally Posted by SPOOLIN View Post
    Please dont give bad advice. I wouldn't put cometic on my Lawn Mower.

    Golden Eagle takes OEM headgaskets and CNC machines them to work perfect with their LSVTEC conversion dowels. Otherwise, you can use an LS headgasket (for an 81mm-82mm bore) or a VTEC headgasket (for an 81mm-82mm bore) and take a dremel and open up the dowel holes on the exhaust side (to fit the LSVTEC Conversion dowels) a tad to let the dowel fit in it. Just take your time, ive been doing this for 6 or 7 years everytime and its never failed...takes literally 2 or 3 mins to do it. If using 83mm to 85mm you need to get the B20 Headgasket if you are wanting an OEM one to work off of.
    You are not wrong either. I would use oem headgasket if it's std. bore. The std. b20 headgasket is 84mm, they do not make anything bigger for the b20. But you can use the b20 headgasket, if the bore is 84.5mm, I've done it. Like I stated with RBS, anything 85mm +, I rather use cometic headgasket. Anything std. bore I used oem ones. You guys aren't wrong, it's what you prefer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!